Table of Contents
Advertisement
Notes
• The sound fields for music and movie do not work
in the following cases.
– The multi channel input is selected.
– DTS-HD signals with a sampling frequency of
more than 48 kHz are being received.
– Dolby TrueHD signals with a sampling
frequency of more than 48 kHz are being
received.
– PCM signals with a sampling frequency of more
than 48 kHz are being received.
– DTS 96/24 signals are being received.
• The effects provided by the virtual speakers may
cause increased noise in the playback signal.
• When listening with sound fields that employ the
virtual speakers, you will not be able to hear any
sound coming directly from the surround speakers.
• When one of the sound fields for music is selected,
no sound is output from the subwoofer if all the
speakers are set to "LARGE" in the Speaker
settings menu. However, the sound will be output
from the subwoofer if the digital input signal
contains LFE signals, or if the front or surround
speakers are set to "SMALL", the sound field for
movie is selected, or "Portable Audio" is selected.
Tips
• Sound fields with DCS marks use DCS
technology. See "Glossary" (page 123).
• When a sound field with DCS mark is selected,
the Digital Cinema Sound lamp lights up on the
display window.
To turn off the surround effect
for MOVIE/MUSIC
Select "2ch Stereo" or "A.F.D. Auto" in the
Surround settings menu.
US
62
Resetting sound fields to
the initial settings
Be sure to use the buttons on the receiver for
this operation.
1,2
1
Press POWER to turn off the
receiver.
2
While holding down MUSIC,
press POWER.
"S.F. CLEAR" appears on the display
window and all sound fields are reset to
their initial setting.
2
Hide quick links:
Advertisement
Table of Contents
