Table of Contents
Advertisement
• SMALL
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select "SMALL" to activate
the bass redirection circuitry and output the
bass frequencies of each channel from the
subwoofer or other "LARGE" speakers.
Note
When one of the sound fields for music is selected,
no sound is output from the subwoofer if all the
speakers are set to "LARGE". However, the sound
will be output from the subwoofer if the digital input
signal contains LFE signals, or if the front or
surround speakers are set to "SMALL", the sound
field for movie is selected, or "Portable Audio" is
selected.
Tips
• The "LARGE" and "SMALL" settings for each
speaker determine whether the internal sound
processor will cut the bass signal from that
channel.
When the bass is cut from a channel, the bass
redirection circuitry sends the corresponding bass
frequencies to the subwoofer or other "LARGE"
speakers.
However, since bass sound has a certain amount of
directionality, it is best not to cut it, if possible.
Therefore, even when using small speakers, you
can set them to "LARGE" if you want to output the
bass frequencies from that speaker. On the other
hand, if you are using a large speaker, but prefer not
to have bass frequencies output from that speaker,
set it to "SMALL".
If the overall sound level is lower than you prefer,
set all speakers to "LARGE". If there is not enough
bass, you can use the equalizer to boost the bass
levels.
• The surround back speakers will be set to the same
setting as that of the surround speakers.
• When the front speakers are set to "SMALL", the
center, surround, and surround back speakers are
also automatically set to "SMALL".
• If you do not use the subwoofer, the front speakers
are automatically set to "LARGE".
Making settings with the
Speaker Pattern menu
2CH/
2CH/
A.DIRECT
A.DIRECT
A.F.D.
A.F.D.
INPUT
INPUT
RESOLUTION
RESOLUTION
MODE
MODE
HOME
HOME
1
Press GUI MODE repeatedly to
select "GUI ON".
"GUI MODE" appears in the display
window of the receiver and the GUI menu
appears on the TV screen. Press MENU if
the GUI menu does not appear on the TV
screen.
2
Press V/v repeatedly to select
"Settings", then press
The Settings menu list appears on the TV
screen.
3
Press V/v repeatedly to select
"Speaker", then press
4
Press V/v repeatedly to select
"Speaker Pattern", then press
.
Select "Speaker Pattern" according to the
speaker system which you are using. You
do not need to select the speaker pattern
after Auto Calibration.
MOVIE
MOVIE
MUSIC
MUSIC
NIGHT
NIGHT
SLEEP
SLEEP
MODE
MODE
GUI
GUI
1
MODE
MODE
2-5
MENU
or b.
or b.
continued
US
65
Hide quick links:
Advertisement
Table of Contents
