Table of Contents
Advertisement
Available languages
Available languages
Preparation
1
Charging the battery pack
To charge the battery pack, use the AC power adaptor/charger.
Your camera operates only with the "InfoLITHIUM" battery pack (S series).
"InfoLITHIUM" is a trademark of Sony Corporation.
1 Insert the battery pack in the direction of the V mark. Slide the
battery pack in the direction of the arrow.
2 Connect the power cord to the AC power adaptor/charger.
3 Connect the power cord to a wall outlet.
The CHARGE lamp (orange) lights up when charging begins.
When the CHARGE lamp goes off, normal charge is completed. For full charge,
which allows you to use the battery longer than usual, leave the battery pack
attached for about one hour after normal charge is completed.
To remove the battery
pack
Slide up the battery pack.
Charging time
Battery Full charge* Normal charge**
NP-FS11 170 min.
Approximate minutes to charge a
discharged battery pack using the AC
power adaptor/charger AC-VF10.
(Lower temperature require a longer
charging time.)
10-GB
1
110 min.
3
2
*
Charging for about one hour after
the CHARGE lamp goes out.
** Charging just until the CHARGE
lamp goes out.
What is "InfoLITHIUM"?
The "InfoLITHIUM" is a lithium ion
battery pack which can exchange data
such as battery consumption with
compatible video equipment. This unit is
compatible with the "InfoLITHIUM"
battery pack (S series). Your camera
operates only with the "InfoLITHIUM"
battery. "InfoLITHIUM" S series battery
packs have the
"InfoLITHIUM" is a trademark of Sony
Corporation.
mark.
Hide quick links:
Advertisement
Chapters
Table of Contents
