Procedure 1 Diagnostic Test Program Execution Check; Procedure; Fingerprint Troubleshooting - Toshiba Satellite P100 Series Maintenance Manual
Pc
Hide thumbs
Also See for Satellite P100 Series:
- Maintenance manual (311 pages) ,
- User manual (196 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Troubleshooting Procedures
2.16 Fingerprint Troubleshooting
To check if the computer's Fingerprint is malfunctioning or not, follow the troubleshooting
procedures below as instructed.
Procedure 1: Connector Check and Replacement Check
Procedure 1
Diagnostic Test Program Execution Check
Execute Fingerprint test in the test program. Refer to Chapter 3,
more information on how to perform the test program.
If any error is detected, perform Procedure 2.
Procedure 2
Connector Check and Replacement Check
The Fingerprint function is embedded on system board. If Fingerprint malfunctions, its
connection is defective or Fingerprint cable and system board may be faulty.
Check 1
Make sure Fingerprint cable is firmly connected to the connector CN5. If the
problem still occurs, perform Check 2.
Check 2
Fingerprint cable may be faulty. Replace it with a new one. If the problem still
occurs, perform Check4.
Check 3
Fingerprint may be faulty. Replace it with a new one following the steps in
Chapter 4. If the problem still occurs, perform Check 4.
Check 4
System board may be faulty. Replace it with a new one following the instruction in
Chapter 4.
Satellite P100 Maintenance Manual
Tests and Diagnostics
for
49
Advertisement
Chapters
Table of Contents
Troubleshooting
