4.200 rpm, 2.5-inch automotive-grade hard disk drive (2 pages)
Summary of Contents for Toshiba MK4007GAL
Page 1
TOSHIBA AMERICA INFORMATION SYSTEMS STORAGE DEVICE DIVISION IRVINE, CALIFORNIA MK4007GAL (HDD1622) 1.8-INCH HARD DISK DRIVE USER MANUAL Rev 02 11/2006...
5mm High • 15ms Average Seek Time • ATA-6 Interface • Ultra DMA 100 • 2Mbytes Buffer • Rotational speed of 4,200rpm • MTTF 300,000 Hours *Toshiba defines a megabyte (MB) as 1,000,000 bytes and a gigabyte (GB) as 1,000,000,000 bytes.
SETUP – MK4007GAL (HDD1622) HARD DISK DRIVE Caution: Your Hard Disk Drive is a precision device and even a small drop onto any surface can cause damage. Electronstatic discharge can also damage the drive. You should ground yourself prior to handling the drive.
USING THE HARD DISK DRIVE – MK4007GAL (HDD1622) HARD DISK DRIVE Backing up Data Files To avoid data loss, regularly back up the data files on the hard disk drive.
Internal Transfer Rate Host Transfer Rate Ultra DMA mode PIO Mode Interleave Factor *Toshiba defines a megabyte (MB) as 1,000,000 bytes and a gigabyte (GB) as 1,000,000,000 bytes. Internal Drive Characteristics Number of Disks Number of Data Heads Track Density (TPI)
Page 7
Physical Height Width Depth Weight Regulatory The drive satisfies the following standards: Underwriters Laboratories (UL) Canadian Standard Association (CSA) C22.2 No. 950 TUV Rheinland BSMI 0.2" (5.0mm) 2.13" (54.0mm) 3.09" (78.5mm) 1.8oz (51g) typ 1950 EN 60 950 3902C799...
DRIVE CONNECTORS – MK4007GAL (HDD1622) HARD DISK DRIVE Figure 1. MK4007GAL HDD - INTERFACE CONNECTOR Interface Connector Drive Side Connector Recommended Host Side Connector MCD-D50 Series by DDK Connectors MCD-D50 Series by DDK Connectors...
Page 9
Interface Signals Note: Symbol () in front of signal indicates negative logic. DRIVE INTERFACE SIGNALS SIGNAL RESET DD 7 DD 6 DD 5 DD 4 DD 3 DD 2 DD 1 DD 0 GROUND DMARQ DIOW/STOP DIOR/ -DMARDY HSTROBE IORDY/ -DMARDY/- DSTROBE DMACK...