Page 1 User’s Manual P200 Series computers.toshiba-europe.com...
Page 2 © 2007 by TOSHIBA Corporation. All rights reserved. Under copyright law, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.
Page 3: Safety Instructions
Systems, Inc. Copyright 1996, 2003 Digital Theater Systems, Inc. All Rights Reserved. Bluetooth is a registered trademark owned by its proprietor and used by TOSHIBA under license. iLINK is a trademark of Sony Corporation. Other trademarks and registered trademarks not listed above may be used in this manual.
Page 4 As you pull out the connector, keep it evenly aligned to avoid bending any connector pins. Also, before you connect a cable make sure both connectors are correctly oriented and aligned. User’s Manual P200 Series...
Page 5 Use only the battery pack that came with the computer or an optional battery pack. Use of the wrong battery could damage your computer. TOSHIBA assumes no liability for any damage in such case. EU Declaration of Conformity This product is carrying the CE-Mark in accordance with the related European Directives.
Page 6 In other countries, the drive is certified to comply with the requirement pursant to IEC 825 and EN60825 on class 1 laser product. This computer is equipped with one of the optical drive in the following list according to the model. User’s Manual P200 Series...
Page 7 To prevent direct exposure to the laser beam, do not try to open the enclosure. User’s Manual Location of the required label SERIAL NO. MANUFACTURED: COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J. CLASS 1 LASER PRODUCT LASER KLASSE 1 PIONEER CORPORATION 4-1, MEGURO 1-CHOME MEGURO-KU, TOKYO, 153-8654 P200 Series...
Page 8 TOSHIBA Samsung Storage Technology TS-L632D ■ The drive employs a laser system. To ensure proper use of this product, please read this instruction manual carefully and retain for future reference. Should the unit ever require maintenance, contact an authorized service location.
Page 9 User’s Manual Location of the required label SERIAL NO. MANUFACTURED: COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J. CLASS 1 LASER PRODUCT LASER KLASSE 1 Hitachi-LG Data Storage, Inc. 22-23, Kaigan 3-chome, Minato-ku, Yokyo, 108-0022 Japan P200 Series...
Page 10 User’s Manual Location of the required label SERIAL NO. MANUFACTURED: COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J. CLASS 1 LASER PRODUCT LASER KLASSE 1 Panasonic Communications Co., Ltd. 1-62, 4-Chome Minoshima, Hakata-Ku Fukuoka, Japan P200 Series...
Page 11 To prevent direct exposure to the laser beam, do not try to open the enclosure. User’s Manual Location of the required label SERIAL NO. MANUFACTURED: COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J. CLASS 1 LASER PRODUCT LASER KLASSE 1 TEAC CORPORATION 3-7-3 NAKA-CHO, MUSASHINO-SHI TOKYO, JAPAN P200 Series...
Page 12 To prevent direct exposure to the laser beam, do not try to open the enclosure. User’s Manual Location of the required label SERIAL NO. MANUFACTURED: COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J. CLASS 1 LASER PRODUCT LASER KLASSE 1 TOSHIBA CORPORATION 1-1-1, SHIBAURA, MINATO-KU, TOKYO 105-8001, JAPAN P200 Series...
Page 13 "AUTHORIZED service station." To prevent direct exposure to the laser beam, do not try to open the enclosure. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER'S MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. P200 Series xiii...
Page 14: Important Notice
General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer.
Page 15 Pressure or impact damage Do not apply heavy pressure to the computer or subject it to any form of strong impact as this can damage the computer's components or otherwise cause it to malfunction. User’s Manual P200 Series Getting Started,...
Page 16 Instruction Manual for Safety and Comfort All important information on the safe and proper use of this computer is described in the enclosed Instruction Manual for Safety and Comfort. Be sure to read it before using the computer. User’s Manual P200 Series...
Page 17: Table Of Contents
Special features ......... . 1-8 TOSHIBA Value Added Package ......1-9 Utilities and Applications.
Page 18 TOSHIBA Disc Creator ........4-15...
Page 19 TOSHIBA support ........
Page 20 LCD Brightness and Eye Strain......11-4 Specifications Appendix A Display Modes Appendix B AC Power Cord and Connectors Appendix C If your computer is stolen Appendix D Glossary User’s Manual P200 Series...
Page 21 This manual tells how to set up and begin using your P200 Series computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.
Page 22 DISKCOPY A: B: User’s Manual Modes, gives details on the computer's Setup, introduces you to the TOSHIBA Hardware Setup Devices, describes the optional hardware available. provide technical information about your computer. defines general computer terminology and includes a list of...
Page 23: Equipment Checklist
Carefully unpack your computer. Save the box and packing materials for future use. Check to make sure you have all the following items: Hardware ■ P200 Series Portable Personal Computer ■ Universal AC Adapter and Power Cord ■ USB Floppy Disk Drive (provided with some models) ■...
Page 24 The system may not function properly if you use drivers that are not pre- installed or distributed by TOSHIBA. SD Memory Card Format Utility and other SD functions are packaged into TOSHIBA SD Memoory Utilities. When uninstalling the SD utilities, click Start Control Panel Utilities.
Page 25: Chapter 1 P200 Series Features
This chapter identifies the computer's special features, options and accessories. Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA. Features Please visit your region's web site for the configuration details of the model that you have purchased.
Page 26 Approximately 1.5 days discharging time in Sleep Mode for the 9-cell battery, 1 day for the 6-cell battery. Discharge time in shutdown mode is approximately 1 month. * The availability of this battery is dependent on the model you purchased. P200 Series Features...
Page 27 Chapter 11. ATI Mobility. Radeon™ HD2400/HD2600 (Graphics controller chipset depends on the model purchased) The graphics controller maximizes display performance. Refer to Appendix B for more information. Disclaimers P200 Series Features Display Modes section in section in Chapter 11.
Page 28 ■ CD-DA ■ DVD-R (dual layer) ■ Photo CD (single/multi-session) ■ CD-ROM Mode1, Mode2 ■ CD-ROM XA Mode2 (Form1, Form2) ■ Enhanced CD (CD-EXTRA) P200 Series Features ■ DVD-Video ■ DVD-RW ■ DVD+RW ■ DVD+R (double layer) ■ CD-RW ■...
Page 29 Express Card/34 module and an Express Card/ 54 module. An Express Card module is a small addin card technology based on the PCI Express and Universal Serial Bus (USB) interfaces. P200 Series Features ■ DVD-ROM ■ DVD-RW ■...
Page 30 A standard 3.5 mm stereo jack is provided for the connection of external headphones or speakers. A standard 3.5 mm mini microphone jack enables connection of monaural microphone input. Record/Send still or video images with this integrated Web Camera. P200 Series Features compatible sound...
Page 31 Power-on password protection. Two level password architecture. Receives an optional security lock in order to anchor the computer to a desk or other large, heavy object. P200 Series Features...
Page 32: Special Features
Special features The following features are either unique to TOSHIBA computers or are advanced features, which make the computer more convenient to use. Hotkeys Display Automatic Power off Hard Disk Drive Automatic Power Off System Automatic Sleep/Hibernation Power-on Password Battery Save Mode...
Page 33: Toshiba Value Added Package
TOSHIBA Button Support TOSHIBA PC Diagnostic Tool TOSHIBA Flash Cards The TOSHIBA Flash Cards provide a quick way User’s Manual This feature lets you turn off the power without exiting from your software. The contents of main memory are saved to the hard disk. When you turn on the power again, you can continue working right where you left off.
Page 34: Utilities And Applications
When you start or resume your computer, the TOSHIBA Flash Cards may take a moment to become available and may display several times before completely activating. The hot key functions will be available once the TOSHIBA Cards are completely active.
Page 35 TOSHIBA ConfigFree ConfigFree is a suite of utilities to allow easy TOSHIBA Disc Creator TOSHIBA Hardware Setup CD/DVD Drive Acoustic Silencer Ulead DVD MovieFactory TOSHIBA The availability of Labelflash™ function depends on the model you purchased. User’s Manual control of communication devices and network connections.
Page 36: Options
Lock button at the bottom of the right pane in the start menu. ■ TOSHIBA Assist: This can be used to open TOSHIBA Assist if it is already installed in your computer. Two memory module can be installed in this computer.
Page 37: Chapter 2 The Grand Tour
The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Certain types of notebook chassis are designed to accommodate all possible configurations for an entire product series. Your selected model may not have all the features and specifications corresponding to all of the icons or switches shown on the notebook chassis, unless you have selected all those features.
Page 38 Front Edge Logo* DC IN LED Power LED Battery LED Hard Disk Drive LED Multiple Digital Media Card Slot Access LED* Wireless Communication Switch and LED* Line In Jack Microphone Jack S/PDIF Jack User’s Manual Front Edge Logo indicates the computer series you bought.
Page 39: Right Side
Headphone Jack Volume Control Multiple Digital Media Card Slot* Right side The following figure shows the computer's right side. Universal Serial Bus (USB) Port Modem Jack Optical Disc Drive and LED * The availability of this feature is dependent on the model you purchased. Universal Serial Bus (USB) Port Modem Jack...
Page 40: Left Side
Optical Disc Drive and Fan Vents* To prevent possible over heating of the GPU, never block the fan vents. Security Lock Left side The following figure shows the computer's left side. DC IN 19V Jack RGB Monitor Port Fan Vents Lan Jack Universal Serial Bus (USB) Port * The availability of this feature is dependent on the model you purchased.
Page 41: Back Side
To prevent possible over heating of the CPU, never block the fan vents. LAN Jack Universal Serial Bus (USB) Port TV Out Port HDMI Port i.LINK (IEEE1394a) Port Express Card Slot Back side The following figure shows the computer's back side. User’s Manual This jack lets you connect to a LAN.
Page 42: Underside
Underside The following figure shows the underside of the computer. Make sure the display is closed before turning over your computer. Battery Pack Fan Vent Battery Pack Lock Subwoofer HDD1 * The availability of this feature is dependent on the model you purchased. Battery Pack Fan VentS Battery Pack Lock...
Page 43: Front With The Display Open
Expansion Memory Socket To prevent possible overheating of the CPU, never block the fan vents. Battery Pack Latch Front with the display open The following figure shows the front of the computer with the display open. To open the display, slide the latch on the front of the display and lift it up. Position the display at a comfortable viewing angle.
Page 44 Display Screen To prolong the life of your display screen, use a screen saver when you're not using the computer and it is idle. Left and Right Speakers TouchPad TouchPad Control Buttons Power Button Internet Button* CD/DVD Button* Play/Pause Button* Stop* User’s Manual The LCD displays high-contrast text and graphics...
Page 45: Keyboard Indicators
Previous Button* Next Button* If Random or Shuffle is selected in Windows or Previous advances to a random selection. Number Pad Web Camera* Microphone* Keyboard Indicators Numeric Mode Caps Lock CAPS LOCK User’s Manual Skips backwards to the previous track, chapter or digital file.
Page 46: Optical Disc Drive
Code Writable discs This section describes the types of writable discs. Check the specifications for your drive to for the type of discs it can write. Use TOSHIBA Disc Creator to write compact discs. Refer to Chapter 4, ■ CD-R discs can be written only once. The recorded data cannot be erased or changed.
Page 47 DVD Super Multi drive supporting ±R Double Layer The full-size DVD Super Multi drive supporting ±R Double Layer module lets you record data to rewritable discs as well as run either 12 cm (4.72") or 8 cm (3.15") discs without using an adapter. The read speed is slower at the centre of a disc and faster at the outer edge.
Page 48 To recharge the battery, simply connect the AC adapter to a power source and the computer. See Chapter 7, Use of the wrong adapter could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 19 volts DC.
Page 49: Chapter 3 Getting Started
AC adapter to charge the battery pack, refer to Chapter 7, Power-Up Modes. Use of the wrong adapter could damage your computer. TOSHIBA assumes no liability for any damage in such case. The output rating for the computer is 19 volts DC.
Page 50 1. Connect the power cord to the AC adapter. 2. Connect the DC output plug on the AC adapter to the DC IN input port on the back of the computer. 3. Plug the power cord into a live wall outlet. The Battery and DC IN indicators on the front of the computer should glow.
Page 51: Opening The Display
Opening the display The display panel can be rotated in a wide range of angles for optimal viewing. 1. Slide the display latch on the front of the computer. 2. Lift the panel up and adjust it to the best viewing angle for you. Use reasonable care when opening and closing the display panel.
Page 52: Starting Up For The First Time
Starting up for the first time When you first turn on the power, the computer's initial screen is the ® Windows Vista Startup Screen Logo. Follow the on-screen directions for each screen. During setup, you can click the Back button to return to the previous screen.
Page 53 ■ When the AC adaptor is connected, the computer will go into Sleep Mode according to the settings in the Power Options. ■ To restore the operation from the computer from Sleep Mode, press the power button or press any key. Please be aware that this latter action only works on the internal keyboard if the.
Page 54 3. Press the power button. Please note that this feature must be enabled - please refer to the Power Options (to access it, click Start Control Panel Choose what the power button do). When you turn the power back on, you can continue where you left when you shutdown the computer.
Page 55 Starting Hibernation Mode You can also enable Hibernation Mode by pressing Fn + F4 - please refer to Chapter 6, To enter Hibernation Mode, follow the steps below. 1. Click Start. 2. Click the arrow button ( 3. Select Hibernate from the menu. Automatic Hibernation Mode The computer can be configured to enter Hibernate Mode automatically when you press the power button or close the lid.
Page 56: Restarting The Computer
Restarting the computer Certain conditions require that you reset the computer, for example if: ■ You change certain computer settings. ■ An errors and the computer does not respond you your keyboard commands. If you need to restart the computer, there are three ways this can be achieved: 1.
Page 57: Restoring The Pre-Installed Software From The Product
2. Switch on the computer and, when the In Touch with Tomorrow TOSHIBA prompt appears, press the F12 key to display the Boot Menu. For 2HDD Model, If HDD1 is first, go to step 3. If HDD1 is not first, do as follows: ■...
Page 58: Chapter 4 Operating Basics
Operating Basics This chapter gives information on basic operations including using the TouchPad, optical disc drives, the internal modem, LAN and wireless LAN. It also provides tips on caring for your computer and on heat dispersal. Using the TouchPad To use the TouchPad, simply move your finger tip across it in the direction you want the on-screen pointer to go.
Page 59: Using The Web Camera
You can customize pointing device actions in Mouse Properties. Open the Control Panel, select the Mouse icon and press Enter to open the Mouse Properties window. Click: Double-click: Click the left control button twice or tap the TouchPad twice. Scroll Using the Web Camera This section describes the bundled Web Camera utility, which can Snapshot and video images.
Page 60 Using the software The Web Camera software is pre-configured to start when you turn on Windows Vista; if you need to restart it go to Start Assistant Software Capture still images Video Recording Audio Recording Function Snapshot Video Recording Audio Recording Functions About Player...
Page 61: Using The Internal Modem
Settings Help Using the internal modem This section describes how to setup the modem and use it to connect to other computer systems. Refer to the computer's online help files and the online help files for your modem software, for more information. The internal modem does not support the voice functions described in the help files.
Page 62: Region Selection
1. Open the Modem Region Select application. It is located on the Programs menu at TOSHIBA Select. Do not use the Country/Region Select function in the Modem setup utility in the Control Panel if the function is available.
Page 63 Settings You can enable or disable the following settings: AutoRun Mode Region Select Utility starts automatically when you start up the operating system. Open the Dialling Properties dialogue box after selecting region The dialling properties dialogue box will be displayed automatically after you select the region.
Page 64: Lan
If you find that the modem speed is low or communication is interrupted when you are using the modem, please set the CPU speed to Maximum within the TOSHIBA Power Saver utility. Disconnecting To disconnect the internal modem cable, follow the steps below.
Page 65: Wireless Lan
To connect the LAN cable, follow the steps below. 1. Turn off the power to the computer and to all external devices connected to the computer. 2. Plug one end of the cable into the LAN jack. Press gently until you hear the latch click into place.
Page 66 Internet is an open invitation for outsiders to abuse your ISP account and privileges. 2. TOSHIBA is not liable for the eavesdropping on your data due to the use of the wireless LAN connection and any damage that may occur thereof.
Page 67: Product Support
Please refer also to the electronic information which is included with each software. This Bluetooth specification. TOSHIBA cannot confirm compatibility between any PC products and/or other electronic devices that use Bluetooth™ other than TOSHIBA mobile PCs. Release Notes related to the Bluetooth ®...
Page 68: Using Optical Disc Drives
Wireless communication LED The LED indicates the status of the wireless communication functions. LED status LED off LED glows Using optical disc drives The illustrations in this section might differ slightly from your drive, but operation is the same for all optical disc drives. The full-size drive provides high-performance execution of disc-based programs.
Page 69 Operating Basics Manual release with the eject hole 3. Grasp the drawer gently and pull until it is fully open. Pulling the drawer open 4. Lay the disc, label side up, in the drawer. Inserting a disc User’s Manual 4-12...
Page 70 Be careful not to touch the lens or the area around it. Doing so could cause the drive to malfunction. 5. Press gently at the centre of the disc until you feel it click into place. The disc should lie below the top of the spindle, flush with its base. 6.
Page 71 2. "Button Support" white card fully appears. After double click this card, the dialog for changing button function is displayed. 3. Change function of Buttons. Or you can go to: 1. Start 2. Choose optimize from left panel then select TOSHIBA Button Controls. User’s Manual Removing a disc...
Page 72: Toshiba Disc Creator
TOSHIBA Disc Creator cannot record in packet format. ■ You might not be able to use the "Disc Backup" function of TOSHIBA Disc Creator to backup a DVD-R/-RW or DVD+R/+RW disc that was made with other software on a different DVD-R/-RW or DVD+R/+RW recorder.
Page 73: Media Care
■ When you back up a DVD-R, DVD-RW, DVD+R or DVD+RW, be sure to use the same type of disc. ■ You cannot partially delete any data written to a CD-RW, DVD-RW or DVD+RW disc. Data Verification To verify that data is written or rewritten correctly, follow the steps below before you write or rewrite a Data CD/DVD.
Page 74: Discs
Discs 1. Store your disks in the container they came in to protect them and keep them clean. If a disk is dirty, do not use cleaning fluid. Clean it with a soft damp cloth. 2. Do not slide back the disk's protective metal covering or touch the disk's magnetic surface.
Page 75: Cleaning The Computer
If an external display will not be connected next time you use your computer, you should cancel any extended desktop or clone display settings before shutting down your computer. Clone display settings are those where more than one device has been selected and is simultaneously applicable.
Page 76: Moving The Computer
Moving the computer The computer is designed for rugged durability. However, a few simple precautions taken when moving the computer will help ensure trouble-free operation. ■ Make sure all disk activity has ended before moving the computer. Check the Built-in Hard Disk Drive and optical disc drive indicators on the computer.
Page 77: Chapter 5 About The Hd Dvd
About the HD DVD This chapter describes the features, use of HD DVD and HD DVD Media. HD DVD is provided with some models. Summary HD DVD allows users to enjoy video, concerts and other packaged content by taking advantage of its large amount of storage space and high-quality audio and video.
Page 78 ■ HD DVD is a new standard which makes use of new technologies. As such, there is a possibility of problems occurring related to connection, compatibility or operation with some discs and other digital devices. The HD DVD-ROM logo signifies that this drive complies with the HD DVD physical standard, and does not signify compliance with the HD DVD Video standard.
Page 79: Using Toshiba Hd Dvd Player To Enjoy Hd Dvds
HD DVD Playback Restrictions HD DVD-ROM drive and HD DVD-R drive allow users to enjoy the strong visuals of HD DVD-Video. "TOSHIBA HD DVD PLAYER" software is provided for playback of HD DVD-Video. Important information on use HD DVD Playback ■...
Page 80 HD DVD Video playback. ■ HD DVD Video playback may take several moments to begin. ■ When playing an HD DVD (Twin format disc), run it from the "TOSHIBA HD DVD Launcher Menu". When Using ■...
Page 81 Display Devices & Audio ■ "TOSHIBA HD DVD PLAYER" will only run when "Colors" is set to "Highest (32 bit)". The "Colors" setting can be adjusted on the "Monitor" tab in the "Display Settings". To open the Display Settings, click Start...
Page 82 Print Screen functions are disabled even when running other applications besides "TOSHIBA HD DVD PLAYER" and when "TOSHIBA HD DVD PLAYER" is minimized. Please close the "TOSHIBA HD DVD PLAYER" to use the Print Screen function. ■ Carry out the installation/uninstallation of the "TOSHIBA HD DVD PLAYER"...
Page 83: Using Toshiba Hd Dvd Player
2. Touch the CD/DVD panel on the Front operation panel. Or select Start All Programs "TOSHIBA HD DVD PLAYER". The TOSHIBA DVD PLAYER can also be started from the Media Center top menu. User’s Manual Application selection screen TOSHIBA HD DVD PLAYER to start...
Page 84: Operating Toshiba Hd Dvd Player
Operating TOSHIBA HD DVD PLAYER Important information on using "TOSHIBA HD DVD PLAYER". ■ The HD DVD standard defines A, B, C and D buttons, and some software may display "Press the A button" or similar messages. If a message of this type appears, use the following corresponding keyboard keys.
Page 85 DVD PLAYER Control window Open TOSHIBA HD DVD PLAYER HELP TOSHIBA HD DVD PLAYER features and instructions are also explained in detail in "TOSHIBA HD DVD PLAYER Help". Use the following procedure to open "TOSHIBA HD DVD PLAYER Help". 1. Click the "Help" button ( TOSHIBA HD DVD PLAYER Control window The following are the main buttons used when playing HD DVD-Video.
Page 86 DVD-VR only. One-touch Replay Fast Rewind Play Fast Forward TOSHIBA HD DVD PLAYER Control window (2) Opens the disc tray. Jumps to the previous chapter. Jumps to the next chapter. Rewinds by a specified amount of time and continues playback from that position.
Page 87 Rewind Sound Angle Rewind Title/Chapter Drive Specification Search TOSHIBA HD DVD PLAYER Control window (3) Switches between available subtitles. Switches between audio tracks for titles which have more than 1 audio track. Switches between angles for multi-angle compatible titles. Switches between repeat chapter, repeat title and normal playback modes.
Page 88: Using The Computer In Place Of An Hd Dvd Player
Using the Computer in place of an HD DVD Player Videos played using "TOSHIBA HD DVD PLAYER" included with the computer can be displayed on a television equipped with an HDMI input port. HD DVD-Video can only be displayed on the computer's display panel or on a television connected to the HDMI out port.
Page 89: Hd Dvd-R Disc Writing Software (Depending On The Model You Purchased)
HD DVD-R discs. Ulead DVD MovieFactory can be used to write files in video format. TOSHIBA Disc Creator can be used to write data. Refer to the manuals or help files included with the software for detailed usage instructions.
Page 90: Writing Cds/Dvds On A Dvd Super Multi Drive Or Hd Dvd-Rom Drive Supporting Double Layer Disc Recording
The following is an HD DVD-Video display compatibility list. ■ O: The display of TOSHIBA HD DVD PLAYER is possible. ■ X: The display of TOSHIBA HD DVD PLAYER is impossible. Computer's Display Panel...
Page 91 Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of CD-R/RW and DVD-R/+R/-RW/+RW/-RAM media. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates.
Page 92 DVD-R (Dual Layer) DVD-R Labelflash™ DVD+R Labelflash™ ■ If the disc is poor in quality, dirty or damaged, writing or rewriting errors may occur. Be careful to check the disc for dirt or damage before you use it. ■ The actual number of rewrites to CD-RW or DVD-RW/+RW/-RAM is affected by the quality of the disc and the way it is used.
Page 93 Write from the computer's hard disk drive to the CD. Do not try to write from shared devices such as a LAN server or any other network device. ■ Writing with software other than TOSHIBA Disc Creator or Ulead DVD MovieFactory operation with other software cannot be guaranteed.
Page 94: Writing Cds/Dvds/Hd Dvds On A Hd Dvd-R Drive (Depending On The Model You Purchased)
Simplified steps for making a Labelflash™ DVD: 1. Insert a Labelflash™ disc in DVD drive. Set printable surface for underside. 2. Click Start Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory. 3. Click Print Disc Label started. 4. Click the General tab.
Page 95 Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of CD-R/RW, DVD-R/+R/-RW/+RW/-RAM and HD DVD-R media. However, in no event does TOSHIBA guarantee the operation, quality or performance of any disc. Disc quality can affect write or rewrite success rates.
Page 96 DVD-R (Dual Layer) HD DVD-R (Single Layer) HD DVD-R (Dual Layer) ■ If the disc is poor in quality, dirty or damaged, writing or rewriting errors may occur. Be careful to check the disc for dirt or damage before you use it.
Page 97 Write from the computer's hard disk drive to the CD. Do not try to write from shared devices such as a LAN server or any other network device. ■ Writing with software other than TOSHIBA Disc Creator or Ulead DVD MovieFactory operation with other software cannot be guaranteed.
Page 98: When Using Ulead Dvd Moviefactory® For Toshiba
How to make a DVD-Video Simplified steps for making a DVD-Video from video data captured from a DV-Camcorder: 1. Click Start Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory. 2. Insert a DVD-RW or DVD+RW disc in Burner. 3. Click Video Disc dialog box, choose DVD-Video/+VR to invoke Straight Capture to Disc Page.
Page 99 ■ Do not enter Sleep/Hibernation Mode while using DVD MovieFactory. ■ Do not operate DVD MovieFactory immediately after turning on the computer. Please wait until all Disc Drive activity has stopped. ■ When recording to a DV-Camcorder, to ensure you capture all of your data, let the camcorder record for a few seconds before you begin recording your actual data.
Page 100: Chapter 6 The Keyboard
The Keyboard The computer's keyboard layouts are compatible with a 104/105-key enhanced keyboard. By pressing some keys in combination, all the 104/105-key keyboard functions can be executed on the computer. The number of keys on your keyboard depends on which country/region's keyboard layout your computer is configured with.
Page 101: F1 ... F12 Function Keys
Soft keys: Fn key combinations The Fn (function) is unique to TOSHIBA computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features.
Page 102: Hotkeys
Fn + 1 Fn + 2 Before using Fn + 1 and Fn + 2, you must install the TOSHIBA Zooming Utility. Please be aware that this 'zooming' function is only available within Microsoft Internet Explorer, Microsoft Office, Windows Media Player and Adobe Reader, and for the icons on the desktop.
Page 103: Windows Special Keys
Windows special keys The keyboard provides two keys that have special functions in Windows Vista. One activates the Start menu and the other has the same function as the secondary mouse button. This key activates the Windows Vista™ Start menu This key has the same function as the Right mouse button.
Page 104: Chapter 7 Power And Power-Up Modes
Power and Power-Up Modes The computer's power resources include the AC adapter and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power up modes. Power conditions The computer's operating capability and battery charge status are affected by the power conditions: whether an AC adapter is connected, whether a...
Page 105: Power Indicators
• LED: Battery flashes Amber DC IN off Computer goes into Hibernation or shuts down (depending on the TOSHIBA Power Saver setting) • No operation • LED: Battery off DC IN off The battery charge is low. The AC adapter must...
Page 106: Battery Types
DC IN indicator Check the DC IN indicator to determine the power status with the AC adapter connected: Blue No light Power indicator Check the Power indicator to determine the power status with the AC adapter connected: Blue Blinking Amber No light Battery types The computer has two types of batteries:...
Page 107: Care And Use Of The Battery Pack
Press <F1> to resume, <F2> to Setup. The computer's RTC battery is a lithium battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of.
Page 108: Safety Precautions
Safety precautions Mishandling of batteries can cause death, serious injury or property damage. Carefully observe the following advice: Danger: Indicates an imminently hazardous situation, which could result in death or serious injury, if you do not follow instructions. Warning: Indicates a potentially hazardous situation, which could result in death or serious injury, if you do not follow instructions.
Page 109 Never use the computer again until it has been checked by a TOSHIBA service provider. It might generate smoke or fire, or the battery pack might rupture. 3. Make sure the battery is securely installed in the computer before attempting to charge the battery pack.
Page 110: Charging The Batteries
Note 1. Never remove the battery pack while the Wake-up on LAN function is enabled. Data will be lost. Before you remove a battery pack, disable the Wake-up on LAN function. 2. To ensure the battery pack maintains maximum capacity, operate the computer on battery power once a week until the battery pack is fully discharged.
Page 111 The charging time when the computer is on is affected by ambient temperature, the temperature of the computer and how you use the computer. If you make heavy use of external devices the battery might scarcely charge at all during operation. Refer also to the section Maximizing battery operating time.
Page 112 Monitoring battery capacity Remaining battery power can be monitored using the following methods. ■ Clicking the battery icon on the task bar ■ Via the Battery Stats in the Windows Mobility Center Window ■ You should wait at least 16 seconds after turning on the computer before trying to monitor the remaining operating time.
Page 113: Replacing The Battery Pack
Retaining data with power off (sleep mode) When you turn off your computer with fully charged batteries, the batteries retain data/charge for the following approximate time periods: Battery RTC battery * The availability of this battery is dependent on the model you purchased. Extending battery life To maximize the life of your battery pack: ■...
Page 114 The battery pack is a lithium ion battery, which can explode if not properly replaced, used, handled or disposed of. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. 1. Turn the computer's power off. 2. Disconnect all cables connected to the computer.
Page 115: Toshiba Password Utility
4. Gently slide the battery into the battery bay until the latch clicks into place. TOSHIBA Password Utility The TOSHIBA Supervisor Password Utility provides two levels of password security: User and Supervisor. Passwords set in TOSHIBA Supervisor Password Utility are different from...
Page 116: Power-Up Modes
Supervisor password If you set a supervisor password, some functions will be restricted when a user logs on with the user password. To set a supervisor password: TOSHIBA Assist This utility lets you do the following: ■ Register or delete the supervisor password.
Page 117: Panel Power Off/On
This feature automatically turns off the system in Sleep or Hibernation mode if the computer is not used for a set duration. Refer to Special explanation of how to set the duration. User’s Manual features, in Chapter 1, P200 Series Features Power and Power-Up Modes for an 7-14...
Page 118: Chapter 8 Hw Setup
HW Setup This chapter explains how to use the TOSHIBA HW Setup utility to configure your computer. TOSHIBA HW Setup lets you configure settings for various hardware devices through a number of tabs titled General, Password, Display, Boot Priority, Keyboard, CPU, LAN, and USB.
Page 119 Password This tab allows you to set or reset the user password for power on. Display This tab lets you customize your computer's display settings for either the internal LCD screen or for an external monitor. Power On Display This option allows you to select the display to be used when the computer is switched on.
Page 120 Boot Priority Boot Priority Options This option sets the priority for booting the computer. Select the boot priority from the drop down list. You can override the settings and manually select a boot device by pressing one of the following keys while the computer is booting: To select the boot drive you want, follow the steps below.
Page 121 Wake-up on LAN This feature lets the computer's power be turned on when it receives a wake-up signal from the LAN. Enabled Disabled The Wake-up LAN function is not supported on battery power in Hibernate/ Power off mode, before you plan to use this function please make sure your AC power source is properly connected to the system.
Page 122: Chapter 9 Optional Devices
Optional Devices Optional devices can expand the computer's capabilities and its versatility. This chapter describes connection or installation of the following types of devices, which are available from your TOSHIBA dealer: Cards/Memory ■ Express Card ■ SD (Secure Digital) / SDHC(Secure Digital High Capacity) / MMC...
Page 123 Installing an Express Card One Express Card connector is located on the right side of the computer. The computer's hot-install feature lets you install Express Card while the computer's power is on. To install an Express Card, follow the steps below. 1.
Page 124: Sd/Sdhc/Mmc/Ms/Ms Pro/Xd Memory Cards
SD/SDHC/MMC/MS/MS Pro/xD Memory cards The computer is equipped with a multiple digital media card slot that can accommodate SD/SDHC/MMC/MS/MS Pro/xD memory cards. These memory cards let you easily transfer data from devices, such as digital cameras and Personal Digital Assistants, which use flash-memory. Card Type SDHC MS Pro...
Page 125 Installing a memory card To install a memory card: 1. Insert the memory card. 2. Press gently to ensure a firm connection. Make sure the memory card is oriented properly before you insert it. ® If Windows The multiple digital media card slot only accepts one type of card at a time. Do not attempt to install more than one card as you risk damaging either the cards themselves or the computer.
Page 126: Memory Expansion
In this case the computer will issue a warning. CAUTION: If you want to upgrade system memory, you should only use certified modules. Ask your vendor or check the TOSHIBA web site for a list of approved memory products. User’s Manual...
Page 127 Insert the two memory modules of the same specifications and capacity into Slot A (Upper) and Slot B (Bottom) respectively. The computer will operate in dual channel mode. You can access the inserted memory modules efficiently in dual channel. Point to note about Memory Module Error If you install a memory module that is not compatible with the computer, the Power indicator will flashes (on for 0.5 seconds, off for 0.5 seconds) in the following ways:...
Page 128 5. Slide your fingernail or a thin object under the cover and lift it off. 6. Fit the module's connectors into the computer's connectors at about a 45 degree angle and press the module carefully to ensure a firm connection. Do not touch the connectors on the memory module or on the computer.
Page 129 9. Replace the battery pack as described in Chapter 7, Modes. 10. Turn the power on and make sure the added memory is recognized. Removing Memory on Bottom Side The Slot A is reserved for main memory, the upper slot. Use the slot B for expanded memory, the bottom slot.
Page 130: Additional Battery Pack
6. Seat the cover and secure its screw. 7. Replace the battery. Additional battery pack You can increase the portability of the computer with additional battery packs. If you're away from an AC power source and your battery runs low, you can replace it with a freshly charged battery.
Page 131: Television
When you turn on the power, the computer automatically recognizes the monitor. To change the display settings, press Fn + F5. If you disconnect the monitor before you turn the computer off, be sure to press Fn + F5 to switch to the internal display.
Page 132: Hdmi
5. Select CCC. 6. In Catalyst Control Center window, setup your television or CRT and Notebook displays. * The availability of this feature is dependent on the model you purchased. HDMI A HDMI monitor can be connected to the HDMI out put on the computer. To connect monitor, follow the steps as detailed below: As the port operation of all HDMI (High-Definition Multimedia Interface) monitors has not be confirmed, some HDMI monitors may not function...
Page 133 6. Click Desktop Area and Refresh Rate to select the one of below format which is supported on this platform. Country/Region * Lists the actual Signal Formats supported by the HDMI monitor you are using. 7. Click Apply button. Above operation is the way to select Desktop Area and Refresh Rate format directly.
Page 134 Settings for audio on HDMI To set the audio device to use the HDMI, follow the steps below. 1. Go to Start then select Control Panel. 2. Click Hardware and Sound then select Sound. If you are in control panel classic view, select Sound directly. 3.
Page 135: Remote Controller
Remote Controller Pause Record Play Rewind Replay Back Arrows Volume + Volume - Guide Recorded TV Clear Teletext Green User’s Manual Access indictor Power Stop Fast Forward Skip Start More Info Mute Channel/Page Live TV DVD Menu Numbers Enter Blue Yellow Remote Cotroller Optional Devices...
Page 136 Power Access indicator Record Stop Pause Play REW (Rewind) FWD (Fast Foward) Replay Skip Back More Info Arrows Volume + User’s Manual Starts or terminates the operating system. This button functions like the Power button of your computer. By default, the Sleep Mode is equivalent to the Power Off state of your computer.
Page 137: Using The Remote Controller
Volume - Start Channel/Page up (+) and down (-) Mute Recorded TV Guide Live TV DVD Menu Numbers Clear Enter Red, Green, Yellow and Blue buttons Teletext Using the Remote Controller This computer includes a remote control unit, which allows you to control some of your computers from distant location.
Page 138 Operational range of the Remote Controller Point the Remote controller at your computer and press a button. The operational angle and distance are described below. Distance Angle 30 degrees 15 degrees (vertically) Remote Controller * The appearance of the provided Remote Controller may vary from model to model.
Page 139: Installing/Removing Batteries
Installing/Removing batteries Be sure to install the dry batteries provided with this product using the Remote Controller. The procedures for installing and removing the bateries vary depending on the type of the Remote Controller. Check the type and then install or remove the bateries as instructed.
Page 140: Installing The Batteries
Type of battery that can be used for the Remote Controller When batteries shipped with the Remote Controller are discharged, replace them with commercially available AA manganese batteries or AA alkaline batteries. Other types or battery should not be used. Installing the batteries 1.
Page 141: Replacing The Batteries
Battery cover Replacing the batteries When the batteries in ther Remote Controller reach the end of their life, the Remote Controller may not operate correctly or work only within a short distance from your computer. In this instance, you should purchase new batteries and replace the discharged ones.
Page 142: I.link (Ieee1394A)
i.LINK (IEEE1394a) i.LINK (IEEE1394a) is used for high-speed data transfer for a range of compatible devices such as: ■ Digital video cameras ■ Hard disk drives ■ MO drives ■ Optical disc drives i.LINK uses a four-pin connector, which does not carry electric current. External devices will need their own power supply.
Page 143: Security Lock
Disconnecting 1. Click the Safely Remove Hardware icon on the Task Bar. 2. Point to i.LINK (IEEE1394a) device and click. 3. Disconnect the cable from the computer then from the i.LINK device. Refer also to the documentation that came with your i.LINK device. Security lock A security lock enables you to anchor your computer to a desk or other heavy object to help prevent unauthorized removal of the computer.
Page 144: Troubleshooting
Troubleshooting TOSHIBA designed the computer for durability. However, should problems occur, following the procedures in this chapter can help to determine the cause. All readers should become familiar with this chapter. Knowing what might go wrong can help prevent problems from occurring.
Page 145: Analyzing The Problem
Preliminary checklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. ■ Make sure you turn on all peripheral devices before you turn on the computer.
Page 146: Hardware And System Checklist
Record your observations so you can describe them to your dealer. Software Hardware Hardware and system checklist This section discusses problems caused by your computer’s hardware or attached peripherals. Basic problems may occur in the following areas: ■ System start-up ■...
Page 147: Self Test
If any of the following conditions are present, the self test failed: ■ The computer stops and does not proceed to display information or messages except the TOSHIBA logo. ■ Random characters appear on the screen, and the system does not function normally.
Page 148: Overheating Power Down
Power When the computer is not plugged into an AC outlet, the battery pack is the primary power source. However, your computer has a number of other power resources, including an intelligent power supply and Real Time Clock battery. These resources are interrelated and any one could affect apparent power problems.
Page 149 Battery If you suspect a problem with the battery, check the DC IN indicator as well as the indicators for the battery. For information on indicators and battery operation see Chapter 7, Problem Battery doesn't power the computer. Battery doesn't charge when the AC power cord is attached.
Page 150: Lcd Panel
Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 6, Problem Output to screen is garbled. LCD panel Problem Lines appear broken. No display. Problems above remain unresolved or other problems occur. Hard disk drive Problem Computer does not boot from hard drive.
Page 151 Password Problem Cannot enter password Refer to Chapter 7, i.LINK (IEEE1394) Problem i.LINK device does not function Wireless LAN If the following procedures do not restore LAN access, consult your LAN administrator. For more information on wireless communication, refer to Chapter 4, Operating Problem...
Page 152: Sound System
Problem No display Display error occurs Monitor goes into panning mode Sound system Problem No sound is heard Pointing device If you are using a USB mouse, also refer to the and to your mouse documentation. TouchPad Problem On-screen pointer does not respond to Pad operation User’s Manual...
Page 153: Usb Mouse
Problem Double-tapping does not work The mouse pointer moves too fast or too slow USB mouse Problem On-screen pointer does not respond to mouse movement Double-clicking does not work The mouse pointer moves too fast or too slow The mouse pointer moves erratically User’s Manual Procedure...
Page 154 Refer also to your USB device’s documentation. Problem USB device does not work TV output signal Problem Display on TV is poor No display If you turn the computer off in Sleep Mode while the display is on a TV, the computer will select either the internal LCD or an external computer CRT as the display device the next time it is switched on.
Page 155 Sleep/Hibernation Problem The system will not enter Sleep/Hibernation Memory expansion Refer also to Chapter 9, memory modules. Problem The computer hangs up and issues beep sounds. (A long beep, three short beeps, three short beeps, and then a long beep.) Modem Problem Communication...
Page 156 Problem After making a call you can't hear a ring Communication is cut off unexpectedly CONNECT quickly replaced by CARRIER Character display becomes garbled during a communication You cannot receive an incoming call DVD Super Multi drive supporting double layer disc recording For more information, refer to Chapter 5, Problem You cannot access a...
Page 157 Check the region code on the DVD. It must match that on the DVD Super Multi drive. If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■...
Page 158 HD DVD-R or HD DVD-ROM drive supporting disc recording For more information, refer to Chapter 5, Problem You cannot access a CD/DVD/HD DVD in the drive Some CD/DVD/ HD DVDs run correctly, but others do not User’s Manual About the HD Procedure Make sure the drive's drawer is securely closed.
Page 159 User’s Manual Procedure If you have trouble writing, make sure you are observing the following precautions: ■ Use only media recommended by TOSHIBA. ■ Do not use the mouse or keyboard during writing. ■ Use only the software supplied with the computer for recording.
Page 160: Toshiba Support
Camera TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system, it is important to investigate other sources of assistance first.
Page 161: Disclaimers
Disclaimers This chapter states the Disclaimer(s) information applicable to TOSHIBA computers. Central Processing Unit ("CPU") Performance Disclaimer. CPU performance in your computer product may vary from specifications under the following conditions: ■ use of certain external peripheral products ■ use of battery power instead of AC power ■...
Page 162: Memory (Main System)
Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power.
Page 163: Hdd Drive Capacity
HDD Drive Capacity 1 Gigabyte (GB) means 10 The computer operating system, however, reports storage capacity using powers of 2 for the definition of 1 GB = 2 therefore shows less storage capacity. Available storage capacity will also be less if the product includes one or more pre-installed operating systems, such as Microsoft Operating System and/or pre-installed software applications, or media content.
Page 164: Copy Protection
Copy Protection Copy protection technology included in certain media may prevent or limit recording or viewing of the media. Images All images are simulated for purposes of illustration. LCD Brightness and Eye Strain Your LCD display has a brightness approaching that of a TV device. We recommend that you adjust the brightness of your LCD to a comfortable level to prevent possible strain on your eyes.
Page 165: Specifications
Specifications This appendix summarizes the computer's technical specifications. Dimensions 399 mm (W) × 288 mm (D) × 46.5 mm (H. Max.) User’s Manual Appendix A 288mm 46.5mm Specifications 36mm...
Page 166: Environmental Requirements
Weight Starting at 7.2 lbs / 3.27 kg * Weight may vary depending on product configuration, vendor components, manufacturing variability and options selected. Environmental Requirements Conditions Operating Non-operating Conditions Operating Non-operating Built-in Modem Network control unit (NCU) Type of NCU Type of line Type of dialling Control command...
Page 167 Communication Speed Error correcting Data compression User’s Manual Data transmission and reception 300/1200/2400/4800/7200/9600/12000/14400/ 16800/19200/21600/24000/26400/28800/31200/ 33600 bps Data reception only with V.90/V.92 28000/29333/30666/32000/33333/34666/36000/ 37333/38666/40000/41333/42666/44000/45333/ 46666/48000/49333/50666/52000/53333/54666/ 56000 bps Fax: 2400/4800/7200/9600/12000/14400 bps MNP class 4 and ITU-T V.42 MNP class 5 and ITU-T V.42bis Specifications...
Page 168 Display Modes This appendix contains a table listing all the display modes when the display is set to an external monitor. If you are running some applications (for example a 3D application or video playback and so on), you may see some disturbance, flickering or frame dropping on your screen.
Page 169 Some of display mode might not be supported depending on the external monitor which you use. Displaying movies on a TV or CRT This section describes how to set up your system to display movies simultaneously on your computer's LCD and on an external TV or CRT monitor.
Page 170 6. In Catalyst Control Center window, setup your television or CRT and Notebook displays. * The availability of this feature is dependent on the model you purchased. Displaying movies on a HDMI Monitor This section describes how to set up your system to display movies a HDMI monitor.
Page 171 Display Modes 7. After system applying the display mode to HDMI, click Force then select Desktop area to select the HDMI mode. * The availability of this feature is dependent on the model you purchased. User’s Manual...
Page 172: Certification Agencies
AC Power Cord and Connectors The power cord's AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Wire size:...
Page 173 For the United States and Canada, two pin plug configuration must be a 2-15P (250V) or 1-15P (125 V) and three pin plug coniguration must be 6-15P (250V) or 5-15P (125V) as designated in the U. S. National Electrical code handbook and the Canadian Electrical Code Part II. The following illustrations show the plug shapes for the U.
Page 174 What is your address, phone, and fax number? To register the theft on paper, please follow these procedures: ■ Fill in the TOSHIBA Theft Registration form (or a copy of it) below. ■ Attach a copy of your receipt showing where your computer was purchased.
Page 175 TOSHIBA Theft Registration Send to: Fax number: Country stolen: Machine type: (e.g. P200 Series) Model number: (e.g. PSA50 YXT) Serial number: (e.g. 12345678G) Date stolen: Owner’s details Last name, first name: Company: Street: Postal Code/City: Country: Phone: Fax: User’s Manual...
Page 176 Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AC: alternating current AGP: accelerated graphics port BIOS: basic input output system CD-ROM: Compact Disc-Read Only Memory CD-RW: Compact Disc-Read/Write CMOS: complementary metal-oxide semiconductor CPU: central processing unit CRT: cathode ray tube DC: direct current...
Page 177 SCSI: small computer system interface TFT: thin-film transistor USB: Universal Serial Bus VESA: Video Electronic Standards Association VGA: video graphics array WXGA+: wide extended graphics array adaptor: A device that provides an interface between two dissimilar electronic devices. For example, the AC adaptor modifies the power from a wall outlet for use by the computer.
Page 178 capacity: The amount of data that can be stored on a magnetic storage device such as a floppy disk or hard disk. It is usually described in terms of kilobytes (KB), where one KB = 1024 bytes and megabytes (MB), where one MB = 1024 KB. CD-ROM: A Compact Disc-Read Only Memory is a high capacity disc that can be read from but not written to.
Page 179 DC: Direct Current. Electric current that flows in one direction. This type of power is usually supplied by batteries. default: The parameter value automatically selected by the system when you or the program do not provide instructions. Also called a preset value.
Page 180 gigabyte (GB): A unit of data storage equal to 1024 megabytes. See also megabyte. graphics: Drawings, pictures, or other images, such as charts or graphs, to present information. hard disk: A non-removable disk usually referred to as drive C. The factory installs this disk and only a trained engineer can remove it for servicing.
Page 181 Light Emitting Diode (LED): A semiconductor device that emits light when a current is applied. Liquid Crystal Display (LCD): Liquid crystal sealed between two sheets of glass coated with transparent conducting material. The viewing-side coating is etched into character forming segments with leads that extend to the edge of the glass.
Page 182 parity: 1) The symmetrical relationship between two parameter values (integers) both of which are either on or off; odd or even; 0 or 1. 2) In serial communications, an error detection bit that is added to a group of data bits making the sum of the bits even or odd. Parity can be set to none, odd, or even.
Page 183 TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. TouchPad/Dual Mode Pad: A pointing device integrated into the TOSHIBA computer palm rest. Universal Serial Bus: This serial interface lets you communicate with several devices connected in a chain to a single port on the computer.

Toshiba P200 Series User Manual

Chapter 1 P200 Series Features

Chapter 2 The Grand Tour

Chapter 3 Getting Started

Chapter 4 Operating Basics

Chapter 5 About the HD DVD

Chapter 6 The Keyboard

Chapter 7 Power and Power-Up Modes

Chapter 8 HW Setup

Chapter 9 Optional Devices

Chapter 10 Troubleshooting

Chapter 11 Disclaimers

Quick Links

Related Manuals for Toshiba P200 Series

Summary of Contents for Toshiba P200 Series

Table of Contents