hit counter script
Sony HCD-SR4W Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Receiver
  5. HCD-SR4W
  6. Service manual

Sony HCD-SR4W Service Manual

Sacd/dvd receiver
Hide thumbs
Table of Contents

Advertisement

Quick Links

QQ
3 7 63 1515 0

SERVICE MANUAL

Ver 1.0 2004.07
HCD-SR4W is the amplifier, DVD/
SACD and tuner section in DAV-SR4W.
TE
L 13942296513
Amplifier section
Stereo mode (rated)
Surround mode
(reference)
music power output
* Depending on the sound field settings and the source
there may be no sound output.
Inputs
Output
Phones
Super Audio CD/DVD system
Laser
www
.
Sony Corporation
9-879-095-01
Audio Group
2004G1678-1
Published by Sony Engineering Corporation
© 2004.07
http://www.xiaoyu163.com
Signal format system
Frequency response (at 2 CH STEREO mode)
65 W + 65 W (4 ohms at
1 kHz, DIN)
114
114
Front:
W +
W
(with SS-TS21)
Center*:
114
W
Harmonic distortion
(with SS-CT33)
114
Surround*:
W +
Tuner section
114
W
System
(with SA-TS22W,
SS-TS21)
W × 2
Subwoofer*:
115
FM tuner section
(with SS-WS12)
Tuning range
,
Antenna (aerial)
Antenna (aerial) terminals
VIDEO/TV/SAT:
Intermediate frequency
Sensitivity: 250 mV/
AM tuner section
450 mV/450 mV
Tuning range
Impedance: 50 kilohms
European, Russian models:531 – 1,602 kHz (with the
SURROUND BACK
Voltage: 2V
Middle Easten models:
Impedance: 1 kilohms
Accepts low-and high-
Other models:
impedance headphones.
Semiconductor laser
Antenna (aerial)
(Super Audio CD/DVD: λ
Intermediate frequency
= 650 nm)
(CD: λ = 780 nm)
Emission duration:
continuous
x
ao
u163
y
i
http://www.xiaoyu163.com
HCD-SR4W
2 9
8
Model Name Using Similar Mechanism
Mechanism Type
Optical Pick-up Name
SPECIFICATIONS
Q Q
3
6 7
1 3
1 5
PAL/NTSC
DVD (PCM): 2 Hz to 22
kHz (±1.0 dB)
CD: 2 Hz to 20 kHz (±1.0
dB)
Less than 0.03 %
PLL quartz-locked digital
synthesizer system
87.5 – 108.0 MHz (50 kHz
step)
FM wire antenna (aerial)
75 ohms, unbalanced
10.7 MHz
interval set at 9 kHz)
531 – 1,602 kHz (with the
interval set at 9 kHz)
531 – 1,602 kHz (with the
interval set at 9 kHz)
530 – 1,710 kHz (with the
interval set at 10 kHz )
AM loop antenna (aerial)
450 kHz
co
.
9 4
2 8
AEP Model
UK Model
E Model
Australian Model
Chinese Model
HCD-SR1
CDM80A-DVBU24
DBU-1
0 5
8
2 9
9 4
2 8
Video section
Outputs
European, Russian models:
Video: 1 Vp-p 75 ohms
Other models:
V
ideo: Vp-p 75 ohms
S video:
Y: 1 Vp-p 75 ohms
C:0.286 Vp-p 75 ohms
COMPONENT:
Y: 1 Vp-p 75 ohms
P
/C
, P
B
B
75 ohms
General
Power requirements
European models:
230 V AC, 50/60 Hz
Other models:
220 – 240 V AC,
50/60 Hz
Power consumption
90 W
0.3 W (at the Power
Saving mode)
430 × 60 × 385 mm
Dimensions (approx.)
(w
/h/d)
parts
Mass (approx.)
4.7 kg
Design and specifications are subject to change
without notice.
m
SACD/DVD RECEIVER
9 9
9 9
/C
: 0.7 Vp-p
R
R
incl. projecting

Advertisement

Table of Contents
loading

Related Manuals for Sony HCD-SR4W

Summary of Contents for Sony HCD-SR4W

  • Page 1: Service Manual

    3 7 63 1515 0 SERVICE MANUAL AEP Model UK Model Ver 1.0 2004.07 E Model Australian Model Chinese Model HCD-SR4W is the amplifier, DVD/ SACD and tuner section in DAV-SR4W. Model Name Using Similar Mechanism HCD-SR1 Mechanism Type CDM80A-DVBU24 Optical Pick-up Name DBU-1...
  • Page 2 COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

  • Page 3: Table Of Contents

    HCD-SR4W 3 7 63 1515 0 TABLE OF CONTENTS SERVICING NOTE 6-13. Schematic Diagram – DMB08 Board (1/10) – ....41 ........... 4 6-14. Schematic Diagram – DMB08 Board (2/10) – ....42 GENERAL 6-15. Schematic Diagram – DMB08 Board (3/10) – ....43 ..............

  • Page 4: Servicing Note

    HCD-SR4W SECTION 1 3 7 63 1515 0 SERVICING NOTE MODEL IDENTIFICATION NOTES ON HANDLING THE OPTICAL PICK-UP — BACK PANEL — BLOCK OR BASE UNIT The laser diode in the optical pick-up block may suffer electrostatic break-down because of the potential difference generated by the charged electrostatic load, etc.

  • Page 5: General

    HCD-SR4W SECTION 2 This section is extracted from instruction manual. 3 7 63 1515 0 GENERAL Front Panel A [/1 (power) switch/STANDBY indicator F VOLUME +/– B Disc slot G ./> H x (stop) (remote sensor) L 13942296513 D Front panel display...
  • Page 6 HCD-SR4W 3 7 63 1515 0 Rear Panel (European, Russian models) VIDEO SPEAKER OPTICAL DIGITAL IN AUDIO IN FRONT R CENTER FRONT L FM 75 COAXIAL DIR-T1 EURO AV OUTPUT(TO TV) SURROUND BACK AUDIO IN WOOFER WOOFER F FM 75 Ω COAXIAL jack (19)
  • Page 7 M AUDIO N ANGLE O Number buttons P ENTER Q TUNER MENU R TV [/1 (on/standby) S "/1 (standby) T SONY TV DIRECT U TUNER/BAND L 13942296513 V FUNCTION W m/M/ SLOW, TUNING –/+ X x (stop) Y X (pause) Z MUTING Open the cover.

  • Page 8: Disassembly

    HCD-SR4W SECTION 3 3 7 63 1515 0 DISASSEMBLY • This is can be assemble according to the following sequence. 3-1. DISASSEMBLY FLOW 3-2. SIDE PANEL (R)(L), FRONT PANEL SECTION (Page 9) 3-4. MECHANISM DECK 3- 3. FL BOARD 3-6.

  • Page 9: Side Panel (R)(L), Front Panel Section

    HCD-SR4W 3 7 63 1515 0 3-2. SIDE PANEL (R)(L), FRONT PANEL SECTION qd front panel section qa four screws (+BV3) qs wire (flat type) (17 core) (CN801) 5 two screws (+BV3) 7 side panel (L) 9 three screws q;...

  • Page 10: Mechanism Deck (Cdm80A-Dvbu24)

    HCD-SR4W 3 7 63 1515 0 3-4. MECHANISM DECK (CDM80A-DVBU24) 2 connector (7p) (CN701) 3 wire (flat type) (29 core) 4 mechanism deck (CDM80A-DVBU24) 1 three screws (+BV3) L 13942296513 3-5. AMP BOARD 5 screw (+BVTP 3 × 16)

  • Page 11: Switching Regulator

    HCD-SR4W 3 7 63 1515 0 3-6. SWITCHING REGULATOR 6 connector 1 screw (12p) (CN8) (+BV3) 2 power sheet (top) 5 connector (2p) (CN7) 4 connector (2p) (CN5) 7 connector 3 three screws (4p) (CN4) (+BV3) qa switching regulator...

  • Page 12: Dmb08 Board

    HCD-SR4W 3 7 63 1515 0 3-8. DMB08 BOARD 4 four screws (+BV3) 5 bracket (DMB) 1 connector (7p) (CN007) 6 connector (13p) (CN008) q; wire (flat type) (17 core) (CN005) 7 wire (flat type) 9 wire (flat type)

  • Page 13: Lever (Loading R/L)

    HCD-SR4W 3 7 63 1515 0 3-10. LEVER (LOADING R/L) spr-T (loading L) spr-T (loading R) L 13942296513 5 lever (loading R) 2 two hooks 4 two hooks 3 lever (loading L) PRECAUTION DURING LEVER (LOADING R / L) INSTALLATION Align the horizontal position.

  • Page 14: Disc Stop Lever, Disc Sensor Lever

    HCD-SR4W 3 7 63 1515 0 3-11. DISC STOP LEVER, DISC SENSOR LEVER 1 gear (cap) 2 gear (IDL L) PRECAUTION DURING DISC STOP LEVER INSTALLATION chassis (top) hole 5 two hooks 3 two claws disc stop lever 6 disc stop lever...

  • Page 15: Rf Board

    HCD-SR4W 3 7 63 1515 0 3-13. RF BOARD 5 RF board 2 claw 3 wire (flat type) (CN003) 4 wire (flat type) (CN001) 1 claw L 13942296513 3-14. OPTICAL PICK-UP (DBU-1) 3 two insulators 1 two step screws (M)

  • Page 16: Base Unit

    HCD-SR4W 3 7 63 1515 0 3-15. BASE UNIT 4 floating screw (+PTPWHM 2.6) 6 base unit 3 holder down spring 5 floating screw (+PTPWHM 2.6) 2 lever (CL UP2) L 13942296513 1 screw (+BVTP 2.6 × 8) 3-16. LEVER (BU LOCK)

  • Page 17: Close Lever

    HCD-SR4W 3 7 63 1515 0 3-17. CLOSE LEVER 1 washer (3-1-0.4) 5 close lever 3 claw 2 close lever spring 4 shaft disc stop L 13942296513 3-18. DIR LEVER, GEAR (IDL-B) 2 claw 3 gear puley 4 gear (cap)

  • Page 18: Gear (Idl-C)

    HCD-SR4W 3 7 63 1515 0 3-19. GEAR (IDL-C) 3 gear (IDL-D) 4 three hooks 2 two claws 1 gear (IDL-F) 5 gear loading lever 7 gear (IDL-C) L 13942296513 6 claw u163 http://www.xiaoyu163.com...

  • Page 19: Test Mode

    HCD-SR4W SECTION 4 3 7 63 1515 0 TEST MODE [Version Display Mode] [Cold Reset] The software version is displayed. The cold reset clears all data including preset data stored in Procedure: the RAM to initial conditions. Execute this mode when 1.
  • Page 20 HCD-SR4W 3 7 63 1515 0 [GENERAL DESCRIPTION] 0-1. All (All items continuous check) The Test Mode allows you to make diagnosis and adjustment easily This menu checks all diagnostic items continuously. Normally, all using the remote commander and monitor TV. The instructions, items are checked successively one after another automatically diagnostic results, etc.
  • Page 21 HCD-SR4W 3 7 63 1515 0 0-2-4. Model Type 1-1. DVD-SL (single layer) Press the [1] key on the remote commander and insert a DVD single Model name is displayed. (DAV-SR4W) layer disc following the message. Then the adjustment will be made 0-2-5.
  • Page 22 HCD-SR4W 3 7 63 1515 0 24. Auto track gain adjust 2. DRIVE MANUAL OPERATION Search Check Note: This mode is used for design, and not used in service fundamentally. 25. 32Tj forward On the Test Mode Menu screen, press the [2] key on the remote 26.
  • Page 23 HCD-SR4W 3 7 63 1515 0 2-1. Disc Type 2-1-3. Disc Type CD It sets up so that it may judge as a disc type of specification of the Disc Type disc with which the set was inserted. [1]: CD disc (normal speed, 12 cm)
  • Page 24 HCD-SR4W 3 7 63 1515 0 2-3. Track/Layer Jump 2-5. EEPROM Write Adjust EEPROM Write Adjust Track/Layer Jump FWD R.Lj L0>L1 1. Focus Offset REV L.Lj L1>L0 2. Focus Gain 3.500Tj Fine FWD U.Fj L0>L1 3. Trk. Offset Coarse 4.500Tj Fine...
  • Page 25 HCD-SR4W 3 7 63 1515 0 2-7. Disc Check Memory 3. EMERGENCY HISTORY On the Test Mode Menu screen, selecting [4] displays the Disc Check Memory information such as servo emergency history. The history information from last 1 up to 10 can be scrolled with 1.
  • Page 26 HCD-SR4W 3 7 63 1515 0 4. MECHA ERROR HISTORY • Error code (bb) On the Test Mode Menu screen, selecting [5] displays the 00 : Initializing the mechanism deck. information of mechanism deck error history. 10 : Retry over of eject and loading.

  • Page 27: Electrical Adjustment

    HCD-SR4W SECTION 5 3 7 63 1515 0 ELECTRICAL ADJUSTMENT [TEST DISC LIST] Adjustment Location: Use the following test disc on test mode. – DIAT TRANSMIT Board (SIDE A) – TDV-520CSO (DVD-SL) : PART No. J-2501-236-A LUV-P01 (CD) : PART No. 4-999-032-01 TDV-540C (DVD-DL) : PART No.

  • Page 28: Diagrams

    HCD-SR4W SECTION 6 3 7 63 1515 0 DIAGRAMS • Circuit Boards Location DRIVER board RF board DIAT TRANSMIT board SONY LAMP board PW KEY board FL board DIAT PW board CONTROL KEY board HP board IO board TUNER UNIT...
  • Page 29 HCD-SR4W 3 7 6 3 1 5 1 5 0 MEMO THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. (In addition to this, the necessary note is printed in each block.) For Schematic Diagrams. For Printed Wiring Boards.

  • Page 30: Block Diagram - Rf/Servo Section

    HCD-SR4W 6-1. BLOCK DIAGRAM — RF/SERVO SECTION — 3 7 6 3 1 5 1 5 0 WARFI AUDIO(DSP) SECTION CDDOUT AUDIO(DSP) SECTION OPTICAL PICK-UP BLOCK 117 RFIN SD0 – SD7 (for AUDIO SYSTEM) AUDIO(DSP) DOUT AV DATA BUS...

  • Page 31: Block Diagram - Audio (Dsp) Section

    HCD-SR4W 6-2. BLOCK DIAGRAM — AUDIO (DSP) SECTION — 3 7 6 3 1 5 1 5 0 IC402 (2/2) REFERENCE VOLTAGE GENERATOR 127 WAVRB WARFI D1 - D3, SCK, RF/SERVO 126 WARFI 39 DSIFL DSAL BCKO, LRCKO SUR BACK...

  • Page 32: Block Diagram - Audio (Out) Section

    HCD-SR4W 6-3. BLOCK DIAGRAM — AUDIO (OUT) SECTION — 3 7 6 3 1 5 1 5 0 IC608 D/A CONVERTER SBR-OUT SUR BACK 3 SDTI AOUTL+ SB-OUT IC108 AOUTL- STREAM PROCESSOR 1 MCLK BCKO 2 BICK J800 HPOUTL1...

  • Page 33: Block Diagram - Video Section

    HCD-SR4W 6-4. BLOCK DIAGRAM — VIDEO SECTION — 3 7 6 3 1 5 1 5 0 VDAC_0 IC201 VIDEO AMP, 75ohm DRIVER SD0 - SD7 RF/SERVO AV DATA BUS EXCEPT AEP, UK, RU AEP, UK, RU SECTION J203...

  • Page 34: Block Diagram - Diat Transmit Section

    HCD-SR4W 6-5. BLOCK DIAGRAM — DIAT TRANSMIT SECTION — 3 7 6 3 1 5 1 5 0 VCC(9V) IC801 +15V IC900 +2.5V +2.5V REG SWITCHING R835 REGULATOR R836 IC804 RF MODULATOR IC802 LEVEL SHIFT D/A CONVERTER 49 LRCK...

  • Page 35: Block Diagram - Power Section

    HCD-SR4W 6-6. BLOCK DIAGRAM — POWER SECTION — 3 7 6 3 1 5 1 5 0 DC/DC CONVERTER T801 TO FLUORESCENT RECT INDICATOR TUBE D810,811 D813,814 Q802 (AC IN) +12V M12V 6.2V 3.3V E5.6V IC002 IC001 A-3.3V IC901 (3/3)

  • Page 36: Printed Wiring Board - Rf Board

    HCD-SR4W • See page 28 for Circuit Boards Location. 6-7. PRINTED WIRING BOARD — RF BOARD — :Uses unleaded solder. 3 7 6 3 1 5 1 5 0 RF BOARD RF BOARD (SIDE B) (SIDE A) FLEXIBLE BOARD...

  • Page 37: Schematic Diagram - Rf Board

    HCD-SR4W • See page 70 for Waveforms. • See page 80 for IC Block Diagram. 6-8. SCHEMATIC DIAGRAM — RF BOARD — 3 7 6 3 1 5 1 5 0 RFMON C006 C028 C027 R026 C013 C031 1000p...

  • Page 38: Printed Wiring Board - Driver Board

    HCD-SR4W • See page 28 for Circuit Boards Location. • See page 78 for IC Block Diagram. 6-9. PRINTED WIRING BOARD — DRIVER BOARD — 6-10. SCHEMATIC DIAGRAM — DRIVER BOARD — 3 7 6 3 1 5 1 5 0 :Uses unleaded solder.

  • Page 39: Printed Wiring Board - Dmb08 Board (Side A)

    HCD-SR4W • See page 28 for Circuit Boards Location. 6-11. PRINTED WIRING BOARD — DMB08 BOARD (SIDE A) — :Uses unleaded solder. 3 7 6 3 1 5 1 5 0 DRIVER BOARD DIAT TRANSMIT BOARD CN701 CN801 (Page 62)

  • Page 40: Printed Wiring Board - Dmb08 Board (Side B)

    HCD-SR4W • See page 28 for Circuit Boards Location. 6-12. PRINTED WIRING BOARD — DMB08 BOARD (SIDE B) — :Uses unleaded solder. 3 7 6 3 1 5 1 5 0 IC7004 • Semiconductor Location Ref. No. Location D902...

  • Page 41: Schematic Diagram - Dmb08 Board (1/10)

    HCD-SR4W • See page 73 for IC Block Diagram. • See page 88 for IC Pin Function Description. 6-13. SCHEMATIC DIAGRAM — DMB08 BOARD (1/10) — 3 7 6 3 1 5 1 5 0 FL401 (2012) C401 C402...

  • Page 42: Schematic Diagram - Dmb08 Board (2/10)

    HCD-SR4W 6-14. SCHEMATIC DIAGRAM — DMB08 BOARD (2/10) — 3 7 6 3 1 5 1 5 0 R581 FOCUS/TRACKING COIL DRIVER, SPINDLE, SLED MOTOR DRIVER R580 C519 0.01 C526 R579 8.2k C527 IC501 FAN8035L C514 R533 0.01 R534...

  • Page 43: Schematic Diagram - Dmb08 Board (3/10)

    HCD-SR4W • See page 76 for IC Block Diagrams. • See page 93 for IC Pin Function Description. 6-15. SCHEMATIC DIAGRAM — DMB08 BOARD (3/10) — 3 7 6 3 1 5 1 5 0 TP701 R725 R726 TP702...

  • Page 44: Schematic Diagram - Dmb08 Board (4/10)

    HCD-SR4W • See page 76, 77 for IC Block Diagrams. • See page 97 for IC Pin Function Description. 6-16. SCHEMATIC DIAGRAM — DMB08 BOARD (4/10) — 3 7 6 3 1 5 1 5 0 R888 R886 R884...

  • Page 45: Schematic Diagram - Dmb08 Board (5/10)

    HCD-SR4W • See page 70 for Waveforms. • See page 72, 73 for IC Block Diagrams. • See page 86 for IC Pin Function Description. 6-17. SCHEMATIC DIAGRAM — DMB08 BOARD (5/10) — 3 7 6 3 1 5 1 5 0...

  • Page 46: Schematic Diagram - Dmb08 Board (6/10)

    HCD-SR4W • See page 70 for Waveforms. • See page 74, 75 for IC Block Diagrams. 6-18. SCHEMATIC DIAGRAM — DMB08 BOARD (6/10) — 3 7 6 3 1 5 1 5 0 R608 R600 3.3k R687 C611 0.01...

  • Page 47: Schematic Diagram - Dmb08 Board (7/10)

    HCD-SR4W • See page 75 for IC Block Diagrams. 6-19. SCHEMATIC DIAGRAM — DMB08 BOARD (7/10) — 3 7 6 3 1 5 1 5 0 IC601 IC601 C601 C600 C607 C602 IC B/D L600 C610 LOW-PASS FILTER 6.3V...

  • Page 48: Schematic Diagram - Dmb08 Board (8/10)

    HCD-SR4W • See page 70 for Waveform. • See page 78 for IC Block Diagram. • See page 100 for IC Pin Function Description. 6-20. SCHEMATIC DIAGRAM — DMB08 BOARD (8/10) — 3 7 6 3 1 5 1 5 0...

  • Page 49: Schematic Diagram - Dmb08 Board (9/10)

    HCD-SR4W • See page 70 for Waveforms. • See page 72 for IC Block Diagrams. • See page 81 for IC Pin Function Description. 6-21. SCHEMATIC DIAGRAM — DMB08 BOARD (9/10) — 3 7 6 3 1 5 1 5 0...

  • Page 50: Schematic Diagram - Dmb08 Board (10/10)

    HCD-SR4W 6-22. SCHEMATIC DIAGRAM — DMB08 BOARD (10/10) — 3 7 6 3 1 5 1 5 0 DIAT TRANSMIT BOARD CN801 (Page 63) CN010 TP001 CN001 R024 TP002 TP036 R022 TP003 TP035 TP004 TP034 TP005 TP033 TP006 XRST...

  • Page 51: Printed Wiring Board - Amp Board (Side A)

    HCD-SR4W • See page 28 for Circuit Boards Location. 6-23. PRINTED WIRING BOARD — AMP BOARD (SIDE A) — :Uses unleaded solder. 3 7 6 3 1 5 1 5 0 1 3 9 4 2 2 9 6 5 1 3...

  • Page 52: Printed Wiring Board - Amp Board (Side B)

    HCD-SR4W • See page 28 for Circuit Boards Location. 6-24. PRINTED WIRING BOARD — AMP BOARD (SIDE B) — :Uses unleaded solder. 3 7 6 3 1 5 1 5 0 DIAT SPK DIAT SPK BOARD BOARD CN309 (Page 64)

  • Page 53: Schematic Diagram - Amp Board (1/4)

    HCD-SR4W • See page 70 for Waveform. 6-25. SCHEMATIC DIAGRAM — AMP BOARD (1/4) — 3 7 6 3 1 5 1 5 0 R345 10k 1/10W R347 1/10W SL303 C326 C325 TP331 R317 470 1/10W C336 R316 470 1/10W C324 0.1 25V...

  • Page 54: Schematic Diagram - Amp Board (2/4)

    HCD-SR4W 6-26. SCHEMATIC DIAGRAM — AMP BOARD (2/4) — 3 7 6 3 1 5 1 5 0 R239 C137 0.01 25V B R247 C147 IC106 R384 R383 C178 25V F 1/10W CXD9774M C218 C180 POWER DRIVE R128 C116...

  • Page 55: Schematic Diagram - Amp Board (3/4)

    HCD-SR4W • See page 70 for Waveform. 6-27. SCHEMATIC DIAGRAM — AMP BOARD (3/4) — 3 7 6 3 1 5 1 5 0 R425 470 1/10W R426 560 1/10W R427 560 1/10W CN300 Q303, Q304 SL301 FAN DRIVE...

  • Page 56: Schematic Diagram - Amp Board (4/4)

    HCD-SR4W 6-28. SCHEMATIC DIAGRAM — AMP BOARD (4/4) — 3 7 6 3 1 5 1 5 0 C113 1 16V F TP386 C103 C193 OVER LOAD DETECT 1 16V F POWER DRIVER 2200 IC102 Q104 R111 2SA1602 CXD9774M...

  • Page 57: Printed Wiring Board - Io Section

    HCD-SR4W • See page 28 for Circuit Boards Location. 6-29. PRINTED WIRING BOARD — IO SECTION — :Uses unleaded solder. 3 7 6 3 1 5 1 5 0 AEP,UK,RU IC603 TUNER AEP,UK,RU UNIT OPTICAL DIGITAL EXCEPT AEP,UK,RU AEP,UK,RU...

  • Page 58: Schematic Diagram - Io Section (1/2)

    HCD-SR4W • See page 70 for Waveform. • See page 78, 79 for IC Block Diagrams. 6-30. SCHEMATIC DIAGRAM — IO SECTION (1/2) — 3 7 6 3 1 5 1 5 0 CN102 C101 3300p C113 Q103 2SC2412K-T-146-Q...

  • Page 59: Schematic Diagram - Io Section (2/2)

    HCD-SR4W • See page 70 for Waveforms. • See page 79 for IC Block Diagram. 6-31. SCHEMATIC DIAGRAM — IO SECTION (2/2) — 3 7 6 3 1 5 1 5 0 TP202 TP203 TP204 IC B/D TP205 TP206...

  • Page 60: Printed Wiring Board - Ddcon Board

    HCD-SR4W • See page 28 for Circuit Boards Location. 6-32. PRINTED WIRING BOARD — DDCON BOARD — :Uses unleaded solder. 3 7 6 3 1 5 1 5 0 BOARD CN803 (Page 66) 1 3 9 4 2 2 9 6 5 1 3 DMB08 •...

  • Page 61: Schematic Diagram - Ddcon Board

    HCD-SR4W • See page 70 for Waveform. 6-33. SCHEMATIC DIAGRAM — DDCON BOARD — 3 7 6 3 1 5 1 5 0 CN800 CN801 R804 R815 TP835 TP867 TP838 TP866 R811 R806 TP839 L807 TP840 L806 TP841 L805...

  • Page 62: Printed Wiring Board - Diat Transmit Board

    HCD-SR4W • See page 28 for Circuit Boards Location. :Uses unleaded solder. 6-34. PRINTED WIRING BOARD — DIAT TRANSMIT BOARD — 3 7 6 3 1 5 1 5 0 DIAT TRANSMIT BOARD (SIDE A) FB801 C802 C806 C811...

  • Page 63: Schematic Diagram - Diat Transmit Board

    HCD-SR4W • See page 70 for Waveform. • See page 71 for IC Block Diagrams. 6-35. SCHEMATIC DIAGRAM — DIAT TRANSMIT BOARD — 3 7 6 3 1 5 1 5 0 L812 FB802 10µH C849 C860 L804 L809 10µH...

  • Page 64: Printed Wiring Board - Speaker Out Section

    HCD-SR4W • See page 28 for Circuit Boards Location. 6-36. PRINTED WIRING BOARD — SPEAKER OUT SECTION — :Uses unleaded solder. 3 7 6 3 1 5 1 5 0 DIAT TRANSMIT BOARD CN802 SWITCHING (Page 62) REGULATOR IC900...

  • Page 65: Schematic Diagram - Speaker Out Section

    HCD-SR4W 6-37. SCHEMATIC DIAGRAM — SPEAKER OUT SECTION — 3 7 6 3 1 5 1 5 0 TB301 TERMINAL BOARD IC900 CN312 KIA7809API TP336 C492 TP361 0.001 TP337 C481 TP502 0.015 TP338 TP362 TP339 L903 L900 TP503 GP307...

  • Page 66: Printed Wiring Board - Fl Board

    HCD-SR4W • See page 28 for Circuit Boards Location. 6-38. PRINTED WIRING BOARD — FL BOARD — :Uses unleaded solder. 3 7 6 3 1 5 1 5 0 CONTROL KEY BOARD CN810 (Page 68) 1 3 9 4 2 2 9 6 5 1 3...

  • Page 67: Schematic Diagram - Fl Board

    HCD-SR4W 6-39. SCHEMATIC DIAGRAM — FL BOARD — 3 7 6 3 1 5 1 5 0 FL801 IC801 NJL73H400A REMOTE CONTROL RECEIVER R828 C805 10 50V CN812 C807 0.01 FB807 1 3 9 4 2 2 9 6 5 1 3...

  • Page 68: 7 - Power/Front Panel Section

    HCD-SR4W • See page 28 for Circuit Boards Location. 6-40. PRINTED WIRING BOARD — POWER/FRONT PANEL SECTION — :Uses unleaded solder. 3 7 6 3 1 5 1 5 0 SWITCHING REGULATOR BOARD CN803 (Page 66) VOLUME FUNCTION BOARD...

  • Page 69: Schematic Diagram - Power/Front Panel Section

    HCD-SR4W 6-41. SCHEMATIC DIAGRAM — POWER/FRONT PANEL SECTION — 3 7 6 3 1 5 1 5 0 JW902 LF901 R861 R860 2.2k CN900 CN901 C851 S801 C816 S818 SW. KEY TACT SW C903 LS8J3M LS8J3M 0.22 TP871 TP872...
  • Page 70 HCD-SR4W 3 7 6 3 1 5 1 5 0 • Waveforms – RF Board – – DDCOM Board – – AMP Board – Q802 collector IC305 4 IC108,110 (OUTL1) IC001 1 (DVDRFP) IC001 el (TE) IC001 r; (FE)
  • Page 71 HCD-SR4W 3 7 63 1515 0 • IC Block Diagrams – DIAT TRANSMIT Board – IC801 TK11225CMCL-G CONTROL CIRCUIT CONSTANT OVER HEAT & CURRENT OVER CURRENT SOURCE PROTECT BANDGAP REFERENCE IC804 CXD4016R 48 47 46 45 44 41 40 39...
  • Page 72 HCD-SR4W 3 7 63 1515 0 – DMB08 Board – IC203 BR9040F-WE2 8 WC DETECT SUPPLY INSTRUCTION DECODE VOLTAGE CONTROL AND CLOCK GENERATOR HIGH WRITE VOLTAGE DISABLE GENERATOR ADDRESS ADDRESS 8bit DECODER 8bit INSTRUCTION BUFFER 4,096bit REGISTER EEPROM DATA...
  • Page 73 HCD-SR4W 3 7 63 1515 0 IC303 SM8707GV-G-E2 VDD1 VSS1 PHASE PHASE Div.1 DETECTOR1 PUMP1 LOOP Div.1 VDD2 VDD3 VSS2 CONTROL LOGIC VSS3 X'tal IC401 CXD3068Q 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41...
  • Page 74 HCD-SR4W 3 7 63 1515 0 IC604 IS61LV6416-10TLT ROW/COLUMN DECODER OUTPUT ENABLE BUFFER 64K x 16 BYTE ENABLE MEMORY CHIP ENABLE BUFFER ARRAY BUFFER I/O 15 I/O 0 I/O 14 I/O 1 I/O 13 I/O 2 I/O 12 I/O 3...
  • Page 75 HCD-SR4W 3 7 63 1515 0 IC608 AK4381VT-E2 DZFL CLOCK DE–EMPHASIS MCLK DZFR DIVIDER CONTROL ∆∑ AOUTL+ INTERPOLATOR MODULATOR BICK AOUTL– AUDIO SDTI DATA INTERFACE ∆∑ LRCK AOUTR+ INTERPOLATOR MODULATOR AOUTR– µP CCLK INTERFACE CDTI IC609 PCM1802DBR SINGLE-END/ 5TH ORDER...
  • Page 76 HCD-SR4W 3 7 63 1515 0 IC703 NJM3404AV (TE2) IC704 TK11125CSCL-G VOUT A OUTPUT A-INPUT B OUTPUT A+INPUT B-INPUT OVER HEAT & CONTROL OVER CURRENT CIRCUIT PROTECTION B+INPUT BANDGAP REFERENCE VCONT L 13942296513 IC706 M51V18165M-60TS-KR1 40 – 36 34 33...
  • Page 77 HCD-SR4W 3 7 63 1515 0 IC808 MSM56V16160F-8TK7R1 35 34 TIMING REGISTER PROGRAMING OUTPUT REGISTER BUFFERS LATENCY INTERNAL INTERNAL COLUMN & COLUMN READ ADDRESS ADDRESS BURST ADDRESS ADDRESS DATA BUFFERS BUFFERS CONTROLLER COUNTOR COUNTOR REGISTER CONTROLLER INPUT DATA SENSE...
  • Page 78 HCD-SR4W 3 7 63 1515 0 IC907 PST3645NR – DRIVER Board – IC701 BA6956AN CONTROL LOGIC L 13942296513 – IO Board – IC101 BU1924F-E2 12 11 10 CLOCK TEST PLL 57kHz RDS/ARI 1187.5Hz COMPARATOR 8th SWITCHED BIPHASE CAPACITOR DECODER...
  • Page 79 HCD-SR4W 3 7 63 1515 0 IC201 MM1623BFBE S-DC OUT 28 VCC2 S1/S2 27 S-DC OUT 150kΩ 75Ω VCC1 BIAS 6.75MHz DRIVER LOW-PASS C IN 26 C OUT FILTER MUTE 1 25 S1 CLAMP –6dB 24 S2 CVBS IN 75Ω...
  • Page 80 HCD-SR4W 3 7 63 1515 0 – RF Board – IC001 CXD1881AR 64 63 62 61 60 59 55 54 53 52 FAST ATTACK INPUT OUTPUT HOLD FULL WAVE AGC CHARGE INHIBIT RECTIFER PUMP PROGRAMMABLE FROM S-PORT EQUALIZER INPUT...
  • Page 81 HCD-SR4W 3 7 63 1515 0 • IC Pin Function Description DMB08 BOARD IC206 ZIVA5X-C2F (DVD SYSTEM PROCESSOR) Pin No. Pin Name Description VDDP — Power supply terminal (+3.3V) (I/O signal) Address bus HD15 Data bus (address signal multiplexed)
  • Page 82 HCD-SR4W 3 7 63 1515 0 Pin No. Pin Name Description SDRAM bank select 0 signal output MCS0 SDRAM chip select 0 signal output MCS1 Not used MRAS SDRAM row address strobe signal output MCAS SDRAM column address strobe signal output SDRAM write enable signal output (“H”...
  • Page 83 HCD-SR4W 3 7 63 1515 0 Pin No. Pin Name Description MD27 SDRAM data GND25 — Ground terminal (SDRAM I/O signal) MDQM3 Byte read /write mask signal 3 output VDD25 — Power supply terminal (+3.3V) (SDRAM I/O signal) MD28...
  • Page 84 HCD-SR4W 3 7 63 1515 0 Pin No. Pin Name Description AVDD2 — Power supply terminal (+3.3V) (analog PLL) AVDD1 — Power supply terminal (+3.3V) (analog PLL) AVSS1 — Ground terminal (analog PLL) — Power supply terminal (+1.8V) (inside core) —...
  • Page 85 HCD-SR4W 3 7 63 1515 0 Pin No. Pin Name Description — Power supply for 5V tolerance voltage input Latch enable signal output for address data demux RST_SPC Reset signal output to the mechanism controller (IC301) HCS3 Not used...
  • Page 86 HCD-SR4W 3 7 63 1515 0 DMB08 BOARD IC301 CXP973064-245R (MECHANISH CONTROLLER) Pin No. Pin Name Description EEP SO Not used SDEN Serial data enable signal output to DVD/CD RF amplifier Digital out on/off control signal output to the digital signal processor DOCTRL/ISBTEST “L”: digital out off, “H”: digital out on...
  • Page 87 HCD-SR4W 3 7 63 1515 0 Pin No. Pin Name Description MUTE DSD Muting on/off control signal output to the DSD decoder “H”: muting on SQCK Subcode Q data reading clock signal output to the digital signal processor —...
  • Page 88 HCD-SR4W 3 7 63 1515 0 DMB08 BOARD IC401 CXD3068Q (DIGITAL SIGNAL PROCESSOR, DIGITAL SERVO PROCESSOR) Pin No. Pin Name Description DVDD0 — Power supply terminal (+3.3V) (digital system) XRST Reset signal input from the mechanism controller “L”: reset...
  • Page 89 HCD-SR4W 3 7 63 1515 0 Pin No. Pin Name Description IGEN Stabilized current input for operational amplifiers AVDD0 — Power supply terminal (+3.3V) (analog system) ASYO EFM full-swing output terminal ASYI Asymmetry comparator voltage input terminal RFAC EFM signal input from the DVD/CD RF amplifier AVSS1 —...
  • Page 90 HCD-SR4W 3 7 63 1515 0 DMB08 BOARD IC607 CXD9618BQ (AUDIO DIGITAL SIGNAL PROCESSOR) Pin No. Pin Name Description — Ground terminal XRST Reset signal input from the system controller “L”: reset EXTIN Master clock signal input terminal Not used...
  • Page 91 HCD-SR4W 3 7 63 1515 0 Pin No. Pin Name Description VDDE — Power supply terminal (+3.3V) WMD1 S-RAM wait mode setting terminal Fixed at “H” in this set — Ground terminal WMD0 S-RAM wait mode setting terminal Fixed at “H” in this set...
  • Page 92 HCD-SR4W 3 7 63 1515 0 Pin No. Pin Name Description SDI3 Rear L-ch and R-ch audio serial data input from the digital audio processor SDI4 Audio serial data input terminal Not used Synchronous/asychronous selection signal input terminal SYNC “L”: Synchronous, “H”: asynchronous (fixed at “H”...
  • Page 93 HCD-SR4W 3 7 63 1515 0 DMB08 BOARD IC701 TMC57929PGF-RDP (DVD DECODER) Pin No. Pin Name Description 1, 2 D5, D6 Two-way data bus with the mechanism controller — Ground terminal (digital system) Two-way data bus with the mechanism controller Address signal input from the mechanism controller —...
  • Page 94 HCD-SR4W 3 7 63 1515 0 Pin No. Pin Name Description DVD mode: Serial data request signal input from the DVD system processor XHAC SACD mode: Serial data request signal input from the DSD decoder HINT Not used XS16...
  • Page 95 HCD-SR4W 3 7 63 1515 0 Pin No. Pin Name Description RFDCC Input terminal for adjusting DC cut high-pass filter for RF signal Not used RFIN RF signal input from the DVD/CD RF amplifier 118, 119 VCCA5, VCCA4 —...
  • Page 96 HCD-SR4W 3 7 63 1515 0 Pin No. Pin Name Description XTAL 33.8688 MHz clock signal input terminal — Ground terminal (digital system) XTL2 System clock output terminal (33.8688 MHz) XTL1 System clock input terminal (33.8688 MHz) — Power supply terminal (+3.3V) (digital system)
  • Page 97 HCD-SR4W 3 7 63 1515 0 DMB08 BOARD IC801 CXD2753R (DSD DECODER) Pin No. Pin Name Description VSCA0 — Ground terminal (for core) XMSLAT Serial data latch pulse signal input from the mechanism controller MSCK Serial data transfer clock signal input from the mechanism controller...
  • Page 98 HCD-SR4W 3 7 63 1515 0 Pin No. Pin Name Description PHREFO Bit clock signal (2.8224 MHz) output to the digital audio processor Not used ZDFL Front L-ch Zero data flag detection signal output terminal Not used DSAL Front L-ch DSD data output to the digital audio processor...
  • Page 99 HCD-SR4W 3 7 63 1515 0 Pin No. Pin Name Description 117 to 120 WAD4 to WAD7 External A/D data input terminal for PSP physical disc mark detection Not used VDCB2 — Power supply terminal (+2.5V) (for core) WRFD...
  • Page 100 HCD-SR4W 3 7 63 1515 0 DMB08 BOARD IC901 uPD703033BYGF-M59-3BA-A (SYSTEM CONTROLLER) Pin No. Pin Name Description DAMP-DATA Serial data output to the stream processors DAMP-CLK Serial data transfer clock signal output to the stream processors Communication data bus with the DVD system processor and mechanism...
  • Page 101 HCD-SR4W 3 7 63 1515 0 Pin No. Pin Name Description CLKOUT Clock signal output terminal Not used (open) DIP-RST Reset signal output to the power drivers “L”: reset DIP-OCP Protect signal input from the over load detection circuit...
  • Page 102 HCD-SR4W 3 7 63 1515 0 Pin No. Pin Name Description SIRCS Remote control signal input System wake up signal input by pressing a key on the front panel or remote WAKE commander or disc insert detect switch RDS-CLK...

  • Page 103: Exploded Views

    HCD-SR4W SECTION 7 3 7 63 1515 0 EXPLODED VIEWS NOTE: • -XX and -X mean standardized parts, so they • Abbreviation The components identified by mark 0 or may have some difference from the original : Australian model dotted line with mark 0 are critical for safety.

  • Page 104: Front Panel Section

    HCD-SR4W 3 7 63 1515 0 7-2. FRONT PANEL SECTION not supplied supplied not supplied not supplied L 13942296513 not supplied not supplied not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark...

  • Page 105: Chassis Section

    HCD-SR4W 3 7 63 1515 0 7-3. CHASSIS SECTION not supplied mechanism deck section-1 supplied (CDM80A-DVBU24) supplied not supplied supplied supplied not supplied not supplied supplied L 13942296513 supplied not supplied Ref. No. Part No. Description Remark Ref. No.

  • Page 106: Mechanism Deck Section-1 (Cdm80A-Dvbu24)

    HCD-SR4W 3 7 63 1515 0 7-4. MECHANISM DECK SECTION-1 (CDM80A-DVBU24) mechanism deck section-2 (CDM80A-DVBU24) M701 L 13942296513 mechanism deck section-3 (CDM80A-DVBU24) base unit section Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-985-672-01 SCREW (+PTPWHM2.6), FLOATING...

  • Page 107: Mechanism Deck Section-2 (Cdm80A-Dvbu24)

    HCD-SR4W 3 7 63 1515 0 7-5. MECHANISM DECK SECTION-2 (CDM80A-DVBU24) L 13942296513 not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-245-627-01 WASHER (6-2.7-0.4) 4-245-640-01 GEAR (CAP) 4-245-637-01 ROLLER, RUBBER 4-245-626-01 CAP, CLAMPER DBU-1...

  • Page 108: Mechanism Deck Section-3 (Cdm80A-Dvbu24)

    HCD-SR4W 3 7 63 1515 0 7-6. MECHANISM DECK SECTION-3 (CDM80A-DVBU24) supplied L 13942296513 supplied supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 4-245-643-01 GEAR (IDL-C) 4-245-628-01 LEVER (BU LOCK) 4-248-722-01 SPR-E, DIR 4-248-206-01 WASHER (3-1-0.4)

  • Page 109: Base Unit Section

    HCD-SR4W 3 7 63 1515 0 7-7. BASE UNIT SECTION L 13942296513 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-4728-690-A RF BOARD, COMPLETE 3-053-847-41 INSULATOR 1-685-250-11 FLEXIBLE BOARD 0 605 1-477-263-13 OPTICAL PICK-UP (DBU-1)

  • Page 110: Electrical Parts List

    HCD-SR4W SECTION 8 3 7 63 1515 0 ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the • RESISTORS When indicating parts by reference number, parts list may be different from the parts All resistors are in ohms.
  • Page 111 HCD-SR4W 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C255 1-162-966-11 CERAMIC CHIP 0.0022uF 10% C356 1-162-927-11 CERAMIC CHIP 100PF C357 1-162-927-11 CERAMIC CHIP 100PF C256 1-162-966-11 CERAMIC CHIP 0.0022uF 10%...
  • Page 112 HCD-SR4W 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < IC > R137 1-216-864-11 SHORT CHIP R138 1-216-864-11 SHORT CHIP IC101 6-704-802-01 IC CXD9774M R139 1-216-864-11 SHORT CHIP IC102 6-704-802-01 IC CXD9774M...
  • Page 113 HCD-SR4W 3 7 63 1515 0 CONTROL KEY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R308 1-216-817-11 METAL CHIP 1/10W R395 1-216-845-11 METAL CHIP 100K 1/10W R309 1-216-864-11 SHORT CHIP R396 1-216-809-11 METAL CHIP...
  • Page 114 HCD-SR4W CONTROL KEY 3 7 63 1515 0 DDCON DIAT PW DIAT SPK Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C857 1-162-964-11 CERAMIC CHIP 0.001uF L807 1-400-135-11 INDUCTOR C858 1-164-733-11 CERAMIC CHIP 820PF < TRANSISTOR >...
  • Page 115 HCD-SR4W 3 7 63 1515 0 DIAT SPK DIAT TRANSMIT Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark CN312 1-691-766-21 PLUG (MICRO CONNECTOR) 4P C842 1-164-230-11 CERAMIC CHIP 220PF C844 1-107-826-11 CERAMIC CHIP 0.1uF < GROUND TERMINAL BOARD >...
  • Page 116 HCD-SR4W DIAT TRANSMIT 3 7 63 1515 0 DMB08 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < TRANSISTOR > < CAPACITOR > Q801 8-729-230-49 TRANSISTOR 2SC2712G-TE85L C001 1-126-206-11 ELECT CHIP 100uF 6.3V C003 1-126-206-11 ELECT CHIP 100uF 6.3V...
  • Page 117 HCD-SR4W 3 7 63 1515 0 DMB08 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C260 1-164-943-11 CERAMIC CHIP 0.01uF C427 1-117-863-11 CERAMIC CHIP 0.47uF 6.3V C261 1-164-943-11 CERAMIC CHIP 0.01uF C428 1-164-940-11 CERAMIC CHIP 0.0033uF 10%...
  • Page 118 HCD-SR4W DMB08 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C636 1-107-820-11 CERAMIC CHIP 0.1uF C741 1-164-943-11 CERAMIC CHIP 0.01uF C637 1-164-943-11 CERAMIC CHIP 0.01uF C742 1-164-943-11 CERAMIC CHIP 0.01uF...
  • Page 119 HCD-SR4W 3 7 63 1515 0 DMB08 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C861 1-164-943-11 CERAMIC CHIP 0.01uF FB010 1-469-324-21 FERRITE, EMI (SMD) (2012) C865 1-164-943-11 CERAMIC CHIP 0.01uF FB011 1-469-324-21 FERRITE, EMI (SMD) (2012)
  • Page 120 HCD-SR4W DMB08 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark IC603 8-759-337-40 IC NJM2904V (TE2) R033 1-218-949-11 RES-CHIP 1/16W IC604 6-704-037-01 IC IS61LV6416-10TLT R035 1-218-949-11 RES-CHIP 1/16W IC605 8-759-835-63 IC NJM2391DL1-26 (TE1)
  • Page 121 HCD-SR4W 3 7 63 1515 0 DMB08 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R231 1-218-935-11 RES-CHIP 1/16W R350 1-218-941-81 RES-CHIP 1/16W R232 1-218-990-11 SHORT CHIP R353 1-218-965-11 RES-CHIP 1/16W R233 1-218-965-11 RES-CHIP 1/16W...
  • Page 122 HCD-SR4W DMB08 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R517 1-218-957-11 RES-CHIP 2.2K 1/16W R629 1-218-941-81 RES-CHIP 1/16W R519 1-218-977-11 RES-CHIP 100K 1/16W R630 1-218-949-11 RES-CHIP 1/16W R631 1-218-941-81 RES-CHIP...
  • Page 123 HCD-SR4W 3 7 63 1515 0 DMB08 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R721 1-208-719-11 METAL CHIP 0.5% 1/16W R848 1-218-933-11 RES-CHIP 1/16W R724 1-208-683-11 METAL CHIP 0.5% 1/16W R849 1-218-933-11 RES-CHIP 1/16W...
  • Page 124 HCD-SR4W DMB08 3 7 63 1515 0 DRIVER Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R959 1-218-990-11 SHORT CHIP < IC > R960 1-218-965-11 RES-CHIP 1/16W IC701 8-759-598-69 IC BA6956AN R961 1-218-965-11 RES-CHIP 1/16W...
  • Page 125 HCD-SR4W 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R879 1-216-825-11 METAL CHIP 2.2K 1/10W A-1066-374-A IO BOARD, COMPLETE (AEP, UK, RU) R880 1-216-821-11 METAL CHIP 1/10W A-1066-644-A IO BOARD, COMPLETE (EA, KR, AUS, CH)
  • Page 126 HCD-SR4W 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C238 1-126-916-11 ELECT 1000uF 6.3V < IC > (EXCEPT AEP, UK, RU) C239 1-126-916-11 ELECT 1000uF 6.3V IC101 8-759-557-36 IC BU1924F-E2 (AEP, UK, RU)
  • Page 127 HCD-SR4W 3 7 63 1515 0 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R112 1-218-867-11 METAL CHIP 6.8K 1/10W R235 1-216-833-11 METAL CHIP 1/10W R113 1-218-867-11 METAL CHIP 6.8K 1/10W (AEP, UK, RU) R114...
  • Page 128 HCD-SR4W 3 7 63 1515 0 PW KEY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < VIBRATOR > C017 1-162-966-11 CERAMIC CHIP 0.0022uF 10% C018 1-164-172-11 CERAMIC CHIP 0.0056uF 10% X101 1-579-900-21 VIBRATOR, CRYSTAL 4.332MHz (AEP, UK, RU)
  • Page 129 0.001uF (AEP, UK, RU) < JACK > J203 1-815-911-11 CONNECTOR, SQUARE TYPE 21P (EURO AV T OUTPUT (TO TV)) (AEP, UK, RU) ************************************************************ 1-861-987-12 SONY LAMP BOARD **************** < CAPACITOR > C862 1-162-964-11 CERAMIC CHIP 0.001uF C863 1-162-964-11 CERAMIC CHIP 0.001uF...
  • Page 130 HCD-SR4W 3 7 63 1515 0 REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page.

Table of Contents