Page 2
• Do not disassemble, modify or repair drive. • A rattle heard when the drive is moved is normal and not a sign of failure. • The MK4007GAL and MK8007GAH do not use a standard ATA connector cable (see Drive Connectors/Pin-out section for additional information.) INTERFACE CONNECTOR FIGURE 1 –...
Page 3
TECHNICAL SUPPORT Should you require technical sup- port, contact your computer dis- tributor. If your distributor is unable to answer your questions, have them call Toshiba Storage Device Division Technical Support, on your behalf. TOSHIBA STORAGE DEVICE DIVISON TECHNICAL SUPPORT Phone: (510) 651-6798 E-mail: sdd_techhelp@pcs-sj.com...
Page 4
CSEL -DMARDY -DSTROBE DMACK GROUND INTRQ -IOCS16 - PDIAG/-CBLID -CS0 -CS1 DASP GROUND + 3.3V (LOGIC) + 3.3V (MOTOR) GROUND RESERVED Note: “-“ in front of signal name indicates negative logic. MK4007GAL/MK8007GAH Hard Disk Drive Installation Notes P/N 480065-A0 05/05...