Replacement Procedures
Installing an optical disk drive
The following describes the procedure for installing an optical disk drive (See Figure 4-11
and 4-12).
1. Attach the ODD bracket to an optical disk drive and secure it with the following
screws.
• M2.0×3.0 Flat BIND screw
2. Insert an optical disk drive assembly into the slot and connect it to the connector
CN26 on the system board.
3. Secure the ODD drive with the following screw.
M2.5X6.0
Satellite P100 Maintenance Manual (960-Q02)
M2.0×3.0
Figure 4-12 Disassembling the side bracket
Flat BIND screw X1
ODD bracket
x2
4-27