Table of Contents
Advertisement
Outdoor FM antenna (aerial)
Receiver
Radio stations cannot be tuned in.
• Check that the antennas (aerials) are
connected securely. Adjust the
antennas (aerials) and connect an
external antenna (aerial), if necessary.
• The signal strength of the stations is
too weak with automatic tuning. Use
direct tuning.
• Make sure you set the tuning scale
correctly (when tuning in AM stations
with direct tuning) (page 43).
• No stations have been preset or the
preset stations have been cleared
(when tuning by scanning preset
stations is used). Preset the stations
(page 43).
• Press AMP, then press DISPLAY
repeatedly on the remote control so
that the frequency appears on the
display panel.
RDS does not work.
• Make sure that you are tuned to an FM
RDS station.
• Select a stronger FM station.
• The station you tuned to is not
transmitting the RDS signal or the
signal strength is weak.
The RDS information that you want
*
does not appear.
• The service may be temporarily out of
order. Contact the radio station and
find out whether they actually provide
the service in question.
* Europe, Australia and Taiwan models only.
78
GB
*
iPod/iPhone
The sound is distorted.
2
• Press
– on the remote control
repeatedly.
• Set the "EQ" setting of the iPod/
iPhone to "Off" or "Flat".
There is no sound from the iPod/
iPhone.
• Disconnect the iPod/iPhone and
connect the iPod/iPhone again.
The iPod/iPhone cannot be charged.
• Check that the receiver is turned on.
• Make sure the iPod/iPhone is
connected firmly.
The iPod/iPhone cannot be operated.
• Check that you have removed the
protect case of the iPod/iPhone.
• Depending on the contents of the iPod/
iPhone, it may take time to start
playback.
• Disconnect the iPod/iPhone and
connect the iPod/iPhone again.
• You are using an unsupported iPod/
iPhone. See "Compatible iPod/iPhone
models" (page 36) for the supported
device types.
The ring volume of the iPhone does not
change.
• Adjust the ring volume using the
controls on the iPhone.
USB device
Are you using a supported USB
device?
• If you connect an unsupported USB
device, the following problems may
occur. See "Compatible USB devices"
(page 39) for the supported device
types.
– The USB device is not recognized.
Hide quick links:
Advertisement
Table of Contents
