hit counter script
Toshiba TECRA A3X User Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. Tecra A3X
  6. User manual
Toshiba TECRA A3X User Manual

Toshiba TECRA A3X User Manual

Computer
Hide thumbs Also See for TECRA A3X:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Maintenance Manual

Advertisement

Table of Contents
loading

Related Manuals for Toshiba TECRA A3X

Summary of Contents for Toshiba TECRA A3X

  • Page 2: Copyright

    This manual has been validated and reviewed for accuracy. The instructions and descriptions it contains are accurate for the TOSHIBA TECRA A3X Portable Personal Computer at the time of this manual’s production. However, succeeding computers and manuals are subject to change without notice.

  • Page 3: Eu Declaration Of Conformity

    Low Voltage Directive 73/23/EEC for the supplied power adapter. CE Marking is the responsibility of TOSHIBA EUROPE GmbH, Hammfelddamm 8, 41460 Neuss, Germany, phone +49-(0)-2131-158-01. For a copy of the related CE Declaration of Conformity please refer to the following website: http://epps.toshiba-teg.com.

  • Page 4: Modem Warning Notice

    TECRA A3X Modem warning notice Conformity Statement The equipment has been approved to [Commission Decision “CTR21”] for pan-European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries/regions the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point.

  • Page 5: Optical Disc Drive Safety Instructions

    TECRA A3X Optical disc drive safety instructions The optical disc drive employs a laser system. To ensure proper use of this product, please read the manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
  • Page 6 TECRA A3X This computer is equipped with one of the optical drive in the following list according to the model: Manufacturer Type TEAC CD-ROM CD-224E TEAC DVD-ROM DV-28E TEAC DVD Super Multi with ±R Double Layer Recording DV-W28EA TSST (TOSHIBA...

  • Page 7: Table Of Contents

    Table of Contents Copyright..........ii Disclaimer .
  • Page 8 DLA for TOSHIBA ........
  • Page 9 TOSHIBA support ........
  • Page 10 Certification agencies ........D-1 TOSHIBA Anti-theft Protection Timer...

  • Page 11: Preface

    This manual tells how to set up and begin using your TECRA A3X computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.

  • Page 12: Manual Contents

    Preface Manual contents This manual is composed of the following ten chapters, six appendixes, a glossary and an index. Chapter 1, Introduction, is an overview of the computer’s features, capabilities, and options. Chapter 2, The Grand Tour, identifies the components of the computer and briefly explains how they function.

  • Page 13: Conventions

    Preface Conventions This manual uses the following formats to describe, identify, and highlight terms and operating procedures. Abbreviations On first appearance, and whenever necessary for clarity, abbreviations are enclosed in parentheses following their definition. For example: Read Only Memory (ROM). Acronyms are also defined in the Glossary. Icons Icons identify ports, dials, and other parts of your computer.
  • Page 14 Preface Messages Messages are used in this manual to bring important information to your attention. Each type of message is identified as shown below. Pay attention! A caution informs you that improper use of equipment or failure to follow instructions may cause data loss or damage your equipment.

  • Page 15: General Precautions

    General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.

  • Page 16: Rtc Battery

    PC card overheating Some PC cards can become hot with prolonged use. Overheating of a PC card can result in errors or instability in the PC card operation. Also be careful when you remove a PC card that has been used for a long time. Mobile phone Use of mobile phones can interfere with the audio system.

  • Page 17: Introduction

    Some of the features described in this manual may not function properly if you use an operating system that was not preinstalled by TOSHIBA. Equipment checklist Carefully unpack your computer. Save the box and packing materials for future use.
  • Page 18 TOSHIBA Controls ■ TOSHIBA Zooming Utility ■ TOSHIBA Password Utility ■ Atheros Client Utility ■ TOSHIBA Hotkey Utility for Display Devices ■ TOSHIBA Display Device Change Utility ■ TOSHIBA Mobile Extension for Windows XP ■ InterVideo WinDVD Creator 2 Platinum ■...

  • Page 19: Features

    Warranty Information If any of the items are missing or damaged, contact your dealer. Features The computer uses TOSHIBA’s advanced Large Scale Integration (LSI), Complementary Metal-Oxide Semiconductor (CMOS) technology extensively to provide compact size, minimum weight, low power usage, and high reliability. This computer incorporates the following features and...
  • Page 20 Introduction Memory Slots The slot accepts a 256, 512 or 1,024 MB memory modules can be installed in the two memory slots for a maximum of 2,048 MB system memory. Video RAM Maximum 128 MB of RAM is provided for video display.
  • Page 21 Introduction Disks Hard disk drive Available in four sizes. ■ 40.0 billion bytes (37.26 GB) ■ 60.0 billion bytes (55.88 GB) ■ 80.0 billion bytes (74.52 GB) ■ 100.0 billion bytes (93.16 GB) Disclaimer (HDD Drive Capacity) For more information on the Disclaimer regarding HDD Drive Capacity, please refer to the Disclaimers section in Chapter 10.
  • Page 22 Introduction DVD-ROM drive Some models are equipped with a full-size, DVD-ROM drive module that lets you run either 12 cm (4.72") or 8 cm (3.15") CDs or 12 cm (4.72") DVDs without using an adaptor. It runs DVD-ROMs at maximum 8 speed and CD-ROMs at maximum 24 speed.

  • Page 23: Pointing Device

    Introduction Display The computer’s LCD panel supports high-resolution video graphics. The screen can be set at a wide range of viewing angles for maximum comfort and readability. Built-in 15.0" XGA/SXGA+ TFT screen, 16 M colors, with one of the following resolutions: ■...
  • Page 24 Introduction Ports Parallel Parallel printer or other parallel device (ECP compatible). Serial RS-232C compatible port (16550 UART compatible). External monitor 15-pin, analog VGA port supports VESA DDC2B compatible functions. Universal Serial Bus The computer has Universal Serial Bus ports that (USB 2.0) comply with the USB 2.0 standard, which enables data transfer speeds 40 times faster...
  • Page 25 Introduction Communications Modem An internal modem provides capability for data and fax communication. It supports V.90 (V.92). The speed of data transfer and fax depends on analog telephone line conditions. It has a modem jack for connecting to a telephone line. It is preinstalled as a standard device in some markets.

  • Page 26: Special Features

    Special features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. TOSHIBA Assist Press this button to launch an application automatically.
  • Page 27 Power is restored when the hard disk is accessed. You can specify the time in the HDD power off item of the Basic Setup tab in TOSHIBA Power Saver. System automatic...

  • Page 28: Utilities

    TOSHIBA Assist TOSHIBA Assist is a graphical user interface that provides easy access to help and services. It is the default function launched by the TOSHIBA Assist button.
  • Page 29 CD-RW disc via a drive letter like a floppy disk or other removable disks. TOSHIBA PC TOSHIBA PC Diagnostic Tool displays the basic Diagnostic Tool information on PC, and the test of built-in devices can also be performed.To start TOSHIBA PC...

  • Page 30: Options

    Introduction TOSHIBA ConfigFree ConfigFree is a suite of utilities to allow easy control of communication device and network connections. ConfigFree also allows you to find communication problems and create profiles for easy switching between location and communication networks. To start ConfigFree,...
  • Page 31 Wireless communications can be carried out with Bluetooth-compatible equipment by connecting to the USB port of the computer. You can buy the module from TOSHIBA dealer. Mobile HDD A mobile external hard disk drive that is compatible with USB2.0. Data can be read and written by connecting to the USB port of the computer.

  • Page 32: Chapter 2 The Grand Tour

    Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Disclaimer (Non-applicable Icons)*7 For more information on the Disclaimer regarding Non-applicable Icons, please refer to the Disclaimers section in Chapter 10. Click the *7. Front with the display closed Figure 2-1 shows the computer’s front with its display panel in the closed position.

  • Page 33: Left Side

    The Grand Tour Left side Figure 2-2 shows the computer’s left side. PC card slot * Cooling vents Wireless communication switch indicator * i.LINK(IEEE1394)port * Security lock USB port Wireless communication External monitor port switch * Figure 2-2 The left side of the computer * The availability of this feature depends on the model you purchased External monitor This 15-pin port lets you connect an external...

  • Page 34: Right Side

    The Grand Tour Operation of all functions of all USB devices has not been confirmed. Some functions might not execute properly. i.LINK (IEEE1394) Connect an external device, such as a digital port video camera to this port for high-speed data transfer.

  • Page 35: Backside

    The Grand Tour Microphone jack A 3.5 mm mini microphone jack enables connection of a three-conductor mini jack for monaural microphone input. Fixed Optical media The computer is configured with a full-size optical drive media drive module that lets you run either 12 cm (4.72") or 8 cm (3.15") disks without using an adaptor.
  • Page 36 The Grand Tour LAN active indicator Link indicator Modem jack LAN jack Serial port Figure 2-4-2 The backside of the computer (Serial port model) LAN active indicator Link indicator TV-out jack USB port Modem jack LAN jack Figure 2-4-3 The backside of the computer (USB port/Video-out jack model) Parallel port This Centronics-compatible, 25-pin parallel port is used to connect a parallel printer or other...

  • Page 37: Underside

    The Grand Tour LAN jack This jack lets you connect to a LAN. The adaptor has built-in support for Ethernet LAN Ether (10 megabits per second, 10BASE-T) and Fast Ethernet LAN (100 megabits per second, 100BASE-TX). The LAN has two indicators. Refer to Chapter 4, Operating Basics, for details.

  • Page 38: Front With The Display Open

    Zoom in (+) button* Zoom out (-) button* Stereo speaker (Left) Touch Pad Power button Touch Pad control TOSHIBA Assist buttons button TOSHIBA Presentation button Figure 2-6 The front of the computer with the display open * Some models are equipped with the Zoom in button (+) and Zoom out (-) button.
  • Page 39 Presentation button display on LCD and CRT with resolution of 1024 × 768 by default. This button setting can be changed on TOSHIBA Controls properties. When "Presentation (Different Image)" (Windows XP only) is set to this button, you can switch to the multi-monitor display on LCD and CRT.
  • Page 40 Hibernation mode. Use the TOSHIBA Power Saver Utility to enable or disable this feature. The default is “enabled”. Refer to the TOSHIBA Power Saver Utility and Panel Power Off/On items in Chapter 1, Introduction, for details on settings.

  • Page 41: System Indicators

    The Grand Tour System indicators DC IN 15V Power Battery Built-in HDD Figure 2-7 System indicators DC IN 15V The DC IN 15V indicator glows green when DC power is supplied from the AC power adaptor. If the adaptor’s output voltage is abnormal or if the power supply malfunctions, this indicator flashes orange.

  • Page 42: Keyboard Indicators

    The Grand Tour Keyboard indicators The figures below show the positions of the keypad overlay indicators and the Caps Lock indicator. When the F10 key indicator glows the keypad overlay lets you control the cursor. When the F11 key indicator glows the keypad overlay lets you enter numbers.

  • Page 43: Usb Floppy Disk Drive

    The Grand Tour USB floppy disk drive A 3 1/2" floppy disk drive accommodates 1.44-megabyte or 720-kilobyte floppy disks. It connects to the USB port. Disk-In-Use Floppy disk slot Eject button Indicator Figure 2-10 USB floppy disk drive Disk-In-Use This indicator lights when the floppy disk is being accessed.

  • Page 44: Fixed Optical Media Drives

    The Grand Tour Fixed optical media drives One of the following optical media drives is installed in the computer: DVD-ROM, DVD-ROM&CD-R/RW, DVD Super Multi drives. An ATAPI interface controller is used for CD/DVD-ROM operation. When the computer is accessing a CD/DVD, an indicator on the drive glows. Region codes for DVD drives and media DVD-ROM, DVD-ROM&CD-R/RW, DVD Super Multi drives and media are manufactured according to the specifications of six marketing regions.
  • Page 45 The Grand Tour DVDs ■ DVD-R discs can be written only once. The recorded data cannot be erased or changed. ■ DVD-RW discs can be recorded more than once. ■ DVD-RAM discs can be recorded more than once. ■ DVD+R discs can be written only once. The recorded data cannot be erased or changed.

  • Page 46: Ac Adaptor

    The Grand Tour DVD Super Multi drive The full-size DVD Super Multi drive module lets you record data to rewritable CDs as well as run either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without using an adaptor. The read speed is slower at the center of a disc and faster at the outer edge.
  • Page 47 Use only the AC adaptor that came with the computer or an equivalent optional adaptor. Use of any other adaptors could damage your computer. TOSHIBA assumes no liability for any damage in such case. Use only the AC adaptor that came with the computer or an equivalent optional adaptor.

  • Page 48: Chapter 3 Getting Started

    Chapter 3 Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: ■ Setting up your work space — for your health and safety Be sure also to read Instruction Manual for Safety & Comfort. This guide, which is included with the computer, explains product liability.

  • Page 49: Setting Up Your Work Space

    Getting Started Setting up your work space Establishing a comfortable work site is important for you and your computer. A poor work environment or stressful work habits can result in discomfort or serious injury from repetitive strain to your hands, wrists or other joints.

  • Page 50: Placement Of The Computer

    Getting Started Placement of the computer Position the computer and peripheral devices to provide comfort and safety. ■ Set the computer on a flat surface at a comfortable height and distance. The display should be no higher than eye level to avoid eyestrain. ■...

  • Page 51: Work Habits

    Getting Started Lighting Proper lighting can improve legibility of the display and reduce eyestrain. ■ Position the computer so that sunlight or bright indoor lighting does not reflect off the screen. Use tinted windows, shades or other screen to eliminate sun glare. ■...

  • Page 52: Installing The Battery Pack

    Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Do not touch the latch while holding the computer. Or you may get injured by the dropped battery by unintentional release of the latch.

  • Page 53: Connecting The Ac Adaptor

    Use only the AC adaptor supplied with your computer or an equivalent adaptor that is compatible. Use of any incompatible adaptor could damage your computer. TOSHIBA assumes no liability for any damage caused by use of an incompatible adaptor. ■...

  • Page 54: Opening The Display

    Getting Started Figure 3-3-2 Connecting the power cord to the AC adaptor (3-pin plug) The Universal AC Adaptor and power cord bundled with this product may differ depending on the product model. Depending on the model, a 2-pin plug or 3-pin plug set of the above may be bundled. 2.

  • Page 55: Turning On The Power

    Getting Started Display latch Figure 3-5 Opening the display Turning on the power This section describes how to turn on the power. After you turn on the power for the first time, do not turn it off until you have set up the operating system.

  • Page 56: Windows Xp Setup

    Getting Started Windows XP setup When you first turn on the power, the computer’s initial screen is the Microsoft ® Windows ® XP Professional Startup Screen Logo. Follow the on-screen directions. Be sure to read the License Agreement carefully. Turning off the power The power can be turned off in one of the following modes: Shut down (Boot), Hibernation or Standby mode.

  • Page 57: Starting Hibernation

    For the computer to shut down in hibernation mode, the hibernation feature must be enabled in two places: the Hibernate tab in Power Options and Setup Action tab in TOSHIBA Power Saver. Otherwise, the computer will shut down in Standby mode - if battery power becomes depleted, data saved in Standby mode will be lost.

  • Page 58: Standby Mode

    ■ When the AC adaptor is connected, the computer will go into Standby mode according to the settings in the TOSHIBA Power Saver utility. ■ To restore operation from Standby mode, press the power button or press any key. The latter action works only if Wake-up on Keyboard is enabled in HW Setup.

  • Page 59: Restarting The Computer

    1. Click start, click Turn Off Computer and click Stand by. 2. Close the display panel. Open TOSHIBA Power Saver, select the Setup Action tab and enable the desired setting for When I close the lid. Click the OK button.

  • Page 60: Restoring The Preinstalled Software From Product Recovery

    Restoring TOSHIBA utilities and drivers If Windows is working properly, individual drivers or applications can be separately restored. The TOSHIBA Tools & Utilities folder (C:\TOOLSCD) contains drivers and applications, which are included with your computer system. If your system drivers or applications have become damaged in some way, you can reinstall most of the components from this folder.

  • Page 61: Chapter 4 Operating Basics

    Chapter 4 Operating Basics This chapter gives information on basic operations including using the Touch Pad, the USB floppy disk drive, optical media drives, Sound System, modem, the wireless communication and LAN. It also provides tips on caring for your computer and on heat dispersal. Using the Touch Pad To use the Touch Pad, simply touch and move your finger tip across it in the direction you want the on-screen pointer to go.

  • Page 62: Using The Usb Floppy Disk Drive

    Operating Basics For some functions, you can tap the Touch Pad instead of pressing a control button. Click: Tap the Touch Pad once Double-click: Tap the Touch Pad twice Drag and drop: 1. Hold down the left control button and move the cursor to drag the item you want to move.

  • Page 63: Using Optical Media Drives

    Operating Basics Disconnecting 3 1/2" floppy disk drive When you have finished using the floppy disk drive, follow the procedures below to disconnect it: 1. Wait for the indicator light to go out to make sure all floppy disk activity has stopped.

  • Page 64: Loading Discs

    Operating Basics Loading discs To load CD/DVDs, follow the steps below and refer to figures 4-3 to 4-7. 1. a. When the power is on, press the DVD-ROM eject button to open the drawer slightly. Eject button Figure 4-3 Pressing the DVD-ROM eject button b.
  • Page 65 Operating Basics 3. Lay the CD/DVD, label side up, in the drawer. Figure 4-6 Inserting a CD/DVD When the drawer is fully opened, the edge of the computer will extend slightly over the CD/DVD tray. Therefore, you will need to turn the CD/DVD at an angle when you place it in the tray.

  • Page 66: Removing Discs

    Operating Basics Removing discs To remove the CD/DVD, follow the steps below and refer to figure 4-8. Do not press the eject button while the computer is accessing the DVD-ROM drive. Wait for the optical media drive indicator to go out before you open the drawer.

  • Page 67: Writing Cds On Dvd-Rom&Cd-R/Rw Drive

    ■ Ultra-Speed CD-RW: MITSUBISHI CHEMICAL CORPORATION TOSHIBA has confirmed the operation of CD-R and CD-RW media of the manufacturers above. Operation of other media cannot be guaranteed. ■ The actual number of rewrites is affected by the quality of the media and the way it is used.

  • Page 68: Writing Cd/Dvds On Dvd Super Multi Drive

    Operating Basics ■ Writing with software other than Sonic RecordNow! has not been confirmed. Therefore, operation with other software cannot be guaranteed. When writing or rewriting Note the following when you write or rewrite a CD-R or CD-RW. ■ Always copy data from the HDD to the CD. Do not use cut-and-paste. The original data will be lost if there is a write error.

  • Page 69: Before Writing Or Rewriting

    Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of CD-R/RW and DVD-R/+R/-RW/+RW/-RAM disc. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates.
  • Page 70 Operating Basics DVD+RW: MITSUBISHI CHEMICAL CORPORATION RICOH Co., Ltd. DVD-RAM:(DVD DVD Specifications for DVD-RAM Disc for Super Multi drive only) Version 2.0, Version 2.1 or Version 2.2 Matsushita Electric Industrial Co., Ltd. Hitachi Maxell Ltd. This drive cannot use discs that allow writing faster than 8 speed (DVD-R, DVD+R), 4 speed (DVD-RW, DVD+RW), 5 speed (DVD-RAM), 2 speed (DVD-R DL), 2.4 speed (DVD+R DL).

  • Page 71: When Writing Or Rewriting

    Operating Basics ■ Do not write while virus check software is running. Wait for it to finish and then disable virus detection programs including any software that checks files automatically in the background. ■ Do not use hard disk utilities, including those intended to enhance HDD access speed.

  • Page 72: Recordnow! Basic For Toshiba

    Operating Basics RecordNow! Basic for TOSHIBA Note the following limitations when you use RecordNow!: ■ DVD-Video cannot be created using RecordNow!. ■ DVD-Audio cannot be created using RecordNow!. ■ You cannot use RecordNow!'s “Audio CD for Car or Home CD Player”...

  • Page 73: Dla For Toshiba

    3. Mark the Verify data written to the disc after burning check box in the Data Options. 4. Click the OK button. DLA for TOSHIBA Note the following limitations when you use DLA: ■ When you install an application with which installation discs consists of two or more CD/DVDs, please disable the packet-writing software DLA before beginning installation.

  • Page 74: Windvd Creator 2 Platinum

    Operating Basics WinDVD Creator 2 Platinum As for InterVideo WinDVD Creater2 Platinum. Only models which can write to DVD are attached. Note the following limitations when you write video to DVD: ■ When installing, uninstalling and using InterVideo WinDVD Creator 2 Platinum, the computer should be set to system administrator or equivalent privilege.

  • Page 75: Media Care

    Operating Basics Media care This section provides tips on protecting data stored on your CD/DVDs and floppy disks. Handle your media with care. The following simple precautions will increase the lifetime of your media and protect the data stored on them: CD/DVDs 1.

  • Page 76: Sound System

    Operating Basics Sound System This section describes audio controls including sound levels and power management. Volume control The Volume Control utility lets you control the audio volume in Windows for both playback and recording. ■ To launch Volume Control for playback, click start, point to All Programs, point to Accessories, point to Entertainment and click Volume Control.

  • Page 77: Modem

    To select a region, follow the steps below. 1. Click start, point to All Programs, point to TOSHIBA Internal Modem and click Region Select Utility. Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available.

  • Page 78: Modem Selection

    Operating Basics Setting You can enable or disable the following settings: AutoRun Mode The Region Select utility starts automatically when you start up the operating system. Open the Dialing Properties dialog box after selecting region. The dialing properties dialog box will be displayed automatically after you select the region.
  • Page 79 Operating Basics Connecting To connect the modem cable, follow the steps below. ■ The modular cable that comes with the computer must be used to connect a modem. Connect the end of the modular cable with the core to the computer. ■...

  • Page 80: Wireless Lan

    TOSHIBA strongly recommend the customer to enable the WEP function. ■ TOSHIBA is not liable for the eavesdropping of data due to the use of Wireless LAN and the damage thereof. Wireless communication switch You can enable or disable Wireless LAN function, with the on/off switch. No transmissions are sent or received when the switch is off.

  • Page 81: Lan

    Operating Basics Wireless communication indicator The wireless communication indicator indicates the status of the wireless communication functions. Indicator status Indication Indicator off Wireless communication switch is set to off. Automatic power down because of overheating. Power malfunction Indicator glows Wireless communication switch is on. Wireless LAN is turned on by an application.

  • Page 82: Connecting Lan Cable

    Operating Basics Connecting LAN cable To connect the LAN cable, follow the steps below. 1. Turn off the power to the computer and to all external devices connected to the computer. 2. Plug one end of the cable into the LAN jack. Press gently until you hear the latch click into place.

  • Page 83: Cleaning The Computer

    Operating Basics Cleaning the computer To help ensure long, trouble-free operation, keep the computer free of dust and use care with liquids around the computer. ■ Be careful not to spill liquids into the computer. If the computer does get wet, turn the power off immediately and let the computer dry completely before you turn it on again.

  • Page 84: Heat Dispersal

    CPU speed. Or, by lowering the CPU speed first, then if necessary, turning on the fan. Use the Cooling Method item of the Basic Setup tab in TOSHIBA Power Saver. Maximum Turns on the fan first, then if necessary, lowers the CPU Performance processing speed.

  • Page 85: Chapter 5 The Keyboard

    Chapter 5 The Keyboard The computer’s keyboard layouts are compatible with a 101/102-key enhanced keyboard. By pressing some keys in combination, all the 101/ 102-key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/region’s keyboard layout your computer is configured with.

  • Page 86: F1 ... F12 Function Keys

    Soft keys: Fn key combinations The Fn (function) is unique to TOSHIBA computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features.

  • Page 87: Hot Keys

    The Keyboard Press Fn + F10 or Fn + F11 to access the integrated keypad. When activated, the keys with gray markings on the bottom edge become numeric keypad keys (Fn + F11) or cursor control keys (Fn + F10). Refer to Keypad overlay section in this chapter for more information on how to operate these keys.
  • Page 88 Continue holding down Fn and press F2 again to change the setting. You can also change this setting through the profile item in TOSHIBA Power Saver. Standby: When you press Fn + F3, the computer enters Standby. To avoid entering Standby unexpectedly, a dialog box appears for verification.
  • Page 89 You can also change this setting through the Screen brightness item of the Basic Setup tab in TOSHIBA Power Saver. ■ The brightness level is always set at the maximum value for about 18 seconds, when the LCD turns on.

  • Page 90: Windows Special Keys

    Fn key. Fn Sticky key You can use the TOSHIBA Accessibility Utility to make the Fn key sticky, that is, you can press it once, release it, and then press an “F number” key. To start the TOSHIBA Accessibility Utility, click start, point to All Programs, point to TOSHIBA, point to Utilities and click Accessibility.

  • Page 91: Keypad Overlay

    The Keyboard Keypad overlay Your computer’s keyboard does not have an independent numeric keypad, but its numeric keypad overlay functions like one. The keys in the center of the keyboard with gray letters make up the numeric keypad overlay. The overlay provides the same functions as the numeric keypad on the 101/102-key enhanced keyboard in figure 5-2.

  • Page 92: Generating Ascii Characters

    The Keyboard Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard without turning off the overlay: 1. Hold Fn and press any other key. All keys will operate as if the overlay were off.

  • Page 93: Power

    Chapter 6 Power The computer’s power resources include the AC adaptor and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes. Power conditions The computer’s operating capability and battery charge status are affected by the power conditions: whether an AC adaptor is connected, whether a...

  • Page 94: Power Indicators

    Power Table 6-1 Power conditions continued Power on Power off (no operation) Battery charge • Operates adaptor is above low • LED: Battery off battery trigger DC IN 15V off connected point Battery charge • Operates is below low • LED: Battery battery trigger flashes orange point...

  • Page 95: Battery Types

    Power DC IN 15V indicator Check the DC IN 15V indicator to determine the power status with the AC adaptor connected: Indicates the AC adaptor is connected and Green supplying proper power to the computer. Indicates a problem with the power supply. Plug Flashing orange the AC adaptor into another outlet.

  • Page 96: High Capacity Battery Pack

    The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Do not remove the battery pack while the computer is in Standby mode.Data is stored in RAM, so if the computer loses power it will be...

  • Page 97: Battery Pack

    Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Do not remove the battery pack while the computer is in Standby mode.

  • Page 98: Care And Use Of The Battery Pack

    Press [F1] key to set Date/Time. The computer’s RTC battery is a Ni-MH battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of.
  • Page 99 Power Warning 1. Never attempt to dispose of a battery pack by burning or by throwing it into a fire, and never allow exposure to a heating apparatus (e.g., microwave oven). Heat can cause a battery pack to explode and possibly cause serious injury.
  • Page 100 Do not turn on the PC's power again until an authorized Toshiba service provider has checked it for safety. Continued use could cause a fire or rupture possibly resulting in serious injury or PC failure including but not limited to the loss of data.
  • Page 101 Power Caution 1. Use only battery packs recommended by TOSHIBA as replacements. 2. When installing a battery pack or before moving the PC, always make sure the battery pack is inserted correctly and securely. If the battery falls out, while you are carrying the PC, you could be injured or the battery pack could be damaged.

  • Page 102: Charging The Batteries

    The Battery indicator glows orange when the battery is being charged. Use only the computer connected to an AC power source or the optional TOSHIBA Battery charger to charge the battery pack. Never attempt to charge the battery pack with any other charger.

  • Page 103: Monitoring Battery Capacity

    Therefore, an often used, older battery will not operate for as long as a new battery even when both are fully charged. In this case, TOSHIBA Power Saver will indicate a 100% charge for both the old and new battery, but the displayed estimated time remaining will be shorter for the older battery.

  • Page 104: Maximizing Battery Operating Time

    ■ How you configure the computer (for example, whether you enable battery-power saving options). The computer provides a battery save mode, which can be set in TOSHIBA Power Saver, to conserve battery power. This mode has the following options: ■...

  • Page 105: Replacing The Battery Pack

    Power Extending battery life To maximize the life of your battery pack: ■ At least once a month, disconnect the computer from a power source and operate it on battery power until the battery pack fully discharges. Before doing so, follow the steps below. 1.

  • Page 106: Removing The Battery Pack

    (to the direction of the left), then slide out the battery pack. Battery release latch (1) Battery pack Battery release latch (2) Figure 6-3 Releasing the battery pack For environmental reasons, do not throw away a spent battery pack. Please return spent battery packs to your TOSHIBA dealer. User’s Manual 6-14...
  • Page 107 Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Do not touch the battery release latch while holding the computer or the battery pack might fall out due to the unintentional release of the battery release latch and cause injuries.

  • Page 108: Toshiba Password Utility

    Windows password. User password To start the utility, point to or click the following items: start -> All Programs -> TOSHIBA -> Utilities -> Password Utility ■ Set (button) Click this button to register a password of up to 50 characters. After a password is set, you will be prompted to enter it when you start the computer.

  • Page 109: Starting The Computer By Password

    To set a supervisor password, follow the steps below. 1. Click start. 2. Click Run. 3. Enter the following: C:\Program Files\Toshiba\Windows Utilities\SVPWTool\TOSPU.EXE If you set a supervisor password, some functions might be restricted when a user logs on with the user password.

  • Page 110: Power-Up Modes

    Chapter 3, Getting Started. Windows utilities You can specify the setting in TOSHIBA Power Saver. Hot keys You can use hot keys Fn + F3 to enter Standby mode and Fn + F4 to enter Hibernation. Refer to Chapter 5, The Keyboard ,for details.

  • Page 111: Chapter 7 Hw Setup

    Chapter 7 HW Setup This chapter explains how to use TOSHIBA HW Setup program to configure your computer. And the method of a setup of Execute-Disable Bit Capability and TPM is explained. TOSHIBA HW Setup lets you configure settings for General, Display, Boot Priority, Keyboard, CPU, LAN, Device Config, Parallel/Printer and USB.
  • Page 112 HW Setup General This window displays the BIOS version and contains two buttons: Default and About. Return all HW Setup values to the factory Default settings. Display the HW Setup version. About Setup This field displays BIOS Version and date. Display This tab lets you customize your computer’s display settings for either the internal LCD screen or for an external monitor.

  • Page 113: Boot Priority

    HW Setup Boot Priority Boot Priority Options This option sets the priority for booting the computer. Select from the following settings: HDD −> FDD −> The computer looks for bootable files in the CD-ROM −> LAN following order: HDD, floppy disk drive, CD-ROM* and LAN (Default).
  • Page 114 HW Setup A bar will appear only under the selected device. 3. Use the cursor keys to highlight the boot device you want and press Enter. ■ If a supervisor password is set only, it is the following. ■ The menu above appear when you use the user password to start the computer.
  • Page 115 HW Setup USB Memory BIOS Support Type Set the type of the USB memory as a startup device. Set the type of USB memory to be equivalent to the HDD (Default). * Based on the [HDD] order in the [Boot Priority Options] item.
  • Page 116 HW Setup Wake-up on Keyboard When this feature is enabled and the computer is in Standby mode, you can turn on the computer by pressing any key. It is effective only for the internal keyboard and only when the computer is in standby mode. Enables the Wake-up on Keyboard.

  • Page 117: Device Config

    HW Setup The Wake-up on LAN function consumes power even when the system is off. Leave the AC adaptor connected while using this feature. Built-in LAN This feature enables or disables the Built-in LAN. Enables Built-in LAN functions. (Default) Enabled Disables Built-in LAN functions.

  • Page 118: Starting And Ending The Bios Setup Program

    Notes before using the BIOS Setup ■ In normal cases, changes in system configuration should be made in Windows using TOSHIBA HW Setup, TOSHIBA Password Utility, TOSHIBA Power Saver, Device Manager, etc. If the configuration in the BIOS setup program is different from the configuration in the Windows utility, the configuration in the Windows utility takes priority.
  • Page 119 (Available). Disable the Execute-Disable Bit Capability (Not Not Available Available) (Default). System configuration changes other than changes to this setting should be made in Windows using TOSHIBA HW Setup, TOSHIBA Password Utility, TOSHIBA Power Saver, Device Manager, etc. User’s Manual...

  • Page 120: Chapter 8 Optional Devices

    Chapter 8 Optional Devices Optional devices can expand the computer’s capabilities and its versatility. This chapter describes connection or installation of the following devices, which are available from your TOSHIBA dealer: Cards/memory ■ PC card ■ Memory expansion Power devices ■...

  • Page 121: Pc Card

    The computer is equipped with a PC card expansion slot that can accommodate one 5 mm Type II card. Any PC card that meets industry standards (manufactured by TOSHIBA or other vendor) can be installed. The slot supports 16-bit PC cards, including PC card 16’s multifunction card and CardBus PC cards.

  • Page 122: Removing A Pc Card

    Optional Devices Removing a PC card To remove the PC card, follow the steps below. 1. Open the Safety Remove Hardware icon on the system tray and disable the PC card. 2. Press the PC card eject button to extend it. 3.

  • Page 123: Memory Expansion

    RAM. This section describes how to install and remove a memory module. ■ Use only memory modules approved by TOSHIBA. ■ Do not try to install or remove a memory module under the following conditions. You can damage the computer and the module. Also, data will be lost.

  • Page 124: Installing Memory Module

    Optional Devices Installing memory module Follow the steps below to install a memory module. 1. Set the computer to boot mode and turn off the power. 2. Remove all cables connected to the computer. 3. Turn the computer upside down and remove the battery pack (refer to Chapter 6, Power).

  • Page 125: Removing Memory Module

    Optional Devices 8. Push the module down so it lies flat. Latches on either side will click into place to secure the module. Slot A Slot B Figure 8-4 Installing the memory module 9. Seat the cover and secure it with a screw. 10.

  • Page 126: Additional Battery Pack

    Optional Devices Latches Figure 8-5 Removing the memory module 6. Seat the cover and secure it with a screw and replace the battery pack. Additional battery pack You can increase the portability of the computer with additional battery packs. If you’re away from an AC power source and your battery runs low, you can replace it with a freshly charged battery.

  • Page 127: External Monitor

    7. Turn on the computer. 8. Start the HW Setup program. Refer to Chapter 7, Setup. 9. Select the Parallel/Printer tab from the TOSHIBA HW Setup window. 10. Set the Parallel Port Mode and press OK. 11. Choose Reboot for the change to take effect.

  • Page 128: Changing The Resolution

    Optional Devices A TV-out jack is provided with some models. You can connect a television set to the TV-out jack on the computer. Follow the steps below. If a television is connected to the computer, set the TV type in Display Properties.

  • Page 129: I.link (Ieee1394)

    There is a possibility that the original data will be damaged. There is a particular risk that some frames will be deleted in the case of digital video transfer. TOSHIBA assumes no liability for such loss of data. ■ Do not transfer data in areas where static electricity is easily generated or in areas subjected to electronic noise.

  • Page 130: Advanced Port Replicator Iil

    Optional Devices Connecting 1. Make sure the connectors are properly aligned and plug the i.LINK (IEEE1394) cable into the computer. 2. Plug the other end of the cable into the device. Note the following when you use i.LINK: ■ You may need to install drivers for your i.LINK devices. ■...

  • Page 131: Connecting The Port Replicator

    Optional Devices The following ports and accessories are available on the Advanced Port Replicator III. ■ RJ45 LAN jack ■ RJ11 Modem jack ■ External monitor port ■ Parallel port ■ Serial port ■ PS/2 mouse port ■ PS/2 keyboard port ■...

  • Page 132: Bluetooth Usb Adaptor

    A Bluetooth adaptor that has a USB connector. Wireless communications can be carried out with Bluetooth-compatible equipment by connecting to the USB port of the computer. You can buy the module from TOSHIBA dealer. Mobile HDD A mobille external hard disk drive that is compatible with USB2.0.

  • Page 133: Troubleshooting

    Chapter 9 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring.

  • Page 134: Preliminary Checklist

    Troubleshooting Preliminary checklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. ■ Make sure you turn on all peripheral devices before you turn on the computer.

  • Page 135: Hardware And System Checklist

    When the computer does not start properly, check the following items: ■ Self Test ■ Power Sources ■ Power-on Password Self test When the computer starts up, the self test will be run automatically, and the following will be displayed: In Touch with Tomorrow TOSHIBA User’s Manual...

  • Page 136: Overheating Power Down

    This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system, depending on how the Boot Priority is set in the TOSHIBA HW Setup program. If any of the following conditions are present, the self test failed: ■...

  • Page 137: Ac Power

    Troubleshooting AC power If you have trouble turning on the computer with the AC adaptor connected, check the DC IN 15V indicator. Refer to Chapter 6, Power for more information. Problem Procedure AC adaptor doesn’t Check the connections. Make sure the cord is power the computer firmly connected to the computer and a power (DC IN 15V indicator...

  • Page 138: Real Time Clock

    Troubleshooting Problem Procedure Unplug the AC adaptor and remove the battery to make sure the terminals are clean. If necessary wipe them with a soft dry cloth dipped in alcohol. Connect the AC adaptor and replace the battery. Make sure it is securely seated. Check the Battery indicator.

  • Page 139: Lcd Panel

    Troubleshooting Password Problem Procedure Cannot enter or forgot Contact your dealer. password For information on setting a password, refer to Chapter 7, Setup. Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 5, Keyboard.

  • Page 140: Hard Disk Drive

    Troubleshooting Hard disk drive Problem Procedure Computer does not Check if a floppy disk is in the floppy disk drive. If boot from hard disk a floppy disk is inserted, remove it and reboot. drive There may be a problem with your operating system files.
  • Page 141 Troubleshooting Problem Procedure Some CDs run correctly, The software or hardware configuration may but others do not be causing a problem. Make sure the hardware configuration matches your software’s needs. Check the CD’s documentation. Check the type of CD you are using. The drive supports: CD-ROM: CD-DA, CD-Text, Photo CD...
  • Page 142 Troubleshooting Problem Procedure Check the type of CD/DVD you are using. The drive supports: DVD-ROM: DVD-ROM, DVD-Video CD-ROM: CD-DA, CD-Text, Photo CD (single/multi-session), CD-ROM Mode 1, Mode 2, CD-ROM XA Mode 2 (Form1, Form2), Enhanced CD (CD-EXTRA), CD-G (Audio CD only), Addressing Method 2 Check the region code on the DVD.
  • Page 143 Tour. Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording.

  • Page 144: Dvd Super Multi Drive

    Troubleshooting DVD Super Multi drive For more information, refer to Chapter 4, Operating Basics. Problem Procedure You cannot access a Make sure the drive's drawer is securely closed. CD/DVD in the drive Press gently until it clicks into place. Open the drawer and make sure the CD/DVD is properly seated.

  • Page 145: Floppy Disk Drive

    Troubleshooting Floppy disk drive For more information, refer to Chapter 4, Operating Basics. Problem Procedure Drive does not operate There may be a faulty cable connection. Check the connection to the computer and to the drive. Some programs run The software or hardware configuration may be correctly but others do causing a problem.

  • Page 146: Touch Pad

    Troubleshooting Pointing device If you are using a USB mouse, also refer to the USB section in this chapter and to your mouse documentation. Touch Pad Problem Procedure On-screen pointer The system might be busy. If the pointer is does not respond to shaped as an hourglass, wait for it to standby its Pad operation normal shape and try again to move it.

  • Page 147: Usb Mouse

    Troubleshooting USB mouse Problem Procedure On-screen pointer The system might be busy. If the pointer is does not respond to shaped as an hourglass, wait for it to resume its mouse operation normal shape and try again to move it. Make sure the mouse is properly connected to the USB port.
  • Page 148 Troubleshooting Memory expansion Refer also to Chapter 8, Optional Devices, for information on installing memory modules. Problem Procedure You hear a pattern of Make sure the memory module installed in the beeps. expansion slot is compatible with the computer. (Two beeps: a long If an incompatible module has been installed, beep followed by a follow the steps below.
  • Page 149 Troubleshooting The computer will not Unsupported memory modules (with SPD) are start and the following installed in both Slot A and B. sequence of beeps sounds: Long, short, no sound, long, short, short, ... The computer will not One or more unsupported memory modules start and no beeps are (without SPD) are installed in the slots.
  • Page 150 Troubleshooting i.LINK (IEEE1394) Problem Procedure i.LINK device does not Make sure the cable is securely connected to the function computer and to the device. Make sure the device’s power is turned on. Reinstall the drivers. Open the Windows Control Panel and double-click the Add Hardware icon. Follow the on-screen directions.
  • Page 151 Troubleshooting Problem Procedure You cannot receive an Check the rings before auto answer setting in incoming call your communications application. You can also use the ATS0 command. If problems persist, contact your dealer. Problem Procedure Cannot access LAN Check for a firm cable connection between the LAN jack and the LAN HUB.
  • Page 152 Troubleshooting Printer Refer also to the Parallel printer sections in Chapter 8, Optional Devices, and to the troubleshooting and other relevant sections in your printer and software documentation. Problem Procedure Printer does not turn Check that the printer is connected to an electric outlet.

  • Page 153: Toshiba Support

    Troubleshooting TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system, it is important to investigate other sources of assistance first.

  • Page 154: Cpu*1

    5°C to 30°C (41°F to 86°F) or >25°C (77°F) at high altitude (all temperature references are approximate and may vary depending on the specific computer model - please refer to your PC documentation or visit the Toshiba website at www.pcsupport.toshiba.com for details).

  • Page 155: Battery Life*2

    Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power.

  • Page 156: Graphics Processor Unit ("Gpu")*5

    Disclaimers Graphics Processor Unit (“GPU”) Graphics processor unit ("GPU") performance may vary depending on product model, design configuration, applications, power management settings and features utilized. GPU performance is only optimized when operating in AC power mode and may decrease considerably when operating in battery power mode.

  • Page 157: Specifications

    Appendix A Specifications This appendix summarizes the computer’s technical specifications. Physical Dimensions Weight (typical) For the weight, refer to the booklet of User’s Manual. Size 338 (w) × 274 (d) × 27/38 (h) millimeters (not including parts that extend beyond the main body) Weight will vary with configurations.

  • Page 158: Power Requirements

    Specifications Conditions Altitude (from sea level) Operating -60 to 3,000 meters Non-operating -60 to 10,000 meters maximum Power Requirements AC adaptor 100-240 volts AC 50 or 60 hertz (cycles per second) Computer 15 VDC 4.0 amperes Built-in Modem Network control unit (NCU) Type of NCU Type of line Telephone line (analog only)
  • Page 159 Specifications Communication Data transmission and reception speed 300/1200/2400/4800/7200/9600/12000/14400/ 16800/19200/21600/24000/26400/28800/31200/ 33600 bps Data reception only with V.90 28000/29333/30666/32000/33333/34666/36000/ 37333/38666/40000/41333/42666/44000/45333/ 46666/48000/49333/50666/52000/53333/54666/ 56000 bps 2400/4800/7200/9600/12000/14400 bps Transmitting level -10 dBm Receiving level -10 to -40 dBm Input/output 600 ohms ±30% impedance Error correcting MNP class 4 and ITU-T V.42 Data compression MNP class 5 and ITU-T V.42bis...

  • Page 160: Appendix B Display Controller And Modes

    Appendix B Display Controller and Modes Display controller The display controller interprets software commands into hardware commands that turn particular pels on or off. The controller is an advanced Video Graphics Array (VGA) that provides Extended Graphics Array (XGA) and Super Extended Graphics Array Plus (SXGA+) support for the internal LCD and external monitors.

  • Page 161: Video Modes

    Display Controller and Modes Video modes The computer supports video modes defined in the tables below. If your application offers a selection of mode numbers that do not match the numbers on the table, select a mode based on mode type, resolution, character matrix, number of colors and refresh rates.
  • Page 162 Display Controller and Modes Table1 Video modes (VGA) continued Video Type Resolution Character Scanning mode matrix colors colors frequency (pels) Vertical (Hz) 320 × 200 8 × 8 16 of 256K 16 of 256K Grph Pels 640 × 200 8 × 8 16 of 256K 16 of 256K Grph...
  • Page 163 Display Controller and Modes Table 2 Video modes (915GM/910GML) Video Type Resolution Character mode matrix (pels) 640 × 480 256/256K 256/256K 800 × 600 256/256K 256/256K 1024 × 768 256/256K 256/256K 1280 × 1024 256/256K 256/256K (Virtual with XGA Panel only) 1400 ×...
  • Page 164 Display Controller and Modes Table 2 Video modes (915GM/910GML) continued Video Type Resolution Character mode matrix (pels) 640 × 480 64K/64K 64K/64K 800 × 600 64K/64K 64K/64K 1024 × 768 64K/64K 64K/64K 1280 × 1024 64K/64K 64K/64K (Virtual with XGA Panel only) 1400 ×...
  • Page 165 Display Controller and Modes Table 2 Video modes (915GM/910GML) continued Video Type Resolution Character mode matrix (pels) 640 × 480 16M/16M 16M/16M 800 × 600 16M/16M 16M/16M 1024 × 768 16M/16M 16M/16M 1280 × 1024 16M/16M 16M/16M (Virtual with XGA Panel only) 1400 ×...

  • Page 166: Display Settings

    Display Controller and Modes Display Settings 1. You cannot move from the [Settings] tab of [Display Properties] to the multi-monitor when you are using the display of the computer and an external CRT display at the same time. ■ The [Settings] tab is displayed in the following steps; ■...
  • Page 167 Display Controller and Modes ® Figure B-2 Intel Graphics Media Acceleration Driver for Mobile 2. Some reproduced DVD picture may not be displayed when the display of the computer and a CRT display are used at the same. Reduce the resolution, use the display of the computer only, use the CRT display only or set display device in the multi-monitor, then play DVD.
  • Page 168 Display Controller and Modes ■ The following sub-panel is displayed, then click the circled part shown in figure B-4. Figure B-4 WinDVD 5.0 Sub-panel ■ The following [Set up] screen is displayed, then remove the check of [Use Hardware Decode Acceleration] (The check of [Use Hardware Color Acceleration] is removed automatically).
  • Page 169 (external LCD). To configure this setting, install "TOSHIBA Display Service for Ext.Monitor" and restart the machine in the following manner. a. Select the "TOSHIBA Application Installer" from the icon or start menu on a desktop. b. Since "TOSHIBA Application Installer" window starts and click the Next button.

  • Page 170: Wireless Lan

    Appendix C Wireless LAN This appendix is intended to help you get your Wireless LAN network up and running with a minimum of parameters. Card Specifications Form Factor Mini PCI TypeIII ■ IEEE 802.11 Standard for Wireless LANS Compatibility ■ Wi-Fi (Wireless Fidelity) certified by the Wi-Fi Alliance.

  • Page 171: Supported Frequency Sub-Bands

    Subject to the radio regulations that apply in the countries/regions, your Wireless LAN card may support a different set of 5 GHz/2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for information about the radio regulations that apply in the countries/regions.
  • Page 172 Wireless LAN 2462 2467* 2472* When installing Wireless LAN cards, the channel configuration is managed as follows: ■ For wireless clients that operate in a Wireless LAN Infrastructure, the Wireless LAN card will automatically start operation at the channel identified by the Wireless LAN Access Point. When roaming between different access points the station can dynamically switch to another channel if required.

  • Page 173: Ac Power Cord And Connectors

    Appendix D AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Minimum 2 meters...
  • Page 174 AC Power Cord and Connectors Finland: SETI Sweden: SEMKO France: Switzerland: Germany: United Kingdom: In Europe, power cords must be VDE type, H05VVH2-F and two conductor. For the United States and Canada, plug configuration must be a 2-15P (250 V) or 1-15P (125 V) as designated in the U.S. National Electrical code handbook and the Canadian Electrical Code Part II.

  • Page 175: Toshiba Anti-Theft Protection Timer

    When the time limit is exceeded, you are required to provide the Password for the BIOS and Hard Disk Drive to gain access to the system. To set permissions and limits for the TOSHIBA Anti-theft Protection Timer please use the TOSHIBA Password Utility.
  • Page 176 What is your address, phone, and fax number? To register the theft on paper, please follow these procedures: ■ Fill in the TOSHIBA Theft Registration form (or a copy of it) below. ■ Attach a copy of your receipt showing where your computer was purchased.
  • Page 177 In the Computer Systems page, open the Support & Downloads menu and choose the Stolen Units Database option. Your entries are used to track your computer at our service points. TOSHIBA Theft Registration Send to: TOSHIBA Europe GmbH Technical Service and Support Leibnizstr.
  • Page 178 Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AC: alternating current AGP: accelerated graphics port ANSI: American National Standards Institute APM: advanced power manager ASCII: American Standard Code for Information Interchange BIOS: basic input output system CD-ROM: Compact Disc-Read Only Memory CD-RW: Compact Disc-Read/Write...
  • Page 179 Glossary PCI: peripheral component interconnect RAM: random access memory RGB: red, green, and blue ROM: read only memory RTC: real time clock SCSI: small computer system interface SIO: serial input/output SXGA+: super extended graphics array plus TFT: thin-film transistor UART: universal asynchronous receiver/transmitter USB: Universal Serial Bus UXGA: ultra extended graphics array VESA: Video Electronic Standards Association...
  • Page 180 Glossary asynchronous: Lacking regular time relationship. As applied to computer communications, asynchronous refers to the method of transmitting data that does not require a steady stream of bits to be transmitted at regular time intervals. backup: A duplicate copy of files kept as a spare in case the original is destroyed.
  • Page 181 Glossary capacity: The amount of data that can be stored on a magnetic storage device such as a floppy disk or hard disk. It is usually described in terms of kilobytes (KB), where one KB = 1024 bytes and megabytes (MB), where one MB = 1024 KB.
  • Page 182 Glossary configuration: The specific components in your system (such as the terminal, printer, and disk drives) and the settings that define how your system works. You use the HW Setup program to control your system configuration. control keys: A key or sequence of keys you enter from the keyboard to initiate a particular function within a program.
  • Page 183 Glossary display: A CRT, LCD, or other image producing device used to view computer output. documentation: The set of manuals and/or other instructions written for the users of a computer system or application. Computer system documentation typically includes procedural and tutorial information as well as system functions.
  • Page 184 Fn, can be used to set system parameters, such as speaker volume. HW Setup: A TOSHIBA utility that lets you set the parameters for various hardware components. icon: A small graphic image displayed on the screen or in the indicator panel.
  • Page 185 Glossary input: The data or instructions you provide to a computer, communication device or other peripheral device from the keyboard or external or internal storage devices. The data sent (or output) by the sending computer is input for the receiving computer. instruction: Statements or commands that specify how to perform a particular task.
  • Page 186 Glossary LSI: Large Scale Integration. 1) A technology that allows the inclusion of up to 100,000 simple logic gates on a single chip. 2) An integrated circuit that uses large scale integration. main board: See motherboard. megabyte (MB): A unit of data storage equal to 1024 kilobytes. See also kilobyte.
  • Page 187 The electrical connection through which the computer sends and receives data to and from devices or other computers. Power Saver Utility: A TOSHIBA utility that lets you set the parameters for various power-saving functions. printed circuit board (PCB): A hardware component of a processor to which integrated circuits and other components are attached.
  • Page 188 A Class A device is sufficient for office use. Class B provides a more stringent classification for home equipment use. TOSHIBA portable computers comply with Class B computing device regulations. Random Access Memory (RAM): High speed memory within the computer circuitry that can be read or written to.
  • Page 189 TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. Touch Pad: A pointing device integrated into the TOSHIBA computer palm rest. TTL: Transistor-transistor logic. A logic circuit design that uses switching transistors for gates and storage.
  • Page 190 5-5 connecting, 3-6 controller, 1-7, B-1 DC IN 15V port, 2-4 hinge, 2-8 ASCII characters, 5-8 opening, 3-7 DLA for TOSHIBA, 1-13, 4-13 Documentation list, 1-3 Battery DVD Super Multi drive, 1-6 charging, 6-10 location, 2-3 extending battery life, 6-13...
  • Page 191 Index Floppy disk, 1-5 Keyboard, 1-7, 5-1 using, 4-2 emulating keys on enhanced, 5-2 Fn + Ctrl (enhanced keyboard’s F1 ... F12 function keys, 5-2 simulation), 5-3 hot keys, 5-3 Fn + Enter, 5-3 typewriter keys, 5-1 Fn + Esc (sound mute), 5-3 Windows special keys, 5-6 Fn + F1 (instant security), 5-4 Keypad overlay, 1-11, 5-7...
  • Page 192 Real Time Clock, 9-6 conditions, 6-1 Self test, 9-3 hibernation mode, 3-9 Sound system, 9-17 indicator, 6-3 Support from TOSHIBA, 9-21 panel power on/off, 1-11, 6-18 System start-up, 9-3 shut down mode (Boot mode), 3-9 USB, 9-15 standby mode, 3-11...
  • Page 193 TOSHIBA ConfigFree, 1-14 TOSHIBA Controls, 1-13 TOSHIBA Password Utility, 1-14 TOSHIBA PC DiagnosticTool, 1-13 TOSHIBA Power Saver, 1-12 TOSHIBA Theft Registration, F-2 TOSHIBA Touch Pad On/Off Utility, 1-14 TOSHIBA Utilities, 1-10 TOSHIBA Zooming Utility, 1-13 Touch Pad, 1-7 control buttons, 2-8...

Table of Contents