hit counter script
Toshiba Satellite Pro P200 Series User Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. Satellite Pro P200 Series
  6. User manual

Toshiba Satellite Pro P200 Series User Manual

Hide thumbs Also See for Satellite Pro P200 Series:
Table of Contents

Advertisement

Quick Links

Download this manual
Satellite P200/Satellite Pro P200
TOSHIBA
Satellite P200/
Satellite Pro P200 Series
User's Manual

Advertisement

Table of Contents
loading

Related Manuals for Toshiba Satellite Pro P200 Series

Summary of Contents for Toshiba Satellite Pro P200 Series

  • Page 1 Satellite P200/Satellite Pro P200 TOSHIBA Satellite P200/ Satellite Pro P200 Series User's Manual...
  • Page 2 © 2007 by TOSHIBA Corporation. All rights reserved. Under copyright law, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.
  • Page 3 iLINK is a trademark of Sony Corporation. Other trademarks and registered trademarks not listed above may be used in this manual. Macrovision License of Notice This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision.
  • Page 4 ■ Before you connect the computer to a power source, ensure that the voltage rating of the AC adapter matches that of the available power source. 115V/60Hz in most of North and South America and some Far Eastern countries such as Taiwan. 100 V/50Hz in eastern Japan and 100 V/60Hz in western Japan.
  • Page 5 Use only the battery pack that came with the computer or an optional battery pack. Use of the wrong battery could damage your computer. TOSHIBA assumes no liability for any damage in such case. FCC information Model Name: Satellite P200/Satellite Pro P200 Series FCC notice "Declaration of Conformity Information"...
  • Page 6 Only peripherals complying with the FCC class B limits may be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's or expansion unit's external monitor port, parallel port, USB port and microphone jack.
  • Page 7 Regulation of the Canadian Department of Communications. Note that Canadian Department of Communications (DOC) regulations provide, that changes or modifications not expressly approved by TOSHIBA Corporation could void your authority to operate this equipment. This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
  • Page 8 Optical Disc Drive Safety Instruction ■ Be sure to check the international precautions at the end of this section. The optical drive that is used in this computer is equipped with a laser device. A classification label with the following sentence is affixed to the surface of the drive.
  • Page 9 TOSHIBA Samsung Storage Technology CD-RW/DVD-ROM TS-L462D ■ The CD-RW/DVD-ROM drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
  • Page 10 TEAC CD-RW/DVD-ROM DW-224E ■ The CD-RW/DVD-ROM drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■...
  • Page 11 Pioneer DVD Super Multi DVR-K17 ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■...
  • Page 12 TOSHIBA Samsung Storage Technology TS-L632D ■ The drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
  • Page 13 Hitachi-LG Data Storage DVD Super Multi GSA-T20N ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
  • Page 14 Panasonic DVD Super Multi UJ-850U ■ The DVD Super Multi drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■...
  • Page 15 TEAC DV-W28EC ■ The drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location. ■ Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.
  • Page 16 International Precautions CAUTION: This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT." To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest "AUTHORIZED service station."...
  • Page 17 VORSICHT: DIE VERWENDUNG VON ANDEREN STEURUNGEN ODER EINSTELLUNGEN ODER DAS DURCHFÜHREN VON ANDEREN VORGÄNGEN ALS IN DER BEDIENUNGSANLEITUNG BESCHRIEBEN KÖNNEN GEFÄHRLICHE STRAHLENEXPOSITIONEN ZUR FOLGE HABEN. Modem warning notice Conformity Statement The equipment has been approved to [Commission Decision "CTR21"] for pan- European single terminal connection to the Public Switched Telephone Network (PSTN).
  • Page 18 Japan regulations Region selection If you are using the computer in Japan, technical regulations described in the Telecommunications Business Law require that you select the Japan country mode. It is illegal to use the modem in Japan with any other selection. Redial Up to two redial attempts can be made.
  • Page 19 When you are notified, you will be given the opportunity to correct the problem and informed of your right to file a complaint with the FCC. In the event repairs are ever needed on your modem, they should be performed by TOSHIBA Corporation or an authorized representative of TOSHIBA Corporation. Disconnection...
  • Page 20 Instructions for IC CS-03 certified equipment 1. NOTICE: The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the user's satisfaction.
  • Page 21 Notes for Users in Australia and New Zealand Modem warning notice for Australia Modems connected to the Australian telecoms network must have a valid Austel permit. This modem has been specifically configured to ensure compliance with Austel standards when the country/region selection is set to Australia.
  • Page 22 ■ Some parameters required for compliance with Telecom's PTC Specifications are dependent on the equipment (PC) associated with this modem. The associated equipment shall be set to operate within the following limits for compliance with Telecom Specifications: a/ There shall be no more than 10 call attempts to the same number within any 30 minute period for any single manual call initiation, and b/ The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the...
  • Page 23 ■ It is recommended that this equipment be disconnected from the Telecom line during electrical storms. ■ When relocating the equipment, always disconnect the Telecom line connection before the power connection, and reconnect the power first. ■ This equipment may not be compatible with Telecom Distinctive Alert cadences and services such as FaxAbility.
  • Page 24 General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.
  • Page 25 Heat injury ■ Avoid prolonged physical contact with the computer. If the computer is used for long periods, its surface can become very warm. While the temperature will not feel hot to the touch, if you maintain physical contact with the computer for a long time, for example if you rest the computer on your lap or if you keep your hands on the palm rest, your skin might suffer a low-heat injury.
  • Page 26 xxvi Satellite P200/Satellite Pro P200...

  • Page 27: Table Of Contents

    Special features ........1-8 TOSHIBA Value Added Package ......1-9 Utilities and Applications .
  • Page 28 When Using Ulead DVD MovieFactory® for TOSHIBA ..4-30 TOSHIBA Disc Creator....... . 4-32 Media Care.
  • Page 29 Hardware and system checklist......9-3 TOSHIBA support ........9-18...
  • Page 30 Chapter 10 Disclaimers CPU ..........10-1 Memory (Main System) .
  • Page 31 If you are a new user of computers or if you're new to portable computing, first read over the Satellite P200/Satellite Pro P200 Series Features and The Grand Tour chapters to familiarize yourself with the computer's features, components and accessory devices.

  • Page 32: Preface

    Manual contents This manual has ten chapters, three appendixes and a glossary. Chapter 1, Satellite P200/Satellite Pro P200 Series Features, is an overview of the computer's special features, utilities, and options. Chapter 2, The Grand Tour, identifies the components of the computer and briefly explains how they function.

  • Page 33: Conventions

    Preface Conventions This manual uses the following formats to describe, identify, and highlight terms and operating procedures. Abbreviations On first appearance, and whenever necessary for clarity, abbreviations are enclosed in parentheses following their definition. For example: Read Only Memory (ROM). Acronyms are also defined in the Glossary. Icons Icons identify ports, dials, and other parts of your computer.

  • Page 34: Equipment Checklist

    Carefully unpack your computer. Save the box and packing materials for future use. Check to make sure you have all the following items: Hardware ■ Satellite P200/Satellite Pro P200 Series Portable Personal Computer ■ Universal AC Adapter and Power Cord ■...
  • Page 35 The system may not function properly if you use drivers that are not pre- installed or distributed by TOSHIBA. SD Memory Card Format Utility and other SD functions are packaged into TOSHIBA SD Memoory Utilities. When uninstalling the SD utilities, click Start Control Panel Uninstall a program, and select TOSHIBA SD Memory Utilities.
  • Page 36 Preface xxxvi Satellite P200/Satellite Pro P200...

  • Page 37: Features

    Basic features are described in a separate pamphlet. Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA. Features Please visit your region's web site for the configuration details of the model that you have purchased.
  • Page 38 Satellite P200/Satellite Pro P200 Series Features Chipset ® Mobile Intel 945GM/PM, 943GML Express Chipset T1 CardReader & 1394a Controller PCI8402 Realtek High Definition Audio Codec ALC861D Realtek 10M/100M/1Gbps LAN Controller RTL8111B, 10M/100M LAN Controller RTL8101E Memory The graphics system in your computer may use part of the main system memory for graphics performance and therefore reduce the amount of system memory available for other computing activities.
  • Page 39 Satellite P200/Satellite Pro P200 Series Features BIOS 1MB Flash ROM for system BIOS Suspend to memory or hard disk drive Various Hotkey functions for system control Complete ACPI 1.0b functionality Power Battery Pack 6-cell Lithium Ion smart battery pack with 10.8V*4000mAh...
  • Page 40 Satellite P200/Satellite Pro P200 Series Features TouchPad/Dual Mode Pad A TouchPad/Dual Mode Pad and control buttons in the palm rest enable control of the on-screen pointer. The Dual Mode Pad is a TouchPad that provides normal touchpad features in its default mode and switches to a DualMode interface when the upper right corner of the TouchPad is tapped.
  • Page 41 Satellite P200/Satellite Pro P200 Series Features CD-RW/DVD-ROM Some models are equipped with a full-size CD- drive RW/DVD-ROM module that lets you record data to rewritable CD/CD-RWs as well as run either 12cm (4.72") or 8cm (3.15") CD/DVDs without using an adapter. It reads DVD-ROMs at maximum 8x speed and CD-ROMs at maximum 24x speed.
  • Page 42 Satellite P200/Satellite Pro P200 Series Features Computers in this series can be configured with multiple types of optical disc drive. For more information on the optical disc drives available, talk to your dealer. More information on using the optical disc drive can be found in Chapter 4, Operating Basics.
  • Page 43 Satellite P200/Satellite Pro P200 Series Features Microphone jack A standard 3.5 mm mini microphone jack enables connection of monaural microphone input. Web Camera Record/Send still or video images with this integrated Web Camera. Communications (depending on configuration) Modem An internal modem provides capability for data and fax communication.

  • Page 44: Special Features

    Satellite P200/Satellite Pro P200 Series Features Special features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. Hotkeys Key combinations that let you quickly modify the system configuration directly from the keyboard without running a system configuration program.

  • Page 45: Toshiba Value Added Package

    Do not remove the battery pack while the computer is in Sleep mode. Data in memory will be lost. TOSHIBA Value Added Package This section describes the TOSHIBA Component features pre-installed on the computer. TOSHIBA Power TOSHIBA Power Saver provides you with the...

  • Page 46: Utilities And Applications

    The DVD player is used to play DVD Video media through an on-screen interface and functions. TOSHIBA ConfigFree ConfigFree is a suite of utilities to allow easy control of communication devices and network connections. ConfigFree also allows you to find...
  • Page 47 This utility is contained the setup module of TOSHIBA Disc Creator. You can boot TOSHIBA DVD-RAM Utility from the menu bar as follows. Start -> All Programs -> TOSHIBA -> CD&DVD Applications -> DVD-RAM Utility. TOSHIBA Hardware This program lets you customize your hardware...
  • Page 48 Lock button at the bottom of the right pane in the start menu. ■ TOSHIBA Assist: This can be used to open TOSHIBA Assist if it is already installed in your computer. 1-12 Satellite P200/Satellite Pro P200...

  • Page 49: Options

    * The availability of DDRII is dependent on the model you purchased. Battery Pack An additional battery pack can be purchased from your TOSHIBA dealer. Use it as a spare to increase your computer operating time. High capacity battery An additional battery pack can be purchased from pack your TOSHIBA dealer.
  • Page 50 Satellite P200/Satellite Pro P200 Series Features 1-14 Satellite P200/Satellite Pro P200...

  • Page 51: Chapter 2 The Grand Tour

    Satellite P200/Satellite Pro P200 Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Certain types of notebook chassis are designed to accommodate all possible configurations for an entire product series. Your selected model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features.
  • Page 52 The Grand Tour Front Edge Logo* Front Edge Logo indicates the computer series you bought. (The avaliability of this function is dependent on the model you purchased.) DC IN LED The DC IN LED indicates the computer is connected to the AC adapter and it is plugged into an AC power source.

  • Page 53: Right Side

    The Grand Tour Volume Control Use this dial to adjust the volume of the stereo speakers or headphones. Multiple Digital The Multiple Digital Media Card Slot allows you to Media Card Slot* use media cards from digital still cameras and various forms of portable information equipment.

  • Page 54: Left Side

    The Grand Tour To prevent possible over heating of the CPU, never block the fan vents. An optional security cable attaches to this port in Security Lock order to anchor your computer to a desk or other large object to deter theft. Left side The following figure shows the computer's left side.
  • Page 55 The Grand Tour LAN Jack This jack lets you connect to a LAN. The adapter has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX) and Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T).

  • Page 56: Underside

    The Grand Tour Underside The following figure shows the underside of the computer. Make sure the display is closed before turning over your computer. HDD2* ATTERY XPANSION EMORY OCKET ATTERY PEAKER ATTERY ATCH HDD1 * The availability of this feature is dependent on the model you purchased. The bottom of the computer Battery Pack The battery pack powers the computer when the...

  • Page 57: Front With The Display Open

    The Grand Tour Expansion Memory Use this socket to install a memory module to Socket increase your computer's memory. Refer to the Memory expansion section in Chapter 8, Optional Devices. To prevent possible overheating of the CPU, never block the fan vents. Battery Pack Latch With the Battery Pack Lock in its unlocked position, you can slide this latch in order to...
  • Page 58 The Grand Tour Display Screen The LCD displays high-contrast text and graphics at a resolution up to 1680 x 1050 pixels. Refer to Appendix B - Display Modes for further information. When the computer operates from the AC adapter, the display screen's image will be somewhat brighter than when it operates on battery power - this is normal and is designed to conserve battery power.
  • Page 59 The Grand Tour Stop* Stops playing the CD, DVD or digital audio. (The availability of this function depends on the model you purchased.) Previous Button* Skips backwards to the previous track, chapter or digital file. Refer to Chapter 4, Operating Basics, for details.

  • Page 60: Keyboard Indicators

    The Grand Tour Keyboard Indicators Numeric Mode You can use the keypad overlay (light gray labeled keys) for numeric input when the Numeric mode icon lights blue. Refer to the Keypad overlay section in Chapter 5, The Keyboard. Caps Lock The Caps Lock LED lights when you press the Caps Lock key.
  • Page 61 Writable discs This section describes the types of writable discs. Check the specifications for your drive to for the type of discs it can write. Use TOSHIBA Disc Creator to write compact discs. Refer to Chapter 4, Operating Basics. ■...
  • Page 62 See Chapter 6, Power and Power-Up Modes, for details. The AC adapter Use of the wrong adapter could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 19 volts DC.

  • Page 63: Chapter 3 Getting Started

    Satellite P200/Satellite Pro P200 Chapter 3 Getting Started This chapter provides basic information to get you started using your computer. It covers the following topics: Be sure also to read Instruction Manual for Safety & Comfort. This guide, which is included with the computer, explains product liability. ■...

  • Page 64: Connecting The Ac Adapter

    100 to 240 volts and 50 or 60 hertz. For details on using the AC adapter to charge the battery pack, refer to Chapter 6, Power and Power-Up Modes. Use of the wrong adapter could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 19 volts DC.

  • Page 65: Opening The Display

    Getting Started Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. 1. Push the display latch on the front of the computer. Opening the display 2. Lift the panel up and adjust it to the best viewing angle for you. Use reasonable care when opening and closing the display panel.

  • Page 66: Starting Up For The First Time

    Getting Started Turning on the power Starting up for the first time When you first turn on the power, the computer's initial screen is the ® Windows Vista Startup Screen Logo. Follow the on-screen directions for each screen. During setup, you can click the Back button to return to the previous screen.
  • Page 67 Getting Started ■ Make sure the Hard Disk Drive indicators is off. If you turn off the power while a disk (disks) is being accessed, you can lose data or damage the disk. ■ Never turn off the power while an application is running. Doing so could cause loss data.
  • Page 68 Getting Started Benefits of Sleep Mode The Sleep Mode feature provides the following benefits: ■ Restore the previous working enviroment more rapidly than does the Hibernation Mode feature. ■ Saves power by shutting down the system when the computer receives no input or hardware access for the time period set by the System Sleep Mode feature.
  • Page 69 Getting Started ■ Save your data. While entering Hibernation Mode, the computer saves the contents of memory to the hard disk drive. However, for safety sake, it is best to save your data manually. ■ Data will be lost if you remove the battery or disconnect the AC adaptor before the save is completed.

  • Page 70: Restarting The Computer

    Getting Started Automatic Hibernation Mode The computer can be configured to enter Hibernate Mode automatically when you press the power button or close the lid. In order to define these settings, you can follow the steps as described below: 1. Click Start and click the Control Panel. 2.

  • Page 71: System Recovery Options

    2. Switch on the computer and, when the In Touch with Tomorrow TOSHIBA prompt appears, press the F12 key to display the Boot Menu. 3. Use the up or down cursor key to select the CD-ROM/DVD drive in the display menu.

  • Page 72: Create An Optical Recovery Discs

    When removing pre-installed drivers / utilities or when installing, you can setup the respective drivers / utilities from the following folder. C: \TOSAPINS\*** When Installing TOSHIBA SD Memory Card Format or other SD utilities, select TOSHIBA SD Memory Utilities from C:\TOSAPINS\. Create an Optical Recovery Discs ■...

  • Page 73: Restoring The Pre-Installed Software From The Recovery

    Getting Started 3. Turn on your computer and allow it to load the Windows Vista™ operating system from the hard disk drive as normal. 4. Insert the first blank media into the optical disc drive tray. 5. Double click the Recovery Disc Creator icon on the Windows Vista™ desktop, or select the application from Start Menu.
  • Page 74 When removing pre-installed drivers / utilities or when installing, you can setup the respective drivers / utilities from the following folder. C: \TOSAPINS\*** When Installing TOSHIBA SD Memory Card Format or other SD utilities, select TOSHIBA SD Memory Utilities from C:\TOSAPINS\. 3-12...

  • Page 75: Chapter 4 Operating Basics

    Satellite P200/Satellite Pro P200 Chapter 4 Operating Basics This chapter gives information on basic operations including using the TouchPad/Dual Mode Pad, optical disc drives, the internal modem, LAN and wireless LAN. It also provides tips on caring for your computer and on heat dispersal.

  • Page 76: Dual Mode Pad Button Function (Dual Mode Pad Is Provided With Some Models)

    Operating Basics The TouchPad/Dual Mode Pad has similar functions to a two-button mouse with a scroll wheel. For some functions, you can tap it instead of pressing a button. You can customize pointing device actions in Mouse Properties. Open the Control Panel, select the Mouse icon and press Enter to open the Mouse Properties window.

  • Page 77: Using The Fingerprint

    Operating Basics Configfree Configfree is a suite of utilities to allow easy control of communication devices and network connections. It also allows you to find communication problems and create profiles for easy switching between locations and communication networks. Windows Vista Photo Windows Vista Photo Gallery gives you many Gallery tools for your digital photos and videos.
  • Page 78 Operating Basics How the Swipe the Finger Using the following steps when swiping fingers for FingerPrint registration or authentication will help to minimize authentication failures: 1. Align the first joint of the finger to the center of the sensor. Lightly touch the sensor and swipe finger levelly towards you.
  • Page 79 Operating Basics Points to note about the FingerPrint Sensor Please be aware of the following considerations when using the FingerPrint sensor. A failure to follow these guidelines might result in damage to the sensor, sensor failure, FingerPrint recognition problems or a lower FingerPrint recognition success rate.
  • Page 80 Toshiba does not guarantee that the FingerPrint sensor will recognize the enrolled user or accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of this FingerPrint recognition software or utility.
  • Page 81 Operating Basics Points to note about the FingerPrint Utility software You are able to backup saved FingerPrint data and information within the PasswordBank by using the import or Export User Data facility under the FingerPrint management software. However, please be aware that any encrypted files cannot be backup within FileSafe using this function - in these instances it is recommended that you backup these files to external media using standard file copy processes.
  • Page 82 Operating Basics 3. At the User’s Password screen which is then displayed, you should ensure that the same Windows username is displayed before entering the appropriate password into the Enter you password field. Once this has been done, click Next. 4.
  • Page 83 ■ You must ensure that you use the TOSHIBA Password Utility to register a User Password before using the FingerPrint Power-on Security and its extended function to allow FingerPrint to be used to access the computer when it is turned on.
  • Page 84 Password and Windows Logon password before using the FingerPrint Power-on Security and this FingerPrint Single Sign On Feature. Please use TOSHIBA Password Utility to register your User/BIOS Password. If Windows Logon is not the default for your system, see Manual to register your Windows Logon password.

  • Page 85: Using The Web Camera

    TOSHIBA does not guarantee that the FingerPrint utility technology will be completely secure or error-free or it will be accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the FingerPrint software.
  • Page 86 Operating Basics Using the software The Web Camera software is pre-configured to start when you turn on Windows Vista; if you need to restart it go to Start Programs Camera Assistant Software Camera Assistant Software. APTURE STILL IMAGES ISPLAY INDOW IDEO ECORDING AMERA...

  • Page 87: Using The Internal Modem

    1. Open the Modem Region Select application. It is located on the Programs menu at TOSHIBA Networking Modem Region Select.
  • Page 88 Operating Basics Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available. If you change the Country/ Region in the Control Panel, the change may not take effect. 2. The Region Selection icon appears on the Windows Task Bar. The Region Selection icon 3.
  • Page 89 Do not pull on the cable or move the computer while the cable is connected. If you find that the modem speed is low or communication is interrupted when you are using the modem, please set the CPU speed to Maximum within the TOSHIBA Power Saver utility. Satellite P200/Satellite Pro P200 4-15...

  • Page 90: Lan

    Operating Basics Disconnecting To disconnect the internal modem cable, follow the steps below. 1. Pinch the lever on the connector in the telephone jack and pull out the connector. 2. Disconnect the cable from the computer in the same manner. The computer is equipped with networking hardware that supports Ethernet LAN (10megabits per second, 10BASE-T), Fast Ethernet LAN (100 megabits per second and Gigabit Ethernet LAN (1000BASE-T).

  • Page 91: Wireless Lan

    11a, 11b, 11g and 11n wireless are based on IEEE 802.11a, 802.11b, 802.11g and 802.11n respectively. The IEEE 802.11n specification has not been finalized and is currently in draft release. The TOSHIBA 11a/b/g/n Wireless LAN Adapters are based on the Draft Release, Version 1.0, of the IEEE 802.11n specification.
  • Page 92 Internet is an open invitation for outsiders to abuse your ISP account and privileges. 2. TOSHIBA is not liable for the eavesdropping on your data due to the use of the wireless LAN connection and any damage that may occur thereof.

  • Page 93: Using Optical Disc Drives

    The latest information regarding Operating System support, Language Support or available upgrades can be found on our web site http:// www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or www.pcsupport.toshiba.com in the United States. Wireless communication switch You can enable or disable the Wireless devices function with the on/off switch.
  • Page 94 Operating Basics If you have a CD-RW/DVD-ROM drive, refer also to the Writing CDs on CD- RW/DVD-ROM drive section for precautions on writing to CDs. If you have a DVD Super Multi drive supporting ±R Double Layer, refer also to the Writing CD/DVDs on DVD Super Multi drive supporting ±R Double Layer section for precautions on writing to CDs.
  • Page 95 Operating Basics 3. Grasp the drawer gently and pull until it is fully open. Pulling the drawer open 4. Lay the disc, label side up, in the drawer. Inserting a disc Be careful not to touch the lens or the area around it. Doing so could cause the drive to malfunction.
  • Page 96 Operating Basics Closing the drive drawer Removing optical disc media To remove the disc, follow the steps below. Do not press the eject button while the computer is accessing the disc drive. Wait for the optical disc indicator to go out before you open the drawer. Also, if the disc is spinning when you open it, wait for it to stop before you remove it.
  • Page 97 3. Change function of Buttons. Or you can go to 1. Start/All programs/TOSHIBA/Utilities and select Toshiba Assist. 2. Choose optimize from left panel then select TOSHIBA Button Controls. TOSHIBA Button Support CD/DVD play control buttons...

  • Page 98: Writing Cds On A Cd-Rw/Dvd-Rom Drive

    DVD-ROM drive may not function properly, and you may fail to write or rewrite, lose data or incur other damage. Disclaimer TOSHIBA does not bear responsibility for the following: ■ Damage to any CD-R/-RW disc that may be caused by writing or rewriting with this product.
  • Page 99 Operating Basics TOSHIBA has confirmed the operation of CD-R and CD-RW media of the manufacturers above. Operation of other media cannot be guaranteed. ■ CD-RW can generally be rewritten about 1,000 times. However, the actual number of rewrites is affected by the quality of the media and the way it is used.

  • Page 100: Writing Cds/Dvds On A Dvd Super Multi Drive Supporting Double Layer Disc Recording

    ® TOSHIBA Disc Creator/Direct Disc Writer. Ulead DVD MovieFactory TOSHIBA, which is a product of Ulead Systems, Inc. Important message Before you write or rewrite to CD-R/RW or DVD-R/-RW/+R/+RW/-RAM media, read and follow all set-up and operating instructions in this section.
  • Page 101 Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of CD-R/RW and DVD-R/+R/-RW/+RW/-RAM media. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates.
  • Page 102 Operating Basics ■ If the disc is poor in quality, dirty or damaged, writing or rewriting errors may occur. Be careful to check the disc for dirt or damage before you use it. ■ The actual number of rewrites to CD-RW or DVD-RW/+RW/-RAM is affected by the quality of the disc and the way it is used.
  • Page 103 Write from the computer's hard disk drive to the CD. Do not try to write from shared devices such as a LAN server or any other network device. ■ Writing with software other than TOSHIBA Disc Creator or Ulead DVD ® MovieFactory for TOSHIBA has not been confirmed.

  • Page 104: When Using Ulead Dvd Moviefactory® For Toshiba

    Set printable surface for underside. 2. Click Start All Programs DVD MovieFactory for TOSHIBA Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory. 3. Click Print Disc Label Label Printing. Ulead Label@Onece is started. 4. Click the General tab.
  • Page 105 Operating Basics ® How to learn more about Ulead DVD MovieFactory Please refer to the Help and Manul file for additional Ulead DVD MovieFactory information. Important information for use Note the following limitations when you write video DVD: 1. Editing digital video ■...

  • Page 106: Toshiba Disc Creator

    You cannot use the TOSHIBA Disc Creator "Audio CD" function to record music to the DVD-R/-RW or DVD+R/+RW media. ■ Do not use the "Disc Backup" function of TOSHIBA Disc Creator to copy DVD-Video and DVD-ROM with copyright protection. ■...

  • Page 107: Media Care

    Operating Basics ■ TOSHIBA Disc Creator does not support recording to DVD-RAM discs. To record to a DVD-RAM, use Explorer or other similar utility. ■ When you back up a DVD disc, be sure the source drive supports recording to DVD-R/-RW or DVD+R/+RW discs. If the source drive does not support recording to DVD-R/-RW or DVD+R/+RW discs, it might not be backed up correctly.

  • Page 108: Disks

    Operating Basics Disks 1. Store your disks in the container they came in to protect them and keep them clean. If a disk is dirty, do not use cleaning fluid. Clean it with a soft damp cloth. 2. Do not slide back the disk's protective metal covering or touch the disk's magnetic surface.

  • Page 109: Setting Up More Than One Display

    Operating Basics Setting up more than one display You can set up your computer to utilize more than one display, effectively spreading a single desktop screen across two monitors. The Display settings window allows you to adjust more precisely the relative positioning of the two displays when they are configured as an extended desktop.

  • Page 110: Cleaning The Computer

    Operating Basics Cleaning the computer To help ensure long, trouble-free operation, keep the computer free of dust and use care with liquids around the computer. ■ Be careful not to spill liquids into the computer. If the computer does get wet, turn the power off immediately and let the computer dry completely before you turn it on again.

  • Page 111: Chapter 5 The Keyboard

    Satellite P200/Satellite Pro P200 Chapter 5 The Keyboard The computer's keyboard layouts are compatible with a 104/105-key enhanced keyboard. By pressing some keys in combination, all the 104/ 105-key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/region's keyboard layout your computer is configured with.

  • Page 112: Soft Keys: Fn Key Combinations

    Soft keys: Fn key combinations The Fn (function) is unique to TOSHIBA computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features.

  • Page 113: Hotkeys

    2 key while holding down the Fn key. Before using Fn+1 and Fn+2, you must install the TOSHIBA Zooming Utility. Please be aware that this 'zooming' function is only available within Microsoft Internet Explorer, Microsoft Office, Windows Media Player and Adobe Reader, and for the icons on the desktop.

  • Page 114: Windows Special Keys

    The Keyboard Windows special keys The keyboard provides two keys that have special functions in Windows Vista. One activates the Start menu and the other has the same function as the secondary mouse button. This key activates the Windows Vista Start menu This key has the same function as the Right mouse button.

  • Page 115: Chapter 6 Power And Power-Up Modes

    Satellite P200/Satellite Pro P200 Chapter 6 Power and Power-Up Modes The computer's power resources include the AC adapter and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes.
  • Page 116 DC IN off Battery Computer goes into capacity Hibernation or shuts down exhausted (depending on the TOSHIBA Power Saver setting) No battery • No operation • LED: Battery off installed DC IN off * The LED is dependent on the model you purchased.

  • Page 117: Power Indicators

    Power and Power-Up Modes Power indicators As shown in the above table, the Battery, DC IN and Power indicators alert you to the computer's operating capability and battery charge status Battery indicator Check the Battery indicator to determine the status of the battery. The following indicator lights indicate the battery status.

  • Page 118: Battery Types

    Press <F1> to resume, <F2> to Setup. The computer's RTC battery is a lithium battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations.

  • Page 119: Care And Use Of The Battery Pack

    3. Set correct time and date. If you still see the error message after performing the above actions, please contact your TOSHIBA service representative. Care and use of the battery pack The battery pack is a vital component of portable computing. Taking proper care of it will help ensure longer operating time on battery power as well as a longer life for your battery pack.
  • Page 120 Never use the computer again until it has been checked by a TOSHIBA service provider. It might generate smoke or fire, or the battery pack might rupture.
  • Page 121 Power and Power-Up Modes 5. Charge the battery pack only in an ambient temperature between 5 and 30 degrees Celsius. Otherwise, the electrolyte solution might leak, battery pack performance might deteriorate and the battery life might be shortened. 6. Be sure to monitor the remaining battery power. If the battery pack or real time clock battery discharge completely, Sleep Mode will not function, and data in memory will be lost, and the computer might register an incorrect time and date.
  • Page 122 Power and Power-Up Modes Time The following table shows the time required to fully charge a discharged battery. Charging time (hours) Battery type Power on Power off Battery pack about 12 or longer about 4 or longer RTC battery about 24 about 24 with AC or Battery pack The charging time when the computer is on is affected by ambient...
  • Page 123 Power and Power-Up Modes Leaving the AC adapter connected will shorten battery life. At least once a week, run the computer on battery power until the battery is fully discharged, then recharge the battery. Monitoring battery capacity Remaining battery power can be monitored using the following methods. ■...

  • Page 124: Replacing The Battery Pack

    Power and Power-Up Modes Retaining data with power off (sleep mode) When you turn off your computer with fully charged batteries, the batteries retain data/charge for the following approximate time periods: Battery Approximately 1.5days(Sleep mode,9-cell) Approximately 1 days (Sleep mode,6-cell) Approximately 1 month (Shut down mode, all type of battery packs) RTC battery...
  • Page 125 Power and Power-Up Modes 5. Unlock the Battery Pack Lock. Removing the battery pack-1 6. Slide the battery pack latch to the left, then pull the battery out of the battery bay. Removing the battery pack-2 Satellite P200/Satellite Pro P200 6-11...
  • Page 126 The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. 1. Turn the computer's power off. 2. Disconnect all cables connected to the computer.

  • Page 127: Toshiba Password Utility

    Power and Power-Up Modes TOSHIBA Password Utility The TOSHIBA Supervisor Password Utility provides two levels of password security: User and Supervisor. Passwords set in TOSHIBA Supervisor Password Utility are different from ® the Windows login password. User Password To start the utility, point to or click the following items:...

  • Page 128: Power-Up Modes

    Power and Power-Up Modes To enter a password manually, follow these steps: 1. Turn on the power as described in Chapter 3, Getting Started. The following message will appear in the LCD: Enter Password [xxxxxxxx] At this point, the hotkeys Fn + F1 to F9 do not work. They will function after you enter the password.

  • Page 129: Chapter 7 Hw Setup

    Satellite P200/Satellite Pro P200 Chapter 7 HW Setup This chapter explains how to use the TOSHIBA HW Setup utility to configure your computer. TOSHIBA HW Setup lets you configure settings for various hardware devices through a number of tabs titled General, Password, Display, Boot Priority, Keyboard, CPU, LAN, and USB.
  • Page 130 HW Setup General This window displays the BIOS version and contains two buttons: Default Return all HW Setup values to the factory settings. About Display the HW Setup version. Setup This field displays BIOS Version and date. When finish BIOS update , please restart your computer and press F2 into BIOS setup manual and load BIOS default one time Password This tab allows you to set or reset the user password for power on.
  • Page 131 HW Setup Boot Priority Boot Priority Options This option sets the priority for booting the computer. Select the boot priority from the drop down list. You can override the settings and manually select a boot device by pressing one of the following keys while the computer is booting: Selects the USB floppy disk drive.
  • Page 132 HW Setup Wake-up on LAN This feature lets the computer's power be turned on when it receives a wake- up signal from the LAN. Enabled Enables Wake-up on LAN. Disabled Disables Wake-up on LAN (Default). The Wake-up LAN function support AC adapter mode only, before you plan to use this function please make sure your AC power source is connected to system properly.

  • Page 133: Chapter 8 Optional Devices

    Satellite P200/Satellite Pro P200 Chapter 8 Optional Devices Optional devices can expand the computer's capabilities and its versatility. This chapter describes connection or installation of the following types of devices, which are available from your TOSHIBA dealer: Cards/Memory ■ Express Card ■...

  • Page 134: Express Card

    Optional Devices Express Card The computer (depending on the model) is equipped with an Express Card expansion slot that can accommodate two standard module formats; an Express Card/34 module and an Express Card/54 module. An Express Card module is a small, modular add-in card technology based on PCI Express and Universal Serial Bus (USB) interfaces.

  • Page 135: Sd/Sdhc/Mmc/Ms/Ms Pro/Xd Memory Cards

    Optional Devices Removing an Express Card SD/SDHC/MMC/MS/MS Pro/xD Memory cards The computer is equipped with a multiple digital media card slot that can accommodate SD/SDHC/MMC/MS/MS Pro/xD memory cards. These memory cards let you easily transfer data from devices, such as digital cameras and Personal Digital Assistants, which use flash-memory.
  • Page 136 Optional Devices The Logo of SD memory card is The Logo of SDHC memory card is The card is designed so that it can be inserted only one way. Do not try to force the card into the slot. Memory Stick Duo/PRO Duo and the Memory Stick adaptor are not compatible with the Multiple Digital Media Card slot.
  • Page 137 Optional Devices Removing a memory card To remove a memory card, follow the steps below: 1. Click the Safely Remove Hardware icon on the Taskbar. 2. Select a device, then click the Stop button. A confirmation dialog may appear, depending on how the device is registered with the system; if so, confirm that you want to remove the device.

  • Page 138: Memory Expansion

    CAUTION: If you want to upgrade system memory, you should only use certified modules. Ask your vendor or check the TOSHIBA web site for a list of approved memory products. Insert the two memory modules of the same specifications and capacity into Slot A and Slot B respectively.
  • Page 139 Optional Devices 5. Slide your fingernail or a thin object under the cover and lift it off. Removing the memory module socket cover 6. Fit the module's connectors into the computer's connectors at about a 45 degree angle and press the module carefully to ensure a firm connection.
  • Page 140 Optional Devices 8. Seat the cover and secure it with the screw. 9. Replace the battery pack as described in Chapter 6, Power and Power- Up Modes. 10. Turn the power on and make sure the added memory is recognized. Removing Memory on Bottom Side If you use the computer for a long time, the memory modules will become hot.

  • Page 141: Additional Battery Pack

    Optional Devices Additional battery pack You can increase the portability of the computer with additional battery packs. If you're away from an AC power source and your battery runs low, you can replace it with a freshly charged battery. See Chapter 6, Power and Power-Up Modes.

  • Page 142: Television

    Optional Devices Television A television can be connected to the video out port on the computer. To connect a television, follow the steps below. 1. Turn the computer off. 2. Use a video cable (not supplied) to connect the television to the video out port.
  • Page 143 Optional Devices 3. Click the Advanced Settings button. The (Multiple Monitors) and Mobile ® Intel 945GM/943GML Express Chips Family dialogue box opens. 4. Click the Graphics Properties button. Satellite P200/Satellite Pro P200 8-11...
  • Page 144 Optional Devices 5. In the subsequent dialogue box, click Display Devices and then set up your television and notebook displays. For nVidia 1. Click Start > Control Panel > Appearance and Personalization > Personalization. 2. Choose Display Settings. 8-12 Satellite P200/Satellite Pro P200...
  • Page 145 Optional Devices 3. Click the Advanced Settings button. The Generic PnP Monitor and NVIDIA GeForce Go 7600 Properties dialogue box opens. 4. Click Start the NVIDIA Control Panel. Satellite P200/Satellite Pro P200 8-13...
  • Page 146 Optional Devices 5. Click Display item. 6. Click Change Display Configuration item. 7. Setup your television and notebook display. 8-14 Satellite P200/Satellite Pro P200...

  • Page 147: I.link (Ieee1394A)

    Optional Devices i.LINK (IEEE1394a) i.LINK (IEEE1394a) is used for high-speed data transfer for a range of compatible devices such as: ■ Digital video cameras ■ Hard disk drives ■ MO drives ■ Optical disc drives i.LINK uses a four-pin connector, which does not carry electric current. External devices will need their own power supply.

  • Page 148: Security Lock

    Optional Devices Security lock A security lock enables you to anchor your computer to a desk or other heavy object to help prevent unauthorized removal of the computer. Attach one end of a cable to the desk and the other end to the security lock slot on the right side of the computer.

  • Page 149: Chapter 9 Troubleshooting

    Satellite P200/Satellite Pro P200 Chapter 9 Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring.
  • Page 150 Troubleshooting Preliminary checklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. ■ Make sure you turn on all peripheral devices before you turn on the computer.

  • Page 151: Hardware And System Checklist

    Troubleshooting Software The problems may be caused by your software. If you cannot load a software package, the media may be damaged or the program might be corrupted. Try loading another copy of the software. If an error message appears while you are using a software package, check the software documentation.
  • Page 152 If any of the following conditions are present, the self test failed: ■ The computer stops and does not proceed to display information or messages except the TOSHIBA logo. ■ Random characters appear on the screen, and the system does not function normally.
  • Page 153 Troubleshooting Power When the computer is not plugged into an AC outlet, the battery pack is the primary power source. However, your computer has a number of other power resources, including an intelligent power supply and Real Time Clock battery. These resources are interrelated and any one could affect apparent power problems.
  • Page 154 Troubleshooting Battery If you suspect a problem with the battery, check the DC IN indicator as well as the indicators for the battery. For information on indicators and battery operation see Chapter 6, Power and Power-Up Modes. Problem Procedure Battery doesn't power The battery may be discharged.
  • Page 155 Troubleshooting Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 5, The Keyboard. Problem Procedure Some letter keys Check that the numeric keypad overlay is not produce numbers. selected. Press Fn + F10 and try typing again. Output to screen is Make sure the software you are using is not garbled.
  • Page 156 Troubleshooting Hard disk drive Problem Procedure Computer does not Insert a system disk and reboot. boot from hard drive. There may be a problem with your operating system files. Refer to your operating system documentation. Slow performance Your files may be fragmented. Run SCANDISK and defragmenter to check the condition of your files and disk.
  • Page 157 Troubleshooting Wireless LAN If the following procedures do not restore LAN access, consult your LAN administrator. For more information on wireless communication, refer to Chapter 4, Operating Basics. Problem Procedure Cannot access Wireless Make sure the computer's wireless communication switch is set to on. Use the ConfigFree program that comes pre- installed in your computer to see LAN status.
  • Page 158 Troubleshooting Sound system Problem Procedure No sound is heard Adjust the volume control dial. Check the software volume settings. If appropriate, make sure the headphone connection is secure. Check Windows Device Manager and ensure the sound function is enabled and that settings for I/O address, interrupt level and DMA are correct for your software and do not conflict with other hardware devices that you have connected to the...
  • Page 159 Troubleshooting USB mouse Problem Procedure On-screen pointer does The system might be busy. If the pointer is shaped not respond to mouse as an hourglass, wait for it to resume its normal movement shape and try again to move it. Make sure the mouse is properly connected to the USB port.
  • Page 160 Troubleshooting TV output signal Problem Procedure Display on TV is poor Make sure the TV type is correct for your area: NTSC (US) or PAL (Europe). No display Try adjusting the contrast and brightness controls on the external monitor. Press hotkeys Fn + F5 to change the display. Refer to Chapter 5, The Keyboard.
  • Page 161 Troubleshooting Memory expansion Refer also to Chapter 8, Optional Devices, for information on installing memory modules. Problem Procedure The computer hangs up Make sure the memory module installed in the and issues beep expansion slot is compatible with the computer. sounds.
  • Page 162 Troubleshooting Problem Procedure Character display In data transmission, make sure the parity bit and becomes garbled stop bit settings correspond with those of the during a communication remote computer. Check the flow control and communication protocol. You cannot receive an Check the "rings before auto answer"...
  • Page 163 Procedure Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording.
  • Page 164 DVD Super Multi drive. Cannot write correctly If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■...
  • Page 165 Troubleshooting Disk drive For information on disk care refer to Chapter 4, Operating Basics. Problem Procedure Some programs run The software or hardware configuration may be correctly, but others do causing a problem. Make sure the hardware configuration match's your software's needs. You cannot access the Try another disk.

  • Page 166: Toshiba Support

    Camera TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system, it is important to investigate other sources of assistance first.
  • Page 167 Troubleshooting Outside of Europe In Europe Australia Germany & Austria TOSHIBA (Australia) Pty, Ltd. TOSHIBA Europe (I.E.) GmbH Information Systems Division Geschäftsbereich, 84-92 Talavera Road, Deutschland-Österreich North Ryde, N.S.W. 2113 Hammfelddamm8, Sydney D-41460 Neuss, Germany Canada France TOSHIBA of Canada Ltd.
  • Page 168 Troubleshooting 9-20 Satellite P200/Satellite Pro P200...

  • Page 169: Chapter 10 Disclaimers

    For optimum performance, use your computer product only under recommended conditions. Read additional restrictions in your product documentation. Contact Toshiba technical service and support, refer to TOSHIBA support section in Chapter 9 Troubleshooting for more information. User’s Manual...

  • Page 170: Memory (Main System)

    Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power.

  • Page 171: Hdd Drive Capacity

    Disclaimers HDD Drive Capacity 1 Gigabyte (GB) means 10 = 1,000,000,000 bytes using powers of 10. The computer operating system, however, reports storage capacity using powers of 2 for the definition of 1 GB = 2 = 1,073,741,824 bytes, and therefore shows less storage capacity.

  • Page 172: Copy Protection

    Disclaimers Copy Protection Copy protection technology included in certain media may prevent or limit recording or viewing of the media. Images All images are simulated for purposes of illustration. LCD Brightness and Eye Strain Your LCD display has a brightness approaching that of a TV device. We recommend that you adjust the brightness of your LCD to a comfortable level to prevent possible strain on your eyes.

  • Page 173: Appendix A Specifications

    Satellite P200/Satellite Pro P200 Appendix A Specifications This appendix summarizes the computer's technical specifications. Dimensions 399mm (W) x 288mm (D) x 46.5mm (H. Max.) 288mm 36mm 46.5mm User’s Manual...
  • Page 174 Specifications Weight Starting at 7.2 lbs / 3.27 kg * Weight may vary depending on product configuration, vendor components, manufacturing variability and options selected. Environmental Requirements Conditions Ambient temperature Relative humidity 5°C to 35°C 20% to 80% Operating Non-operating -20°C to 65°C Conditions Altitude (from sea level) Operating...
  • Page 175 Specifications Communication Data: Protocol ITU-T-Rec V.21/V.22/V.22bis/ (Former CCITT) V.32/ V.32bis/V.34/ V.90/ V.92(only for USA and Canada) Bell 103/212A Fax: ITU-T-Rec V.17/V.29/V.27ter /V.21 (Former CCITT) Communication Data transmission and reception Speed 300/1200/2400/4800/7200/9600/12000/14400/ 16800/19200/21600/24000/26400/28800/ 31200/ 33600 bps Data reception only with V.90/V.92 28000/29333/30666/32000/33333/34666/ 36000/37333/38666/40000/41333/42666/ 44000/45333/46666/48000/49333/50666/...
  • Page 176 Specifications Satellite P200/Satellite Pro P200...
  • Page 177 Satellite P200/Satellite Pro P200 Appendix B Display Modes This appendix contains a table listing all the display modes when the display is set to an external monitor. If you are running some applications (for example a 3D application or video playback and so on), you may see some disturbance, flickering or frame dropping on your screen.
  • Page 178 Display Modes CRT Display Color Depth Refresh Rate Resolution (bit) (Hz) 2048 x 1536 16 bit 32 bit Some of display mode might not be supported depending on the external monitor which you use. Displaying movies on a TV or CRT This section describes how to set up your system to display movies simultaneously on your computer's LCD and on an external TV or CRT monitor.
  • Page 179 Display Modes For Intel 1. Click Start > Control Panel > Appearance and Personalization > Personalization. 2. Choose Display settings. Satellite P200/Satellite Pro P200...
  • Page 180 Display Modes 3. Click the Advanced Setting button. The (Multiple Monitors) and Mobile ® Intel 945GM/PM, 943GML Express Chips Family dialogue box opens. 4. Click the Graphics Properties button. Satellite P200/Satellite Pro P200...
  • Page 181 Display Modes 5. In the subsequent dialogue box, click Display Devices and then set up your television and notebook displays. For nVidia 1. Click Start > Control Panel > Appearance and Personalization > Personalization. 2. Choose Display Settings. Satellite P200/Satellite Pro P200...
  • Page 182 Display Modes 3. Click the Advanced Settings button. The Generic PnP Monitor and NVIDIA GeForce Go 7600 Properties dialogue box opens. 4. Click Start the NVIDIA Control Panel. Satellite P200/Satellite Pro P200...
  • Page 183 Display Modes 5. Click Display item. 6. Click Change Display Configuration item. 7. Setup your television and notebook display. Satellite P200/Satellite Pro P200...
  • Page 184 Display Modes Satellite P200/Satellite Pro P200...
  • Page 185 Satellite P200/Satellite Pro P200 Appendix C AC Power Cord and Connectors The power cord's AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Minimum 1.7 meters Length:...
  • Page 186 AC Power Cord and Connectors In Europe, two conductors power cord must be VDE type, H05VVH2-F or H03VVH2-F and for three conductors power cord must be VDE type, H05VV-F. For the United States and Canada, two pin plug configuration must be a 2- 15P (250V) or 1-15P (125V) and three pin plug coniguration must be 6-15P (250V) or 5-15P (125V) as designated in the U.
  • Page 187 Satellite P200/Satellite Pro P200 Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AC: alternating current AGP: accelerated graphics port BIOS: basic input output system CD-ROM: Compact Disc-Read Only Memory CD-RW: Compact Disc-Read/Write CMOS: complementary metal-oxide semiconductor CPU: central processing unit...
  • Page 188 Glossary SCSI: small computer system interface TFT: thin-film transistor USB: Universal Serial Bus VESA: Video Electronic Standards Association VGA: video graphics array WXGA+: wide extended graphics array adaptor: A device that provides an interface between two dissimilar electronic devices. For example, the AC adaptor modifies the power from a wall outlet for use by the computer.
  • Page 189 Glossary capacity: The amount of data that can be stored on a magnetic storage device such as a floppy disk or hard disk. It is usually described in terms of kilobytes (KB), where one KB = 1024 bytes and megabytes (MB), where one MB = 1024 KB.
  • Page 190 Glossary DC: Direct Current. Electric current that flows in one direction. This type of power is usually supplied by batteries. default: The parameter value automatically selected by the system when you or the program do not provide instructions. Also called a preset value.
  • Page 191 Glossary gigabyte (GB): A unit of data storage equal to 1024 megabytes. See also megabyte. graphics: Drawings, pictures, or other images, such as charts or graphs, to present information. hard disk: A non-removable disk usually referred to as drive C. The factory installs this disk and only a trained engineer can remove it for servicing.
  • Page 192 Glossary Light Emitting Diode (LED): A semiconductor device that emits light when a current is applied. Liquid Crystal Display (LCD): Liquid crystal sealed between two sheets of glass coated with transparent conducting material. The viewing- side coating is etched into character forming segments with leads that extend to the edge of the glass.
  • Page 193 Glossary parity: 1) The symmetrical relationship between two parameter values (integers) both of which are either on or off; odd or even; 0 or 1. 2) In serial communications, an error detection bit that is added to a group of data bits making the sum of the bits even or odd. Parity can be set to none, odd, or even.
  • Page 194 TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. TouchPad/Dual Mode Pad: A pointing device integrated into the TOSHIBA computer palm rest. Universal Serial Bus: This serial interface lets you communicate with several devices connected in a chain to a single port on the computer.

This manual is also suitable for:

Satellite p200 seriesSatellite p200-1jr

Table of Contents