Table of Contents
Advertisement
4 Replacement Procedures
4.5
MDC Modem
Removing the MDC Modem
The following describes the procedure for removing an MDC modem (See Figure 4-9).
CAUTION: The power must be turned off when you remove the MDC modem. Removing
an MDC modem with the power on risks damaging the modem or the computer itself.
1. Turn the computer upside down.
2. Remove the screw fixing the MDC slot cover and remove the cover. (This screw is
fixed to the MDC slot cover and can not be removed.)
3. Remove the following screws fixing the MDC modem.
• M2x4 BIND screw
4. Lift up the MDC modem and remove the MDC modem from the connector PJ3000 on
the system board.
5. Remove the MDC jack cable from JP1 on the MDC modem.
MDC Slot Cover
M2.5x4 THIN BIND
JP1
MDC Jack Cable
4-18
Figure 4-9 Removing MDC Modem
Satellite A10/TECRA A1/Satellite Pro A10 Maintenance Manual (960-445)
4.5 MDC Modem
x2
MDC Modem
PJ3000
Screw
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
