SETUP – MK8007GAH (HDD1584) HARD DISK DRIVE Caution: Your Hard Disk Drive is a precision device and even a small drop onto any surface can cause damage. Electronstatic discharge can also damage the drive. You should ground yourself prior to handling the drive.
USING THE HARD DISK DRIVE – MK8007GAH (HDD1584) HARD DISK DRIVE Backing up Data Files To avoid data loss, regularly back up the data files on the hard disk drive.
SPECIFICATIONS –MK8007GAH (HDD1584) HARD DISK DRIVE General Model Interface Functionality Formatted Capacity Rotational Speed Avg. Rotational Latency Spin-up Time Buffer Seek Time Average Maximum Internal Transfer Rate Host Transfer Rate Ultra DMA mode PIO Mode Interleave Factor Internal Drive Characteristics...
Page 7
Physical Height Width Depth Weight Regulatory The drive satisfies the following standards: Underwriters Laboratories (UL) Canadian Standard Association (CSA) C22.2 No. 950 TUV Rheinland BSMI 0.315 (8.0mm) 2.13" (54.0mm) 3.09" (78.5mm) 2.19oz (62g) typ 1950 EN 60 950 3902C799...
DRIVE CONNECTORS –MK8007GAH (HDD1584) HARD DISK DRIVE Figure 1. MK8007GAH HDD - INTERFACE CONNECTOR Interface Connector Drive Side Connector Recommended Host Side Connector MCD-D50 Series by DDK Connectors MCD-D50 Series by DDK Connectors...
Page 9
Interface Signals Note: Symbol () in front of signal indicates negative logic. DRIVE INTERFACE SIGNALS SIGNAL RESET DD 7 DD 6 DD 5 DD 4 DD 3 DD 2 DD 1 DD 0 GROUND DMARQ DIOW/STOP DIOR/ -DMARDY HSTROBE IORDY/ -DMARDY/- DSTROBE DMACK...