Error! Style not defined. Error! Style not defined.
2. Remove the HDD pack by pulling on the tab attached to the pack.
NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or
replace the HDD pack only if it fails.
3. Place the HDD pack on a flat surface such as a desk.
4. To separate the plate from the HDD, remove four M3x3 screws.
CAUTION: Do not apply pressure to the top or bottom of the drive.
5. To remove the 2
then remove the HDD door.
6. Remove the HDD pack by pulling on the tab attached to the pack.
Satellite A350 Maintenance Manual
Downloaded from
www.Manualslib.com
M3X3*4
.
Figure 4
3 Removing the main HDD plate
nd
HDD, remove two M2.5x4 HDD door screws that secure the HDD and
manuals search engine
4 Replacement Procedures
4-11