Procedure 2 Antennas' Connection Check - Toshiba Satellite P100 Series Maintenance Manual
Pc
Hide thumbs
Also See for Satellite P100 Series:
- Maintenance manual (311 pages) ,
- User manual (196 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Troubleshooting Procedures
Procedure 2
The wireless LAN function-wiring diagram is shown below:
Any of the connections may be defective. Disassemble the computer following the steps
described in Chapter 4,
Check 1
Make sure the wireless communication switch is "On".
If the switch is "Off", turn it "On". If the problem still occurs, perform Check 2.
Check 2
Make sure wireless LAN card (Mini-PCI) is firmly connected to the CN2200 on
system board. If the connector is defective, connect it firmly and perform
Procedure 1. If the problem still occurs, perform Check 3.
Check 3
Make sure that wireless LAN antenna cables (black and white) are firmly
connected to the connectors on Wireless LAN card. If wireless LAN antenna
cables are not connected properly, connect them firmly and perform Procedure 1.
If the problem still occurs, go to the procedure 3.
Satellite P100 Maintenance Manual
Antennas' Connection Check
Replacement Procedures
, and perform the following checks:
43
Advertisement
Chapters
Table of Contents
Troubleshooting
