Table of Contents
Advertisement
4.14 Display Mask
4.14
Display Mask
Removing the Display Mask
Remove the display mask according to the following procedures and Figure 4-33.
1. Remove the following 5 seals on the display module in that order:
- Two black seals on the bottom
- Three black seals on the top
2. Remove the following 5 screws on the display module, in that order:
- Three M2.5x4.5 white flat-head screws on the top
- Two M2.5x4.5 white flat-head screws on bottom
3. Release the following 27 latches on the display mask, in that order:
- Eleven bottom latches
- Five latches on each of the left and right sides
- Six top latches
Figure 4-33 Removing the display mask
Satellite A100/A105 / TECRA A7
Maintenance Manual
4 Replacement Procedures
4-53
- Quick Links:
- Rtc Battery
Hide quick links:
Advertisement
Chapters
Table of Contents
