Page 1 ® Satellite Series User’s Guide If you need assistance: ❖ Toshiba’s Support Web site pcsupport.toshiba.com ❖ Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information, see page 179 in this guide.
Page 2 TOSHIBA AMERICA INFORMATION SYSTEMS, INC. (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA,...
Page 3 Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's parallel port, monitor port, USB port, PS/2 port port and microphone jack.
Page 4: Industry Canada Requirement
Contact either: ❖ Toshiba’s Support Web site at pcsupport.toshiba.com. ❖ Or call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Industry Canada Requirement This Class B digital apparatus complies with Canadian ICES-003.
Page 5: Telephone Company Procedures
If trouble is experienced with this equipment, for repair or limited warranty information, please contact Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Support Centre within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273.
Page 6 provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.) In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer. Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm...
Page 7: Wireless Interoperability
USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: ❖...
Page 8: Wireless Lan And Your Health
The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized. In normal operating configuration, the LCD in the upright position, the distance between the antenna and the user should not be less than 20 cm.
Page 9 documentation that comes with the product. This device complies with the following radio frequency and safety standards. Canada – Industry Canada (IC) This device complies with RSS 210 of Industry Canada. The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population;...
Page 10 EU Declaration of Conformity TOSHIBA declares that this product conforms to the following Standards: This product is carrying the CE-Mark in accordance with the related European Directives. Responsible for CE-Marking is TOSHIBA Europe, Hammfelddamm 8, 41460 Neuss, Germany. VCCI Class B Information...
Page 11 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations.
Page 12: Device Authorization
The interference range of this equipment is less than 40m. 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-15-1048...
Page 13: Radio Approvals For Wireless Devices
The following restrictions apply: ❖ Do not disassemble or modify the device. ❖ Do not install the embedded wireless module into other device. ❖ 5.17 GHz to 5.23 GHz for indoor use only. Radio Approvals for Wireless Devices NOTE The following information is dependent on what type of wireless device is in your computer.
Page 14 Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ For private usage outside buildings across public grounds over less than Belgique: 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
Page 15 802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada Europe - Restrictions for Use of 5 GHz Frequencies in European Community Countries European Community Countries Austria Belgium, France, Switzerland/Lichtenstein Denmark, Finland, Germany, Greece, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Sweden, UK...
Page 16 ❖ This device must not be operated in ad-hoc mode using channels in the 5 GHz bands in the European Community. Ad-hoc mode provides a direct communication between two client devices without a Wireless LAN Access Point. ❖ This device must be used with Access Points that have employed and activated a radar detection feature required for European Community operation in the 5 GHz bands.
Page 17 802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada Approved Countries/Regions for use for the Intel Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries/regions in the following table.
Page 18: Bluetooth Wireless Technology Interoperability
Bluetooth Wireless Technology Interoperability ® Bluetooth Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless technology that is based on Frequency Hopping Spread Spectrum (FHSS) radio technology, and is compliant to: ❖ Bluetooth Specification as defined and approved by The Bluetooth Special Interest Group.
Page 19: Bluetooth Wireless Technology And Your Health
Always use Bluetooth cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA computer product support on Web site http://www.toshiba-europe.com/computers/tnt/ bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for...
Page 20: Regulatory Statements
The radiated output power of the Bluetooth Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 21 2. If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. 3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations.
Page 22 This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-15-1048 Direct Dial: 03-3457-4850...
Page 23 CD-RW drive, Multi-drive or any other optical drive. You could damage the drive. You would also be exposed to laser light or other safety hazards, resulting in serious injury. Always contact an authorized Toshiba service provider, if any repair or adjustment is required.
Page 24 Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 25 Sony Corporation. Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Toshiba is under license. Other trademarks and trade names are those of their respective owners.
Page 26: Table Of Contents
Keeping yourself comfortable ...40 Precautions...40 Important information on your computer’s Setting up your computer ...43 Setting up your software...44 Registering your computer with Toshiba ...45 Adding optional external devices...45 Connecting to a power source ...46 Charging the main battery...49 cooling fan ...42...
Page 27 Using the computer for the first time ...50 Opening the display panel ...50 Your computer’s features and specifications ...51 Turning on the power...51 Adding memory (optional) ...52 Installing a memory module ...52 Removing a memory module...58 Checking total memory ...61 Using the TouchPad™...61 Scrolling with the TouchPad™...
Page 28 Removing a disc with the computer on...100 Removing a disc with the computer off ...100 Caring for CD or DVD Discs ...101 Toshiba’s online resources ...101 Chapter 3: Mobile Computing...102 Toshiba’s energy-saver design...102 Running the computer on battery power ...102 Battery Notice ...103...
Page 29 Charging batteries...105 Charging the main battery...105 Charging the RTC battery...106 Monitoring main battery power...107 Determining remaining battery power...109 What to do when the main battery runs low ...110 Setting battery alarms...111 Conserving battery power ...112 Power Schemes ...112 Using a hot key to set the Power Scheme...113 Changing the main battery ...114 Removing the battery from the computer ...114 Inserting a charged battery ...116...
Page 30 Using a supervisor or user password ...154 Setting a supervisor password...154 Deleting a supervisor password...155 Toshiba Password Utility ...155 PC Diagnostic Tool Utility ...157 TOSHIBA Hotkey Utility...158 TOSHIBA SD™ Memory Card Format Utility ...159 Mouse Utility...160 Toshiba Hardware Setup...161 ® port...145...
Page 31 TOSHIBA Zooming Utility...163 CD/DVD Drive Acoustic Silencer ...164 TOSHIBA Accessibility ...165 Fingerprint Authentication Utility...166 Fingerprint utility limitations ...166 Fingerprint Enrollment ...167 Fingerprint Logon ...168 Power-on Security ...169 Control Center...170 Password Bank ...172 Care and maintenance of your fingerprint Fingerprint reader limitations ...178 Chapter 6: If Something Goes Wrong ...179...
Page 32 Wireless networking problems...206 DVD operating problems...209 Develop good computing habits ...212 Data and system configuration backup in If you need further assistance...219 Before you contact Toshiba ...219 Contacting Toshiba ...220 Other Toshiba Internet Web sites...221 Toshiba’s worldwide offices...221 Appendix A: Hot Keys...223 Volume Mute ...223...
Page 33 Appendix B: Power Cord/Cable Connectors... 232 Appendix C: Using ConfigFree™ with your Toshiba Computer ... 233 Getting Started...234 Starting ConfigFree ...234 ConfigFree Utilities...236 Connectivity Doctor ...236 Search for Wireless Devices ...239 Profile Settings ...244 ConfigFree SUMMIT...248 Quick Connect...252 Using the Automatic Switch...255 Semi-Automatic Switch Feature ...255...
Page 34: Introduction
2002/95/EC, Restriction of the use of certain Hazardous Substances in electrical and electronic equipment (RoHS), which restricts use of lead, cadmium, mercury, hexavalent chromium, PBB, and PBDE. Toshiba requires its notebook component suppliers to meet RoHS requirements and verifies its suppliers’ commitment to meeting RoHS requirements by conducting component sampling inspections during the product design approval process.
Page 35: This Guide
Toshiba’ s Web site at pcsupport.toshiba.com. While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/component/ options availability are all subject to change without notice.
Page 36: Safety Icons
Introduction Safety icons Safety icons This manual contains safety instructions that must be observed to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and icons highlight these instructions as follows: Indicates an imminently hazardous situation which, if not...
Page 37: Other Icons Used
Your computer comes with the following documentation: ❖ An electronic version of the user’s guide (this document) ❖ It may also contain guides for other programs that may come with your system. For accessory information, visit Toshiba’s Web site at accessories.toshiba.com. Introduction Other documentation...
Page 38: Service Options
To stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at pcsupport.toshiba.com. If you have a problem or need to contact Toshiba, see Something Goes Wrong” on page 179. “If...
Page 39: Chapter 1: Getting Started
Chapter 1 Getting Started This chapter provides tips for working comfortably, summarizes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations.
Page 40: Keeping Yourself Comfortable
Extreme heat, cold, or humidity. ❖ Liquids and corrosive chemicals. Keeping yourself comfortable The Toshiba Instruction Manual for Safety and Comfort, that shipped with your computer, contains helpful information for setting up your work environment and tips for working comfortably throughout the day.
Page 41 Never allow any liquids to spill into any part of your computer, and never expose the computer to rain, water, seawater or moisture. Exposure to liquid or moisture can cause electric shock or fire, resulting in damage or serious injury. If any of these eventualities should accidentally occur, immediately: 1.
Page 42: Important Information On Your Computer's Cooling Fan
Getting Started Selecting a place to work ❖ Keep the computer and disks away from objects that generate strong magnetic fields, such as large stereo speakers. Information on disks is stored magnetically. Placing a magnet too close to a disk can erase important files. Handle discs carefully.
Page 43: Setting Up Your Computer
Always make sure your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Standby mode). In this condition, observe the following: ❖...
Page 44: Setting Up Your Software
Getting Started Setting up your computer To register your computer online or to sign up for an Internet account, you must either establish a Local Area Network (LAN) connection, or connect the built-in modem (available on certain models) to a telephone line (see modem to a telephone line”...
Page 45: Registering Your Computer With Toshiba
Registering your computer with Toshiba Product registration is strongly recommended, and allows Toshiba to send you periodic updates, announcements, and special offers applicable to your product. Product registration can be completed during the initial start up process of your computer.
Page 46: Connecting To A Power Source
Getting Started Connecting to a power source ❖ Connect a mouse (see ❖ Connect a full-size keyboard (see keyboard” on page ❖ Connect an external monitor (see devices” on page ❖ Connect a local printer (see page ❖ Connect an optional external disk drive (see an optional external diskette drive”...
Page 47 TOSHIBA Battery Charger (that may have been provided with your computer), or use AC adaptors and battery chargers specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor or Battery Charger could cause fire or damage to the computer possibly resulting in serious injury.
Page 48 Getting Started Connecting to a power source Plug the AC adaptor cord into the DC-IN on the back of the computer. (Sample Illustration) Connecting the AC adaptor cord to the computer Connect the power cord/cable to a live electrical outlet. The AC power light on the indicator panel glows blue.
Page 49: Charging The Main Battery
NOTE If the AC power light flashes amber during charging, either the main battery is malfunctioning, or it is not receiving correct input from the AC power supply. Disconnect the AC power cord/cable and remove the main battery pack. See page 114 Charging the main battery Your computer came with its battery already installed.
Page 50: Using The Computer For The First Time
Getting Started Using the computer for the first time Using the computer for the first time The computer is now ready for you to turn it on and begin using it. Opening the display panel Slide the display latch to the right. Lift the display panel.
Page 51: Your Computer's Features And Specifications
Your computer’s features and specifications Certain notebook chassis are designed to accommodate all possible configurations for an entire product Series. Your select model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features.
Page 52: Adding Memory (Optional)
You may want to increase the computer’s memory if you use complex software or process large amounts of data. NOTE Before adding external devices or memory, Toshiba recommends setting up your software. See software” on page Installing a memory module Additional memory modules can be installed in the memory module slots on the base of the computer.
Page 53 Installing a memory module with the computer’s power on may damage the computer, the module, or both. The computer has two memory slots—Slot A and Slot B. You can install one or two memory modules. Before you install or remove a memory module, turn off the computer using the Start menu.
Page 54 Getting Started Adding memory (optional) Close the display panel and turn the computer upside down to locate the memory module slot cover. (Sample Illustration) Locating the memory module slot cover Using a small Phillips screwdriver, unscrew the screw that secures the memory module slot cover. (Sample Illustration) Unscrewing the memory module slot cover Remove the memory module slot cover.
Page 55 Place the screw and the cover in a safe place so that you can retrieve them later. Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up. Avoid touching the connector on the memory module or on the computer.
Page 56 Getting Started Adding memory (optional) Pick up the memory module by its sides, avoiding any contact with its connector. Position the module toward the socket, aligning the connector’s notch with the matching key in the socket. notch latch (Sample Illustration) Aligning the memory module with the socket Firmly press the memory module into the memory slot’s socket at approximately a 30-degree angle (to the horizontal surface of the computer).
Page 57 Once the module’s connector is fully inserted into the socket, press downward on the top edge of the module to seat the module into the latches at the sides of the socket. These latches should “snap” into place securely with the corresponding cutouts in the side of the module.
Page 58: Removing A Memory Module
Getting Started Adding memory (optional) Replace the memory module slot cover and secure it using the screws. Re-insert the main battery. For more information on inserting the main battery, see battery” on page Turn the computer right side up. Reconnect the cables. Restart the computer.
Page 59 Do not try to remove a memory module with the computer turned on. You can damage the computer and the memory module. Do not remove the memory module while the computer is in Standby or Hibernation mode. The computer could hang up the next time you turn it on and data in memory will be lost.
Page 60 Getting Started Adding memory (optional) Gently lift the memory module to a 30-degree angle and slide it out of the slot. (Sample Illustration) Removing the memory module Replace the memory module slot cover and tighten the screws. Re-insert the main battery. For more information on inserting the main battery, see battery”...
Page 61: Checking Total Memory
Checking total memory When you add or remove a memory module, you can check that the computer has recognized the change. To do this: Click Start, Control Panel, Performance and Maintenance, and then System. The General tab view automatically appears and shows total memory.
Page 62: Scrolling With The Touchpad
Getting Started Using the TouchPad™ Once you have positioned your cursor, you can click it into place by either double-tapping the TouchPad or clicking the control buttons. Scrolling with the TouchPad There are two active regions on the TouchPad to scroll as you would with any wheel device on a mouse or trackball.
Page 63 Click the TouchPAD ON/OFF tab. The TouchPAD ON/OFF tab view window appears. (Sample Image) TouchPAD ON/OFF screen Select Disable or Enable, whichever is appropriate. Click Apply. Click OK. The Mouse Properties window closes. Close the Printers and Other Hardware window. Close the Control Panel window.
Page 64: Using The Dual Mode Pad
❖ Left button: Opens the assigned email application ❖ Middle button: Opens the ConfigFree utility (see the Toshiba online Help for more information) ❖ Right button: Sends the item in the active window to the printer TOSHIBA...
Page 65 The other three virtual buttons have no default settings. You must configure these buttons in the Mouse Properties dialog box before they can be used. In order to use the virtual buttons you must first enable Dual Mode in the Mouse Properties dialog box. After that, you can use the virtual buttons as follows: Tap the mode switch button to enable the virtual buttons.
Page 66: Configuring Virtual Buttons
Getting Started Using the Dual Mode Pad Select Dual Mode. Select Switch to Button Mode by tapping in the upper- right corner. To force the Dual Mode Pad to use Button Mode only whenever an NOTE external pointing device such as a mouse is plugged in, select Always in Button Mode when an external device is plugged in.
Page 67: Using External Display Devices
Using external display devices Your computer comes with a built-in LCD display, but you can also connect an external display device to an available video port, as follows: ❖ An external monitor or projector via the RGB (monitor) port ❖ A standard TV, projector, VCR, or DVD recorder/player via the S-video (TV-out) port (available on certain models)
Page 68: Directing The Display Output When You Turn On The Computer
Getting Started Using external display devices Directing the display output when you turn on the computer Once you have connected an external display device, you can choose to use the internal display only, the external device only, or both simultaneously. The quickest way to change the display output settings is to use the display hot key ( Press While holding down...
Page 69: Adjusting The Quality Of The External Display
TECHNICAL NOTE: You can also change these settings using the Display Properties box. Set the option for the video controller by clicking Start, Control Panel, Appearance and Themes, and then Display. Choose the Settings tab, click the Advanced button, select Display Device, select the applicable Monitor type, and then click Apply or OK.
Page 70: Using A Mouse
Getting Started Using a mouse Using a mouse You may want to use a mouse instead of the computer’s built- in TouchPad or Dual Mode Pad. You can use a USB- compatible mouse. After logging on to your system, the mouse cursor may move NOTE to the upper-right side of the screen.
Page 71: Setting Up A Printer
If your printer supports Plug and Play, your computer will automatically recognize the printer; the printer is then ready for use. Refer to your printer documentation for further instructions. TECHNICAL NOTE: To determine if your printer supports Plug and Play, check its documentation. If your printer does not support Plug and Play, you can set up the printer as described in To connect a printer to your computer:...
Page 72: Connecting An Optional External Diskette Drive
Getting Started Connecting an optional external diskette drive Click Add a printer. The Add Printer Wizard appears. (Sample Image) Add Printer Wizard Follow the on-screen instructions to set up your printer. Connecting an optional external diskette drive Some operations, such as creating a password service diskette, require a diskette drive designed for use with 3.5- inch diskettes.
Page 73: Turning Off The Computer
To connect an optional external USB diskette drive, connect the cable to one of the computer’s USB ports. (Sample Illustration) Connecting an optional external USB diskette drive Turning off the computer Pressing the power button before shutting down the Windows work.
Page 74: Hibernation Mode
Getting Started Turning off the computer Turn Off or Shut Down Factors to consider when choosing either Turn Off or Shut Down: ❖ Use the Turn Off command if you are using Windows XP Home, or either Windows Windows connected to a domain server. ❖...
Page 75 ❖ Restarting from Hibernation takes less time and consumes less main battery power than restarting from turning off the computer. ❖ Since information is being retrieved from the hard disk rather than from memory, restarting from Hibernation takes a little more time and consumes more main battery power to start up than when restarting from Standby.
Page 76: Using The Turn Off Computer Or Shut Down Commands
Getting Started Turning off the computer ❖ When starting up again, the computer returns to the mode in which you left it, including all open programs and files you were using. If you power down using the Standby command and the main battery discharges fully, your unsaved information will be lost.
Page 77: Using And Configuring Hibernation Mode
Shut Down For Windows connected to a domain server, follow these steps to turn off the computer: Click Start, and then Shut down. The Shut Down Windows Select Shut down from the drop-down list. Click OK. The computer shuts down completely. Restarting your computer To start the computer up again, press the power button until the on/off light glows blue.
Page 78: Using And Configuring Standby Mode
Getting Started Turning off the computer Configuring Hibernation mode options You can place the computer into Hibernation mode by either pressing the power button or closing the display panel. You can also specify an amount of time after which the computer automatically goes into Hibernation mode.
Page 79: Closing The Display Panel
Getting Started Turning off the computer The computer saves the status of all open programs and files, turns off the display, and enters into a low-power mode. The on/off light blinks amber indicating the computer is in Standby mode. Configuring Standby mode options You can place the computer into Standby mode by either pressing the power button or closing the display panel.
Page 80: Caring For Your Computer
Getting Started Caring for your computer Caring for your computer This section gives tips on cleaning and moving your computer. For information about taking care of your computer’s battery, see page 117. Cleaning the computer Keep liquids, including cleaning fluid, out of the computer’s keyboard, speaker, and other openings.
Page 81: Using A Computer Lock
You may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional computer lock cable. For more information on purchasing a cable lock, visit accessories.toshiba.com. (Sample Illustration) Computer lock cable To secure the computer: Wrap the cable through or around some part of a heavy object.
Page 82: Chapter 2: Learning The Basics
Chapter 2 Learning the Basics This chapter gives some computing tips and provides important information about basic features. Computing tips ❖ Save your work frequently. Your work stays in the computer’s temporary memory until you save it to the disk. If the network you are using goes down and you must restart your computer to reconnect, or your battery runs out of charge while you are working, you will lose all work since you last saved.
Page 83 ❖ Back up your files to disks (or other removable media) on a regular basis. Label the backup copies clearly and store them in a safe place. It is easy to put off backing up because it takes time. However, if your hard disk suddenly fails, you will lose all the data on it unless you have a separate backup copy.
Page 84: Using The Keyboard
Learning the Basics Using the keyboard Using the keyboard Your computer’s keyboard contains character keys, control keys, function keys, and special Windows the functionality of a full-size keyboard. (Sample Illustration) Keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: ❖...
Page 85: Function Keys
Function keys The function keys (not to be confused with the 12 keys at the top of the keyboard. (Sample Illustration) Function keys through programmed functions when pressed. Used in combination with the specific functions on the computer. For example, off the TouchPad or Dual Mode Pad.
Page 86: Starting A Program
Learning the Basics Starting a program Starting a program The easiest way to start a program is to double-click the name of the file that contains the information you want to work on. To find the file, use My Computer or Windows If you prefer to open the program first, you have four options.
Page 87: Starting A Program From Windows Explorer
Starting a program from Windows If a program is not listed in the All Programs menu, you can start it from Windows you a view of your computer’s contents as a hierarchy or “tree.” You can easily see the contents of each drive and folder on your computer.
Page 88: Starting A Program From The Run Dialog Box
Learning the Basics Starting a program Starting a program from the Run dialog box This example uses the Run command to start WordPad: Click Start, and then Run. The Run dialog box appears. (Sample Image) Run dialog box In the Run dialog box: ❖...
Page 89: Saving Your Work
Saving your work Before you turn off the computer, save your work on the hard disk drive, diskette, flash media or CD. This is one of the most important rules of computing. TECHNICAL NOTE: Save your data even when you are using the Standby command, in case the main battery discharges before you return to work.
Page 90: File Names
Learning the Basics Saving your work Choose the drive and folder where you want your file to be stored. Type a file name, then click Save. HINT: To make another copy of the file you are currently working with, choose Save As from the File menu and give the new file a different name.
Page 91: Printing Your Work
Printing your work Ensure the operating system is set up for your printer as described in HINT: You only need to set up the printer the first time you connect it. If you use more than one printer or are changing printers, you will need to set up the Windows system to run with the additional printer(s).
Page 92: Backing Up Your Work
Learning the Basics Backing up your work Backing up your work Back up all the files you create in case something happens to your computer. You can back up your files to different types of media such as CDs, DVDs, diskettes, or to a network, if available.
Page 93: Using The Optical Drive
Using the optical drive Optical storage has become the preferred medium for software, music, and video. Digital versatile discs (DVDs) provide a significant increase in data storage and support features that are not available on any other video platform. These features include wide-screen movies, multiple language tracks, digital surround sound, multiple camera angles, and interactive menus.
Page 94: Media Control Buttons
Learning the Basics Using the optical drive Drive in-use indicator light—Indicates when the drive is in use. Eject button—Press to release the disc tray. Do not press the eject button or turn off the computer while the drive in-use indicator light is glowing. Doing so could damage the disc or the drive.
Page 95: Inserting A Compact Disc
The CD/DVD button activates a media playing application that can play audio CDs or DVD movies when the computer is powered off. The following chart describes the CD/DVD button functionality. Power is off or the computer is in Hibernation mode and you press the CD/DVD button Operating system is...
Page 96 Learning the Basics Using the optical drive Press the drive’s eject button. The disc tray slides partially out of the drive (about 1 inch). Grasp the tray and pull it fully open. (Sample Illustration) Drive tray fully extended Hold the disc by its edges and check that it is free of dust. If the disc is dusty, clean it as described in CD or DVD Discs”...
Page 97: Playing An Audio Cd
If you insert the disc incorrectly, it may jam the drive. If this happens, contact Toshiba support for assistance. Push the disc tray in by pressing gently on the center of the tray until it clicks into place.
Page 98: Playing Cds/Dvd
Learning the Basics Using the optical drive Stop button Play/Pause button (Sample Image) Windows Media Player screen The Windows Media Player control panel works much like an ordinary compact disc player: ❖ To play the CD or to pause, click the Play/Pause button. ❖...
Page 99: Creating A Cd/Dvd
These problems are not due to any defect in your Toshiba computer or optical drive. Please refer to your computer's product specification for listing of specific format compatibilities.
Page 100: Removing A Disc With The Computer On
Learning the Basics Using the optical drive Removing a disc with the computer on To remove a compact disc (CD or DVD) with the computer turned on: Press the eject button on the drive. Do not press the eject button while the in-use indicator light is glowing.
Page 101: Caring For Cd Or Dvd Discs
Let the disc dry completely before inserting it in the drive. Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions and keep you up to date with future upgrades.
Page 102: Chapter 3: Mobile Computing
Many of these energy-saving features have been set by Toshiba. We recommend you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while traveling.
Page 103: Battery Notice
Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage. Battery may not charge while the computer is consuming full power.
Page 104: Power Management
Users who are not completely familiar with the power management component of the system should use the preset configuration. For assistance with setup changes, contact Toshiba’s Global Support Centre. Using additional batteries In addition to the main battery, you may also have an optional second battery (not included with your computer).
Page 105: Charging Batteries
Never leave batteries in the battery charger for more than a week at a time. Doing so may reduce the potential charge of the battery. Always use the battery charger specified by Toshiba. You can order a Toshiba battery charger from Toshiba’s Web site at accessories.toshiba.com.
Page 106: Charging The Rtc Battery
Mobile Computing Charging batteries The battery may not start charging immediately under the following conditions: ❖ The battery is extremely hot or cold. To ensure that the battery charges to its full capacity, wait until it reaches room temperature (50 to 80 degrees Fahrenheit, 10 to 26 degrees Celsius).
Page 107: Monitoring Main Battery Power
If the RTC battery is low, the real-time clock and calendar may display the incorrect time and date, or stop working. To recharge the RTC battery, plug the computer into a live electrical outlet and leave the computer powered on for 24 hours.
Page 108 Mobile Computing Monitoring main battery power If the AC power light flashes amber during charging, either the NOTE battery pack is malfunctioning, or it is not receiving correct input from the AC power supply. Disconnect the AC power cord/cable and remove the battery pack.
Page 109: Determining Remaining Battery Power
Determining remaining battery power Wait at least 16 seconds after turning on the computer before NOTE trying to monitor the remaining battery power. The computer needs this time to check the battery’s remaining capacity and perform its calculations. Click Start, and then Control Panel. Double-click the Power Options icon.
Page 110: What To Do When The Main Battery Runs Low
Mobile Computing Monitoring main battery power TECHNICAL NOTE: The computer drains the battery faster at low temperatures. Check your remaining charge frequently if you are working in temperatures below 50 degrees Fahrenheit. The computer calculates the remaining battery charge based on your current rate of power use and other factors such as the age of the battery.
Page 111: Setting Battery Alarms
Setting battery alarms Your computer can be configured to warn you when the battery is running low. You can set multiple alarms. Each alarm can be set to alert you when a specified percentage of remaining battery power has been reached. You can set how the warning occurs: sound an alarm, display a message, both, or none.
Page 112: Conserving Battery Power
Mobile Computing Monitoring main battery power Conserving battery power How long a fully charged battery pack lasts when you are using the computer depends on a number of factors, such as: ❖ How the computer is configured ❖ How much you use the hard disk, optical drive, diskette drives, or other optional devices ❖...
Page 113: Using A Hot Key To Set The Power Scheme
Click the Power Schemes tab and select a power scheme. (Sample Image) Power Schemes tab in Power Options Properties You can configure your computer’s power usage using the drop down lists. You can choose one of the provided power schemes or select your own custom settings. For more information, see your Windows documentation.
Page 114: Changing The Main Battery
Mobile Computing Changing the main battery Changing the main battery When your main battery has run out of power, you have two options: plug in the AC adaptor or install a charged main battery. Never short circuit the battery pack by either accidentally or intentionally bringing the battery terminals in contact with another conductive object.
Page 115 Slide the battery release lock to the unlocked position. (Sample Illustration) Unlocking the battery release lock Slide the battery release latch to release the battery. Pull the discharged battery out of the computer. (Sample Illustration) Removing the battery Mobile Computing Changing the main battery...
Page 116: Inserting A Charged Battery
Mobile Computing Changing the main battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately. Always dispose of used battery packs in compliance with all applicable laws and regulations. Put insulating tape, such as cellophane tape, on the electrode during transportation to avoid a possible short circuit, fire or electric shock.
Page 117: Taking Care Of Your Battery
Slide the battery lock to the locked position. (Sample Illustration) Locking the battery release lock Turn the computer right side up. Reconnect any cables that were removed in step 3 of “Removing the battery from the computer” on page Restart the computer. Taking care of your battery The following sections offer tips on how to take care of your battery and prolong its life.
Page 118: Maintaining Your Battery
If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery. ❖ To replace the main battery, use an identical battery that you can purchase through the Toshiba Web site at accessories.toshiba.com. ❖ A reverse polarity condition should be avoided with all batteries.
Page 119: Disposing Of Used Batteries
Disconnect the AC adaptor and turn on the computer’s power. If it does not turn on, go to step 4. Operate the computer on battery power for five minutes. If the battery pack has at least five minutes of operating time, continue operating until the battery pack is fully discharged.
Page 120 If you cannot find the information you need elsewhere, call Toshiba at: (800) 457-7777. Toshiba is dedicated to preserving the environment by sponsoring Call2Recycle, a program of the Rechargeable Battery Recycling Corporation. For more information and for drop-off locations, visit 8837.
Page 121: Traveling Tips
❖ Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cords, and compact discs. Contact your authorized Toshiba representative for more information or visit Toshiba’s Web site at accessories.toshiba.com.
Page 122: Chapter 4: Exploring Your Computer's Features
Chapter 4 Exploring Your Computer’s Features In this chapter, you will explore some of the special features of your notebook computer. Exploring the desktop The desktop is the launching pad for everything you can do in the Windows programs, find documents, set up system components, and perform most other computing tasks.
Page 123: Finding Your Way Around The Desktop
Exploring Your Computer’s Features Exploring the desktop Finding your way around the desktop Your computer’s desktop includes several standard features: icons, Start button, Taskbar, System tray, and background pattern. Icons Start button Taskbar System tray ® (Sample Image) Windows operating system desktop Icons An icon represents a folder, file, or program that can be quickly activated by double-clicking the icon.
Page 124 Exploring Your Computer’s Features Exploring the desktop TECHNICAL NOTE: If you delete a file from a diskette or flash media, it does not go into the Recycle Bin. For more information on the Recycle Bin, see Windows online Help. Internet Explorer — The Microsoft access to the Internet.
Page 125: Setting Up For Communications
Taskbar Each time you open a program, a button associated with that program appears on the Taskbar. With some programs, a button appears on the Taskbar for each document or window you open. You can use these buttons to quickly switch between the programs or windows.
Page 126 Exploring Your Computer’s Features Setting up for communications Determining the COM port Your modem (available on certain models) is connected to one of the computer’s COM (communications) ports. The default setting for the modem is COM3. The following procedure is intended to support you if you need to either upgrade your modem or reset the port to the default settings.
Page 127: Connecting The Modem To A Telephone Line
Send a fax directly from your computer For more detailed information regarding your computer’s modem, visit Toshiba’s Web site at accessories.toshiba.com. Before you can communicate using the modem, you need to connect it to a telephone line. Your computer’s built-in modem port provides an RJ-11 jack, allowing you to connect the modem to a standard voice-grade telephone line.
Page 128 Exploring Your Computer’s Features Setting up for communications (Sample Illustration) Connecting the telephone cable to the modem port Connect the other end to the RJ-11 wall jack. (Sample Illustration) Connecting to a wall jack Connect the built-in modem only to ordinary analog phone NOTE lines.
Page 129: Connecting Your Computer To A Network
Connecting your computer to a network You can connect your computer to a network to increase its capabilities and functionality using one of its communication ports. Accessing a network To access a network: ❖ At the office, connect an Ethernet cable to the RJ45 jack on your computer.
Page 130 Exploring Your Computer’s Features Setting up for communications How to disable the Ethernet LAN port When your computer starts, Windows attempts to contact a Dynamic Host Configuration Protocol (DHCP) server. If the computer is not connected to a network, it may pause a few minutes as it waits for a reply.
Page 131: An Overview Of Using The Internet
Using Wireless LAN Connectivity Wireless connectivity and some features may require you to NOTE purchase additional software, external hardware or services. Availability of public wireless LAN access points may be limited. Your system may come with an optional wireless LAN module.
Page 132: The Internet
Exploring Your Computer’s Features An overview of using the Internet ❖ Internet features ❖ Uploading to, and downloading files from, the Internet The Internet The Internet is an association of thousands of networks and millions of computers around the world connected by communications lines.
Page 133: Connecting To The Internet
Connecting to the Internet To connect to the Internet, you need: ❖ A modem and telephone line, or a LAN connection ❖ A Web browser ❖ An Internet Service Provider (ISP) account The Microsoft automatically configured on your system so that when you first start it, it guides you through signing up for a new ISP account, or assists you in setting up your computer to work with your existing ISP.
Page 134: Surfing The Internet
Exploring Your Computer’s Features An overview of using the Internet Surfing the Internet Once connected to the Internet, the Web browser displays a home page, for example, your ISP’s home page on the Internet or your company’s Web site home page. To visit a desired Web site, type in the Web address.
Page 135: Uploading To, And Downloading Files From, The Internet
❖ Internet news groups A news group is similar to a chat room, but instead of using a dedicated site to converse about a specialized subject with others in real-time, it uses a Web site as a clearinghouse where all the messages are placed, like a gigantic bulletin board.
Page 136: Using External Speakers Or Headphones
Exploring Your Computer’s Features Exploring audio features Positioning (Sample Image) Sound Recorder screen Click the Record button. Speak normally into the microphone. When you have finished recording, click the Stop button. The Sound Recorder window displays the new sound file as a waveform.
Page 137 ❖ Optional headphone and S/PDIF jack (Available on certain models) This jack lets you connect either an optical digital audio- out cable (optional) directly to your digital stereo receiver port or a stereo headphone (16 Ohm minimum). The optional headphone and S/PDIF jack is used for both the NOTE headphone and S/PDIF functions.
Page 138: Using Pc Cards
Exploring Your Computer’s Features Using PC Cards Using any necessary adapters, plug the cable from the headphones or external speakers into the jack. The headphone jack requires a 16-ohm stereo mini-jack. To adjust the volume: ❖ For external speakers, use the volume controls on each speaker.
Page 139: Removing A Pc Card
To insert a PC Card: Locate the PC Card slot on the left side of the computer. Insert the PC Card. (Sample Illustration) Inserting a PC Card When the card is almost all the way into the slot, push firmly but gently to ensure a firm connection with the computer.
Page 140: Setting Up A Pc Card For Your Computer
Exploring Your Computer’s Features Using an ExpressCard™ Locate the PC Card eject button. Press the PC Card eject button once to pop it out slightly, and push it in to remove the PC Card. The PC Card ejects slightly from the slot. Grasp the edges of the PC Card and slide it out of the slot.
Page 141: Inserting An Expresscard
Inserting an ExpressCard Before you insert an ExpressCard documentation that comes with the card to see if you need to do anything before you insert it. You can only use PC Cards in the top slot or ExpressCards in the bottom slot. You cannot insert a PC Card into the ExpressCard slot (the bottom slot), nor can you insert an ExpressCard into the PC Card slot (the top slot).
Page 142: Removing An Expresscard
Exploring Your Computer’s Features Using the Bridge Media Adapter Slot Removing an ExpressCard Prepare the card for removal by right-clicking the Safely Remove Hardware icon on the system tray and then selecting the card or device you want to remove. If the system is unable to prepare the card for safe removal, a message will tell you to try again later.
Page 143: Inserting Memory Media
The Bridge Media Adapter slot may also support other types of media. For a complete list of supported media, visit Toshiba’s Web site at accessories.toshiba.com. Do not use the Copy Disk function for this type of media. To NOTE copy data from one media to another, use the drag-and-drop feature of Windows.
Page 144: Removing Memory Media
Exploring Your Computer’s Features Using the Bridge Media Adapter Slot Removing memory media Prepare the media for removal by right-clicking the Safely Remove Hardware icon on the system tray and then selecting the card or device you want to remove. If the system is unable to prepare the media for safe removal, a message will tell you to try again later.
Page 145: Using The I.link® Port
Exploring Your Computer’s Features Using the i.LINK® port ® Using the i.LINK port (Available on certain models) ® The i.LINK port (available on certain models) on the left side of the computer provides an extremely fast data transfer rate. ® In addition to high speed, the i.LINK port also supports isochronous data transfer (the delivery of data at a guaranteed...
Page 146: Chapter 5: Toshiba Utilities
❖ User password ❖ Toshiba Password Utility ❖ PC Diagnostic Tool Utility ❖ TOSHIBA Hotkey Utility ❖ TOSHIBA SD™ Memory Card Format Utility ❖ Mouse Utility ❖ Toshiba Hardware Setup ❖ TOSHIBA Zooming Utility ❖ CD/DVD Drive Acoustic Silencer ❖...
Page 147: Toshiba Assist
TOSHIBA Assist The TOSHIBA Assist provides quick access to computer functions and allows you to customize a range of computer settings. To access TOSHIBA Assist, do one of the following: ❖ Double-click the TOSHIBA Assist shortcut icon on the desktop.
Page 148: Connect
Toshiba Utilities TOSHIBA Assist Connect The features available in this category are: ❖ ConfigFree™ ❖ ConfigFree ❖ Bluetooth ❖ Bluetooth Local COM Settings (Sample Image) TOSHIBA Assist window – Connect tab Connectivity Doctor Settings ®...
Page 149: Secure
Secure The features available in this category are: ❖ User password ❖ Supervisor password ❖ Toshiba Password Utility (Sample Image) TOSHIBA Assist window – Secure tab Toshiba Utilities TOSHIBA Assist...
Page 150: Protect & Fix
Toshiba Utilities TOSHIBA Assist Protect & Fix The feature available in this category is: ❖ PC Diagnostic Tool Utility (Sample Image) TOSHIBA Assist window – Protect & Fix tab...
Page 151: Optimize
TOSHIBA SD™ Memory Card Format Utility ❖ Mouse Utility ❖ Toshiba Hardware Setup ❖ TOSHIBA Zooming Utility ❖ CD/DVD Drive Acoustic Silencer ❖ TOSHIBA Accessibility ❖ Fingerprint Authentication Utility (Sample Image) TOSHIBA Assist window – Optimize tab Toshiba Utilities TOSHIBA Assist...
Page 152: Setting Passwords
When you set a password, you must enter the password before you can work on your computer again. Toshiba supports several types of passwords on your computer: ❖ An instant password — Secures your open programs and files when leaving the computer temporarily.
Page 153: Setting A User Password
Setting a user password To register a password for the power-on password functions: Click Start, All Programs, Toshiba, Utilities, and then TOSHIBA Assist. The TOSHIBA Assist window appears. On the left side, select Secure.
Page 154: Using A Supervisor Or User Password
A supervisor password prevents other users from changing hardware configuration options. Setting a supervisor password If you choose to set a supervisor or user password, Toshiba strongly recommends that you save your password in a location where you can later access it should you not remember it.
Page 155: Deleting A Supervisor Password
Click Delete. Follow the on-screen instructions to remove the supervisor password. Toshiba Password Utility The Toshiba Password Utility allows you to set a user-level password in TOSHIBA Assist or in System Setup. To use the Toshiba Password utility: Start TOSHIBA Click the Secure tab, then click the User Password icon.
Page 156 Click OK to exit. If you choose to set a supervisor or user password, Toshiba strongly recommends that you save your password in a location where you can later access it should you not remember it.
Page 157: Pc Diagnostic Tool Utility
Refer to the online Help documentation within the application for additional help. To use the PC Diagnostic Tool utility: Click Start, All Programs, Toshiba, Utilities, and then PC Diagnostic Tool, or click the PC Diagnostic Tool icon in the Protect & Fix tab of The PC Diagnostic Tool window appears.
Page 158: Toshiba Hotkey Utility
Toshiba Utilities TOSHIBA Hotkey Utility TOSHIBA Hotkey Utility The TOSHIBA Hotkey utility allows you to receive a confirmation message when you use the Hotkey combination for Standby [ To activate the Hotkey utility: Click Start, All Programs, Toshiba, Utilities, and then Hotkey utility.
Page 159: Toshiba Sd™ Memory Card Format Utility
This utility is used to format SD Media Adapter slot. To format an SD memory card using this utility: Click Start, All Programs, Toshiba, Utilities, and then SD Memory Card Format, or click the SD Memory Card icon in the Optimize tab of The SD Memory Card Format screen appears.
Page 160: Mouse Utility
Toshiba Utilities Mouse Utility Mouse Utility The Mouse utility allows you to change your pointing device or mouse settings. To access the Mouse utility: Click Start, Control Panel, and then Mouse, or click the Mouse icon in the Optimize tab of The Mouse Properties screen appears.
Page 161: Toshiba Hardware Setup
Windows system. To access it: ❖ Click Start, All Programs, Toshiba, Utilities, Assist, or click the Toshiba Hardware Setup icon in the Optimize tab of TOSHIBA The Toshiba Hardware Setup screen appears. (Sample Image) Toshiba Hardware Setup screen – Password...
Page 162 Toshiba Utilities Toshiba Hardware Setup ❖ Password—Allows you to set or reset the user password for power-on process and for instant security ❖ Display—Allows you to change various default settings for the built-in LCD display When the computer restarts, it remembers the last NOTE configuration.
Page 163: Toshiba Zooming Utility
® Adobe ❖ Icons on the desktop To access the Zooming utility: Click Start, All Programs, Toshiba, Utilities, and then Zooming Utility, or click the Zooming Utility icon in the Optimize tab of The TOSHIBA Zooming Utility Properties screen appears.
Page 164: Cd/Dvd Drive Acoustic Silencer
The zoom in and zoom out hot keys will now work with the applications you selected. To zoom in, hold down the hold down the For more information about how to use the TOSHIBA Zooming utility, right click the then click Help. CD/DVD Drive Acoustic Silencer This utility can slow the speed of your optical drive to make it run more quietly.
Page 165: Toshiba Accessibility
Click Set Normal Mode to run the drive at normal speed for transferring data. TOSHIBA Accessibility The TOSHIBA Accessibility utility allows you to use the key to create a hot key combination with one of the function keys without pressing the two keys simultaneously as is usually required.
Page 166: Fingerprint Authentication Utility
Toshiba does not guarantee that the fingerprint utility will accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of the fingerprint software or utility.
Page 167: Fingerprint Enrollment
If your system supports power-on security, a Power-on button is also displayed above each enrolled fingerprint. This button is shown pressed by default, indicating that your fingerprint is automatically added for power-on authentication. Toshiba Utilities Fingerprint Authentication Utility...
Page 168: Fingerprint Logon
Toshiba Utilities Fingerprint Authentication Utility During fingerprint enrollment, the system displays icons as prompts, notifications, and warnings. These icons and their meanings are as follows: ❖ Reader ready—the reader is waiting to read your fingerprint. Swipe your finger when you are ready.
Page 169: Power-On Security
Open the Control Center and go to Settings - Power-on Security. (This wizard is displayed only if your system supports power-on security.) Check the option Replace the power-on and hard drive passwords with the fingerprint reader. Toshiba Utilities Fingerprint Authentication Utility...
Page 170: Control Center
Toshiba Utilities Fingerprint Authentication Utility Power-on security can be configured to operate with the fingerprint logon feature. If a fingerprint used for power-on security matches a fingerprint in an existing passport, the corresponding user is logged on automatically without having...
Page 171 ❖ Fingerprint Storage Inspector—Opens the Fingerprint Storage Inspector dialog where you can see the contents of your fingerprint storage. Toshiba Utilities...
Page 172: Password Bank
Toshiba Utilities Fingerprint Authentication Utility Help ❖ Introduction—Displays the Introduction dialog with basic information about product features. ❖ Tutorial—Runs the fingerprint tutorial which shows you how to enroll your fingerprints. This tutorial is highly recommended for first-time users of this technology. The quality of enrolled fingerprints is extremely important for your satisfaction with the product.
Page 173 Settings dialog. A wizard will assist you through your first registration. Replaying a registered Web page or dialog You are logged on to the computer and want to replay a registered Web page. Toshiba Utilities...
Page 174 Toshiba Utilities Fingerprint Authentication Utility To replay a registration: Swipe your enrolled finger to display the Biomenu. Select Registered Sites. Select a page you want to display and replay, or simply verify your fingerprint if the page is already displayed.
Page 175 You are logged on to the computer and want to delete an existing registration. To delete an existing registration: Click the Settings topic in the Control Center. Click User Settings. Verify your fingerprint. Select Registrations. Select a registration. Click Delete. Toshiba Utilities...
Page 176: Care And Maintenance Of Your Fingerprint Reader
Toshiba Utilities Fingerprint Authentication Utility How to Delete the Fingerprint Data Fingerprint data is stored in the non-volatile memory. If the computer changes ownership, Toshiba recommends the following procedure: Click Start, All Programs, Protector Suite QL, and then Control Center.
Page 177 Also if the fingerprint is worn down or the finger becomes thinner or fatter, the recognition success rate may be lowered. Toshiba Utilities...
Page 178: Fingerprint Reader Limitations
Toshiba does not guarantee that the fingerprint reader will recognize the enrolled user or accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of this fingerprint recognition software or utility.
Page 179: Chapter 6: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter. Problems that are easy to fix Your program stops responding.
Page 180 If Something Goes Wrong Problems that are easy to fix To close a program that has stopped responding: Press Ctrl The Windows Task Manager window appears. Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task.
Page 181: Problems When You Turn On The Computer
Your program performs an illegal operation. If you receive the message, “ close the window and continue working. If it operation ” happens again, record the details of the message and consult the software manufacturer. To record the details: Click the Details button and select the text the operating system displays.
Page 182 If Something Goes Wrong Problems when you turn on the computer If you are using an AC adaptor, verify that the computer is receiving power from the external power source by looking at the AC power light. If the indicator is glowing, the computer is connected to a live external power source.
Page 183: The Windows Operating System Is Not Working
The Windows® operating system is not working Always save your data even when you are using Standby. If your battery fully discharges, information that has not been saved will be lost. Your computer can be configured to warn you when the battery is running low see the main battery runs low”...
Page 184: Using Startup Options To Fix Problems
If Something Goes Wrong The Windows® operating system is not working Unless a hardware device has failed, problems usually occur when you change the system in some way such as installing a new program or adding a device. If you experience any of these problems, use the options in the Startup menu to fix the problem.
Page 185: Internet Problems
The Windows® operating system is not working See your Windows If your computer is connected to a network, the Startup menu NOTE may display different versions of Safe mode. Internet problems My Internet connection is very slow. Many factors contribute to the speed with which you can surf the Internet.
Page 186: Resolving A Hardware Conflict
Click a problem you would like help with from the listings and follow the on-screen instructions. You can connect to Support Online by clicking Support from the menu or by going to pcsupport.toshiba.com. Resolving a hardware conflict If you receive an error message telling you there is a device driver conflict or a general hardware problem, try using ®...
Page 187: Resolving Hardware Conflicts On Your Own
If Something Goes Wrong Resolving a hardware conflict The device most recently connected to the system is the one most likely to be causing a hardware conflict. Resolving hardware conflicts on your own Computer components need resources to accomplish a task. A device, such as a disk drive or a modem, needs a channel to the computer’s Central Processing Unit (CPU).
Page 188 If Something Goes Wrong Resolving a hardware conflict Plug and Play With Plug and Play and the operating system, avoiding hardware conflicts is easy. Plug and Play is a computer standard that helps the system BIOS (basic input/output system) and the operating system to automatically assign system resources to Plug and Play-compliant devices.
Page 189: Fixing A Problem With Device Manager
Fixing a problem with Device Manager Device Manager provides a way to check and change the configuration of a device. Changing the default settings using Device Manager can cause other conflicts that make one or more devices unusable. Device Manager is a configuration tool for advanced users who understand configuration parameters and the ramifications of changing them.
Page 190 If Something Goes Wrong Resolving a hardware conflict To check a device’s properties: Click Start, Control Panel, then click Performance and Maintenance. Click the Administrative Tools icon. Double-click Computer Management, then click Device Manager. To view the device(s) installed, double-click the device type.
Page 191: Memory Problems
Memory problems Incorrectly connected or faulty memory modules may cause errors that seem to be device-related. It is worthwhile checking for these first: Click Start, Turn off computer. Click Turn Off. The operating system shuts down and turns off the computer automatically.
Page 192 If Something Goes Wrong Resolving a hardware conflict Here are some typical problems and how to solve them: The AC power light does not come on when you plug in the AC adaptor and power cord/cable. Make sure the AC adaptor and power cord/cable are firmly plugged into both the wall outlet and the computer.
Page 193: Keyboard Problems
This is normal for all batteries. To purchase a new battery pack, see your accessories information that shipped with your computer, or visit the Toshiba Web site at accessories.toshiba.com. Refer to this site often to stay current on the most recent software and hardware options for your computer, and for other product information.
Page 194: Display Problems
If Something Goes Wrong Resolving a hardware conflict You have connected an external keyboard and the operating system displays one or more keyboard error messages. The keyboard you connected may be defective or incompatible with the computer. Try using a different make of keyboard.
Page 195 If you are using an external monitor: ❖ Check that the monitor is turned on. ❖ Check that the monitor’s power cord/cable is firmly plugged into a working power outlet. ❖ Check that the cable connecting the external monitor to the computer is firmly attached.
Page 196 If Something Goes Wrong Resolving a hardware conflict A message displays saying that there is a problem with your display settings and that the adapter type is incorrect or the current settings do not work with your hardware. Reduce the size of the color palette to one that is supported by the computer’s internal display.
Page 197: Disk Drive Problems
Disk drive problems Problems with the hard disk or with a diskette drive usually show up as an inability to access the disk or as sector errors. Sometimes a disk problem may cause one or more files to appear to have garbage in them. Typical disk problems are: You are having trouble accessing a disk, or one or more files appear to be missing.
Page 198 If Something Goes Wrong Resolving a hardware conflict Click Start. Error-checking tests and repairs the disk. Your hard disk seems very slow. If you have been using your computer for a long time, your files may have become fragmented. Run Disk Defragmenter. To do this, click Start, All Programs, Accessories, System Tools, and then Disk Defragmenter.
Page 199: Optical Drive Problems
The computer displays the message. If you are starting the computer from a diskette, the diskette in the drive does not have the files necessary to start the computer. Replace it with a bootable diskette. The drive cannot read a diskette. Try another diskette.
Page 200: Sound System Problems
If Something Goes Wrong Resolving a hardware conflict If you need to remove a disc and cannot turn on the computer (for example, if the battery is completely discharged), use a narrow object, such as a straightened paper clip, to press the manual eject button.
Page 201: Pc Card Problems
If Something Goes Wrong Resolving a hardware conflict The computer emits a loud, high-pitched noise. This is feedback between the microphone and the speakers. It occurs in any sound system when input from a microphone is fed to the speakers and the speaker volume is too loud. Adjust the volume control.
Page 202 If Something Goes Wrong Resolving a hardware conflict If your system does not have built-in drivers for your PC Card and the card did not come with an operating system driver, it may not work under the operating system. Contact the manufacturer of the PC Card for information about using the card under the operating system.
Page 203 The computer stops working (hangs) when you insert a PC Card. The problem may be caused by an I/O (input/output) conflict between the PCMCIA socket and another device in the system. Use Device Manager to make sure each device has its own I/O base address.
Page 204: Printer Problems
If Something Goes Wrong Resolving a hardware conflict A PC Card error occurs. Reinsert the card to make sure it is properly connected. If the card is attached to an external device, check that the connection is secure. Refer to the card’s documentation, which should contain a troubleshooting section.
Page 205: Modem Problems
The other system may be busy or off line. Try making a test transmission to someone else. For more information regarding your system's V.92 modem, visit the Toshiba Web site at pcsupport.toshiba.com. If Something Goes Wrong Resolving a hardware conflict...
Page 206: Wireless Networking Problems
To determine if your computer has an internal Wi-Fi adapter, NOTE check the device list in Device Manager (part of the Windows Control Panel). Some Toshiba models may have a Wi-Fi antenna switch even though they do not have an internal Wi-Fi adapter.
Page 207 ❖ Check the Control Panel’s Device Manager to verify that the Wi-Fi adapter is recognized by Windows the driver is loaded. Carefully note any error messages— these will be very helpful if you should confer with a support technician at a later time. ❖...
Page 208 If Something Goes Wrong Resolving a hardware conflict ❖ Use the PING command to verify a connection to the gateway at 192.168.1.1 (a default gateway for most wireless routers). ❖ Click Start, then click Run... ❖ Enter Cmd and press Enter. ❖...
Page 209: Dvd Operating Problems
Select Allow me to connect to the selected wireless network, even though it is not secure. Windows XP will now try to establish a wireless connection. The Windows XP wireless management facility does not work. If you are using an external Wi-Fi adapter (a PC Card, USB adapter, or other variety), check if the adapter comes with its own management utility.
Page 210 “Checking device properties” on page 189 instructions on using Device Manager to view the optical drive properties. Check the Toshiba Web site for new information on optical drives and their operation. A blank screen appears while watching a DVD-ROM movie or title.
Page 211 Next to the words Desktop Area, move the slider to a lower setting, such as 800 x 600 or 640 x 480. Click OK. DVD titles, games, or applications appear distorted. Having Stretch enabled when your video resolution is set to 640 x 480 or 800 x 600 can cause distortion.
Page 212: Develop Good Computing Habits
If Something Goes Wrong Develop good computing habits Click None. Click OK. Develop good computing habits Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature.
Page 213: Data And System Configuration Backup In Windows Xp
If Something Goes Wrong Develop good computing habits Read the user’s guides. It is very difficult to provide a fail-safe set of steps you can follow every time you experience a problem with the computer. Your ability to solve problems will improve as you learn about how the computer and its software work together.
Page 214 If Something Goes Wrong Develop good computing habits Under Pick a Task, click Undo changes to your computer with System Restore. Click Create a restore point, and then click Next. In the Restore point description field, enter a name that is descriptive enough to be easily understood in the future, such as “Before installing Brand X Accounting app.”...
Page 215 CDs, a relatively high-capacity storage media. No additional software is required. Most of the CD and DVD drives built into recent Toshiba portable computer models can write to (or ‘burn’) as well as read from CDs.
Page 216 If Something Goes Wrong Develop good computing habits NOTE Documents and other data files that you create as you work are typically stored in the My Documents folder. You may also wish to back up other important data files stored elsewhere on your hard disk drive, for example: ❖...
Page 217 Favorites (bookmarks) for Internet Explorer Follow these steps to back up your Favorites for Internet Explorer (ver 5.0 or newer): In Internet Explorer, click File, Import and Export. The Import/Export Wizard will appear. Click Next. Click Export Favorites, Next. (To restore the Favorites to the hard disk drive later you would select Import Favorites from this list.) A list of your Favorites folders will appear, with the top-...
Page 218 If Something Goes Wrong Develop good computing habits General tips for installing hardware and software Here are a few tips to help ensure safe and easy installation of new hardware (printers, pointing devices, external hard drives, DVD writers, scanners, etc.) and software (applications like Microsoft Office and Adobe such as special toolbars for your web browser).
Page 219: If You Need Further Assistance
Since some problems may be related to the operating system or the program you are using, it is important to investigate other sources of assistance first. Try the following before you contact Toshiba: ❖ Review the troubleshooting information in your operating system documentation.
Page 220: Contacting Toshiba
Go to the Tech Support Center, select your particular model from the list and go to the Detailed Specifications for that model. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. Contacting Toshiba If you still need help and suspect that the problem is hardware- related, Toshiba offers a variety of resources to help you.
Page 221: Other Toshiba Internet Web Sites
Information about what you were doing when the problem occurred ❖ Exact error messages and when they occurred For technical support, call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Other Toshiba Internet Web sites toshiba.com...
Page 222 Henares Spain United States Toshiba America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618 United States For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm. Japan Toshiba Corporation, PCO-IO 1-1, Shibaura 1-Chome Minato-Ku, Tokyo, 105-8001 Japan Mexico Toshiba de México S.A.
Page 223: Appendix A: Hot Keys
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on the key indicating the option or feature the key controls. Volume Mute This hot key enables/disables volume mute on your computer.
Page 224: Password Security
Hot Keys Password security Password security This hot key blanks the display. Without a password activates instant security. Using the pointing device or any key will make the display’s content reappear, if no password is set for the current user. With a password activates instant security.
Page 225: Maintaining Security When The Battery Is Not Fully Charged
Click the On resume, password protected check box. Click OK. Maintaining security when the battery is not fully charged When the battery is not fully charged (even if the computer is operating on AC power) your display may reappear automatically after a short time. To protect your desktop, you must set up a screen saver with a password before activating the password feature.
Page 226: Power Usage
Hot Keys Power usage Power usage This hot key displays the Power Schemes tab of the Power Options Properties window. (Sample Image) Power Schemes tab in Power Options You can configure your computer’s power usage using the drop down lists. You can choose one of the provided power schemes or select your own custom settings.
Page 227: Standby Mode
Hot Keys Standby mode Standby mode This hot key places the computer into Standby mode. A message box displays by default to confirm that the computer is entering Standby mode. You can choose not to display this message box. (Sample Image) Sample Standby confirmation box For more information about Standby mode, please “Using and configuring Standby mode”...
Page 228: Hibernation Mode
Hot Keys Hibernation mode Hibernation mode This hot key places the computer into Hibernation mode. If Hibernation mode is enabled (the default) a message box displays by default to confirm the computer is entering Hibernation mode. You can choose not to display this message box. (Sample Image) Hibernation confirmation box If Hibernation mode is disabled, this hot key will not respond.
Page 229: Display Modes
Display modes This hot key cycles through the power-on display options. The display modes are: ❖ ❖ ❖ ❖ ❖ ❖ (Sample Image) Display options window To use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device.
Page 230: Display Brightness
Hot Keys Display brightness Display brightness This hot key decreases the screen brightness. This hot key increases the screen brightness. Disabling or enabling wireless devices This hot key enables/disables the optional wireless devices installed in your computer. The wireless modes are: ❖...
Page 231: Disabling Or Enabling The Touchpad Or Dual Mode Pad
Utility” on page This hot key turns the Zooming utility to zoom-in. For more information, see Utility” on page Keyboard hot keys This hot key switches screen resolution. [Space bar] Hot Keys 61. For more “TOSHIBA Zooming 163. “TOSHIBA Zooming 163.
Page 232: Appendix B: Power Cord/Cable Connectors
Appendix B Power Cord/Cable Connectors Your notebook computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved...
Page 233: Computer
Appendix C Using ConfigFree your Toshiba Computer ™ ConfigFree communication devices and network connections. ConfigFree also lets you identify communication problems and create profiles for easy switching between locations and communication networks. For more information on using ConfigFree, see the ConfigFree NOTE online Help.
Page 234: Getting Started
Click Start, All Programs, Toshiba, Networking, and then ConfigFree. ❖ Double-click the ConfigFree icon ❖ Press the Toshiba Assist button (if applicable to your system) to open the Toshiba Assist, and then click the ConfigFree icon. ❖ Click the ConfigFree icon click the desired utility. 244.
Page 235: Configfree Utilities
Using ConfigFree™ with your Toshiba Computer If your computer is not connected to a network, the ConfigFree NOTE icon on the Taskbar is displayed with an “X.” When you start a search for wireless devices, ConfigFree Launcher displays on your computer desktop. You can then click the appropriate icon on the Launcher to start the desired ConfigFree utilities.
Page 236: Configfree Utilities
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities (Sample Image) ConfigFree Launcher coming back into view ConfigFree Utilities Connectivity Doctor The Connectivity Doctor lets you analyze your network connections and fix network connection problems. Using Connectivity Doctor, you can view detailed network information by simply moving the mouse pointer.
Page 237 Using ConfigFree™ with your Toshiba Computer ❖ Location of wireless communication switch (identified with a yellow arrow) ❖ Status of wireless communication switch (on or off) (Sample Image) Connectivity Doctor screen Moving the mouse pointer over a wired or wireless network device icon displays information about the device, such as its IP address, subnet mask, and MAC address.
Page 238 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities If a problem or potential problem is detected, in most cases, a screen automatically displays showing you the possible cause and solution for the problem. A triangle containing an exclamation point also appears on the Connectivity Doctor screen, and an orange frame describes the relevant location.
Page 239: Search For Wireless Devices
Using ConfigFree™ with your Toshiba Computer Search for Wireless Devices The Search for Wireless Devices utility searches for wireless LAN and Bluetooth neighborhood, and displays information about them on a virtual map. To search for wireless devices: Click the Click Search for Wireless Devices.
Page 240 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities (Sample Image) Viewing Wi-Fi devices Creating a new wireless connection This feature is only supported on systems running Windows NOTE XP SP2. To add a new wireless connection to an Access Point: Open the Search for Wireless Devices option from ConfigFree Launcher.
Page 241 Using ConfigFree™ with your Toshiba Computer (Sample Image) Dragging a device to the Access Point (Sample Image) Wireless settings screen Enter the SSID/WEP information and connect to the device. After the Access Point is set up and added to the connection...
Page 242 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Creating a detected device wireless connection The following screen shows an example of Bluetooth devices that are detected using the Search for Wireless Devices option. Moving the mouse cursor over a device icon displays information about the device.
Page 243 Using ConfigFree™ with your Toshiba Computer (Sample Image) Dragging the file to the Bluetooth icon To be prompted for the device: Drag and drop the file to the Bluetooth ConfigFree Launcher. (Sample Image) Dragging the file to the Bluetooth icon Or, you can right-click the file and select Send to Bluetooth Devices.
Page 244: Profile Settings
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities (Sample Image) Selecting Send to Bluetooth Choose a file recipient. Click Send. During a file transfer, connecting and disconnecting to the NOTE selected device will occur automatically. Disconnecting from a Bluetooth To disconnect from a Bluetooth Place the cursor on top of the connected line.
Page 245 Using ConfigFree™ with your Toshiba Computer A profile contains the currently configured network settings on the computer, as well as information about any network devices. The following settings can be saved (or “captured”) in a profile: ❖ Internet settings—includes LAN settings (proxy server settings) and the address of a home page that opens automatically when Internet Explorer starts.
Page 246 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Under Captured Items, select the items you want to capture for this profile. If connecting with a wireless network, select the desired Auto Switch Settings. (These options are unavailable if wireless devices have been disabled.)
Page 247 Using ConfigFree™ with your Toshiba Computer (Sample Image) Expanded Add Profile screen The online Help provides real-world examples of setting up NOTE profiles for different networking environments. After you set up one or more profiles, you can check their settings and fine-tune them as necessary. Profiles can also be imported and exported.
Page 248: Configfree Summit
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities ConfigFree SUMMIT The ConfigFree SUMMIT utility is a convenient way to share files with other users and to transfer files between your computers at home and at work. This utility is faster and more dependable than sending the files via email.
Page 249 Using ConfigFree™ with your Toshiba Computer (Sample Image) Users attending SUMMIT meeting (user icons appear on SUMMIT table) Files can be shared with one user or all users attending the meeting. ❖ To share a file with one user, drag and drop the file on the user’s icon.
Page 250 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities ❖ To share a file with all users, drag the file to the center of the SUMMIT table where users can access it as desired. If you are the Host of the summit, and drag a file to the center...
Page 251 Using ConfigFree™ with your Toshiba Computer Click SUMMIT. Other users appear on the SUMMIT main window. SUMMIT can also be started from the ConfigFree Launcher. NOTE Select the appropriate users and invite them to the SUMMIT meeting. As users join the SUMMIT, their icons appear on the SUMMIT table.
Page 252: Quick Connect
Projector (DPJ), then click Connect. Launching Quick Connect prevents you from using the network to connect to a Toshiba Wireless Projector when the wireless LAN Configuration is set to Ad Hoc. If you are connected to an access point, the connection is broken and re- established later.
Page 253 Because the wireless LAN’ s default connection setting is for NOTE Ad Hoc mode, the Toshiba Wireless Projector will not connect if the projector is set to Infrastructure mode. If this occurs, you can change the wireless LAN’ s connection setting to Infrastructure mode to match the settings on the projector.
Page 254 If you close ConfigFree. Direct Link Toshiba Device When Access Point is not available, use the Direct Link Toshiba Device feature to connect your computer in Ad Hoc (peer-to-peer) mode and use the Summit feature. To use this feature: Display the ConfigFree menu.
Page 255: Using The Automatic Switch
Using ConfigFree™ with your Toshiba Computer Using the Automatic Switch The Automatic Switch feature allows the computer to automatically switch profiles the next time it is powered on. This feature is particularly useful if you want your computer to automatically switch from the network configuration you use in your office to the one you use at home.
Page 256 Using ConfigFree™ with your Toshiba Computer Semi-Automatic Switch Feature Click Auto Switch. The Auto Switch dialog box appears. Select the Auto Switch (SSID) tab. Select the profile to be automatically selected when the SSID is detected, then click Add. The profile is moved to the List of target SSIDs and profiles.
Page 257: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this user’s guide. BIOS CD-ROM CD-RW CMOS COM1 COM2 alternating current basic input/output system bits per second compact disc compact disc read-only memory compact disc rewrite memory...
Page 258 Glossary DIMM DSTN DVD-ROM digital versatile (or video) disc read-only memory EPROM HTML IEEE LPT1 MIDI PCMCIA direct memory access dual inline memory module disk operating system dots per inch dual supertwist nematic digital versatile (or video) disc enhanced capabilities port erasable programmable read-only memory file allocation table Federal Communications Commission...
Page 259 SCSI SDRAM SRAM SVGA Terms The following terms may appear in this user’s guide. active-matrix display — A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 260 Glossary application — A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems. See also program. backup — A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged.
Page 261 cache — A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory. See also CPU cache, L1 cache, L2 cache. CD —...
Page 262 Glossary CPU — See central processing unit (CPU). CPU cache — A section of very fast memory residing between the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs. See also cache, L1 cache, L2 cache.
Page 263 disk drive — The device that reads and writes information and programs on a diskette or hard disk. It rotates the disk at high speed past one or more read/write heads. diskette — A thin, flexible disk in a protective jacket that stores magnetically encoded data.
Page 264 Glossary executable file — A computer program that is ready to run. Application programs and batch files are examples of executable files. Names of executable files usually end with a .bat or .exe extension. expansion device — A device that connects to a computer to expand its capabilities.
Page 265 — The physical components of a computer system. Compare software. Hibernation — A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 266 Glossary Internet — The decentralized, world-wide network of computers that provides electronic mail, the World Wide Web, and other services. See also World Wide Web. keyboard shortcut — A key or combination of keys that you use to perform a task instead of using a pointing device such as a mouse. L1 (level one) cache —...
Page 267 MIDI (Musical Instrument Digital Interface) — A standard for connecting musical instruments, synthesizers, and computers. The MIDI standard provides a way of translating music into a form computers can use, and vice versa. modem — Short for “modulator/demodulator.” A device that converts information from digital to analog, and back to digital, enabling information to pass back and forth between digital computers and analog telephone lines.
Page 268 Glossary optical drive — A drive which reads plastic coated discs on which information is recorded digitally and uses a laser to read data, music, or videos. palette — See color palette. parallel — Processes that occur simultaneously. In communications, it means the transmission of more than one bit of information at a time.
Page 269 properties — The attributes of an object or device. For example, the properties of a file include the file’s type, size, and creation date. RAM (random access memory) — Volatile memory that can be written to as well as read. Volatile here means that information in RAM is lost when you turn off your computer.
Page 270 “greater than” sign) indicating where users are to enter commands. Toshiba tablet pen — The writing instrument used with the tablet. It is stored on the right side of the computer. TFT display — See active-matrix display.
Page 271 Wi-Fi — A registered trademark term of the Wi-Fi Alliance that stands for Wireless Fidelity, and is another term for the communication protocol to permit an Ethernet connection using wireless communication components. World Wide Web (www) — The worldwide network of Web sites linked together over the Internet.
Page 272: Index
48 not charging 192 power profile 226 power scheme hot key 113 real-time clock (RTC) 104 removing 114 BIOS Setup see Toshiba Hardware Setup Bridge Media Adapter inserting memory media 143 removing memory media 144 button power 51 start 124...
Page 273 charging the battery 49 checking device properties 189 click 62 communications network connection 129 set up 125 system resources 187 compact disc positioning 96 compact discs handling 97 inserting 95 removing 100 compact disk drive using 93 computer caring for 80 cleaning 80 moving 80 non-system disk or disk error...
Page 274 Index problem with display settings/ current settings not working with hardware 196 program has performed an illegal operation 181 warning resume failure 182 Error-checking 197 Ethernet LAN port 130 expansion memory slot 54 exploring the desktop 122 ExpressCard inserting 141 removing 142 external monitor...
Page 275 uploading and downloading files URL address not found 185 using 131 Internet Explorer icon 124 Internet Service Providers 132 IRQ (Interrupt Request) 187 ISPs 132 jack RJ-11 128 keyboard character keys 84 function keys 85 hot keys 231 not working 182 troubleshooting 193 using 84 Windows special keys 85...
Page 276 199 changing display properties 196 checking device properties 189 computer hangs when PC Card computer will not power up 181 contacting Toshiba 219 corrupted/damaged data files 198 Device Manager 189 disabling a device 189 disk drive is slow 198...
Page 277 184 supervisor password, deleting 155 supervisor password, set up 154 system tray 125 Taskbar 125 telephone line connecting to modem 127 television adjusting display 69 Toshiba registering computer 45 worldwide offices 221 TOSHIBA Assist 147 Toshiba Hardware Setup 161...
Page 278 Index Toshiba online resources 101 Toshiba utilities 146 traveling tips 121 troubleshooting DVD player general problems 209 external keyboard 194 keyboard 193 keypad overlay 193 optical drive 199 turning on the computer 51 turning on the power 51 user password, disabling 153...

Toshiba P105-S9337 User Manual

Chapter 1: Getting Started

Chapter 2: Learning the Basics

Chapter 3: Mobile Computing

Chapter 4: Exploring Your Computer's Features

Chapter 5: Toshiba Utilities

Chapter 6: If Something Goes Wrong

Appendix A: Hot Keys

Appendix B: Power Cord/Cable Connectors

Appendix C: Using Configfree™ with Your Toshiba

Quick Links

Related Manuals for Toshiba P105-S9337

Summary of Contents for Toshiba P105-S9337