Table of Contents
Advertisement
4 Replacement Procedures
Installing the Display Mask
Install the display mask according to the following procedures and Figure 4-33.
1. Seat the display mask in the correct position and secure the following 27 latches, in that
order:
- Six top latches
- Five latches on each of the left and right sides
- Eleven bottom latches
2. Secure the display mask with the following 5 screws, in that order:
- Three M2.5x4.5 white flat-head screws on the top
- Two M2.5x4.5 white flat-head screws on bottom
3. Secure the following 5 seals to cover the screws, in that order:
- Two black seals on the bottom
- Three black seals on the top
4-54
Satellite A100/A105 / TECRA A7
4.14 Display Mask
Maintenance Manual
- Quick Links:
- Rtc Battery
Hide quick links:
Advertisement
Chapters
Table of Contents
