Table of Contents
Advertisement
12. Gently, push the memory module down until latches on either side
engage the module to hold it in place.
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
13. Connect the modem cable to the modem board.
14. Install the modem board. Be careful not to damage pins on the
connectors or to pinch the modem cable when you connect the
modem board to the system board.
15. Secure the modem board with two screws.
16. Rotate the keyboard into place. Insert six small tongues on the front
edge of the keyboard into corresponding notches on the computer.
Be sure the ribbon cable lies flat and is not pinched.
17. Secure the keyboard with two screws.
18. Set the keyboard brace into its groove and press down to secure the
latches.
19. Turn the computer upside down and replace the battery pack (refer
to Chapter 6, Power and Power-Up Modes).
20. Turn the computer on and execute Hardware Setup to check the total
memory. Refer to Chapter 8, Set-up and Password Security, for
details on Hardware Setup.
User's Manual
Installing a half-size module
Optional Devices 9-7
- Quick Links:
- Equipment Checklist
- Features
Hide quick links:
Advertisement
Table of Contents
