Table of Contents
Advertisement
SERVICE MANUAL
Ver. 1.0 2010.06
• HCD-SLK1i is the amplifi er, USB, memory card, disc player and tuner section in WHG-SLK1i.
• HCD-SLK2i is the amplifi er, USB, memory card, disc player and tuner section in WHG-SLK2i.
SPECIFICATIONS
Inputs
Main unit
VIDEO/SAT VIDEO IN:
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
VIDEO/SAT AUDIO IN:
HARMONIC DISTORTION:
(HCD-SLK1i The United States model
only)
With 8 ohm loads, both channels driven,
Outputs
from 120
10,000 Hz; rated 35 watts per
DVD VIDEO OUT:
channel minimum RMS power, with no
more than 1% total harmonic distortion
from 800 milliwatts to rated output.
PHONES:
Amplifier section
SPEAKERS:
The following measured at AC 120 V, 60 Hz
(North American model)
The following measured at AC 127 V, 60 Hz
(Mexican model)
The following measured at AC 127 V
USB section
240 V, 60 Hz (Brazilian model)
(USB) port: Type A
The following measured at AC 220 V
240 V, 50/60 Hz (European, Korean,
Argentine and Thai models)
Memory card section
The following measured at AC 120 V
240 V, 50/60 Hz (Other models)
Multi memory card slot:
HCD-SLK2i
Brazilian model:
Power output (rated):
Disc player section
85 W + 85 W (at 6 Ω, 1 kHz,
1% THD)
System:
RMS output power (reference):
100 W + 100 W (per channel at 6 Ω,
1 kHz, 10% THD)
Laser Diode Properties
Other models:
Power output (rated):
85 W + 85 W (at 6 Ω, 1 kHz,
1% THD)
RMS output power (reference):
120 W + 120 W (per channel at 6 Ω,
Frequency response
1 kHz)
HCD-SLK1i
The United States model:
Video color system format
RMS output power (reference):
65 W + 65 W (per channel at 8 Ω,
1 kHz)
Other models:
Power output (rated):
Tuner section
40 W + 40 W (at 8 Ω, 1 kHz,
FM stereo, FM/AM superheterodyne tuner
1% THD)
FM tuner section
RMS output power (reference):
Tuning range
65 W + 65 W (per channel at 8 Ω,
1 kHz)
Sony Corporation
9-889-894-01
2010F05-1
Audio&Video Business Group
©
2010.06
Published by Sony Techno Create Corporation
HCD-SLK1i/SLK2i
Photo: HCD-SLK1i
Antenna:
FM lead antenna
1 Vp-p, 75 Ω
Antenna terminals:
75 Ω unbalanced
Intermediate frequency:
voltage 250/450 mV, impedance
47 kΩ
10.7 MHz
AM tuner section
Tuning range
max. output level 1 Vp-p, unbalanced,
European and Saudi Arabian models:
Sync negative, load impedance 75 Ω
531 kHz
North American and Latin American
accepts headphones of 8 Ω or more
models:
530 kHz
Use only the supplied speakers
531 kHz
SS-SLK2i (WHG-SLK2i) or SS-SLK1i
Other models:
(WHG-SLK1i).
531 kHz
530 kHz
Antenna:
AM loop antenna
Antenna terminals:
Maximum current: 500 mA
External antenna terminal
Intermediate frequency:
450 kHz
Compatible with "Memory Stick"
media (page 110), SD memory cards
General
(page 111)
Power requirements
North American model:
AC 120 V, 60 Hz
Mexican model:
AC 127 V, 60 Hz
Compact disc and digital audio and
Brazilian model:
video system
AC 127 V
European, Korean, Argentine and
Emission duration: Continuous
Thai models:
Laser Output*: Less than 44.6 μW
AC 220 V
* This output is the value measurement
Other models:
at a distance of 200mm from the
AC 120 V
objective lens surface on the Optical
Power consumption
Pick-up Block with 7mm aperture.
HCD-SLK2i:
DVD (PCM 48 kHz): 2 Hz
22 kHz
80 W
(±1 dB)
HCD-SLK1i:
CD: 2 Hz
20 kHz (±0.5 dB)
60 W
Dimensions (W/H/D) (excl. speakers)
North American and Latin American
HCD-SLK2i:
Approx. 330 mm × 203 mm ×
models: NTSC
Other models: NTSC and PAL
141 mm
HCD-SLK1i:
Approx. 330 mm × 203 mm ×
138 mm
Mass (excl. speakers)
HCD-SLK2i:
Approx. 3.7 kg
North American and Brazilian
HCD-SLK1i:
models:
Approx. 3.6 kg
87.5 MHz
108.0 MHz (100 kHz
step)
Design and specifications are subject to
Other models:
87.5 MHz
108.0 MHz (50 kHz step)
change without notice.
Saudi Arabia Model
Model Name Using Similar Mechanism
Mechanism Type
Optical Pick-up Name
iPod models
You can use the following iPod models on this system. Update your iPod with the latest
software before using it.
1,602 kHz (9 kHz step)
1,710 kHz (10 kHz step)
1,710 kHz (9 kHz step)
iPod nano
5th generation
1,602 kHz (9 kHz step)
(video camera)
1,610 kHz (10 kHz step)
iPod classic
160 GB (2007)
240 V, 60 Hz
240 V, 50/60 Hz
240 V, 50/60 Hz
iPod nano
2nd generation
(aluminum)
US Model
Canadian Model
AEP Model
Chinese Model
Singapore Model
Korean Model
Thai Model
HCD-SLK1i
Mexican Model
Brazilian model
Argentina model
HCD-SLK2i
E Model
HCD-SLK1i/SLK2i
NEW
CDM86B-DVBU101
KHM-313CAB
iPod touch
iPod classic
iPod nano
2nd generation
120 GB
4th generation
160 GB (2009)
(video)
iPod touch
iPod nano
iPod classic
1st generation
3rd generation
80 GB
(video)
DVD RECEIVER
Advertisement
Table of Contents
Related Manuals for Sony HCD-SLK1i - Dvd Receiver
Summary of Contents for Sony HCD-SLK1i - Dvd Receiver
-
Page 1: Specifications
87.5 MHz 108.0 MHz (100 kHz step) Design and specifications are subject to Other models: 87.5 MHz 108.0 MHz (50 kHz step) change without notice. Sony Corporation 9-889-894-01 2010F05-1 Audio&Video Business Group © 2010.06 Published by Sony Techno Create Corporation... - Page 2 PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE FONC- TIONNEMENT. NE REMPLACER CES COMPOSANTS QUE repairing. PAR DES PIÈCES SONY DONT LES NUMÉROS SONT DON- • Do not touch the soldering iron on the same conductor of the NÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS circuit board (within 3 times).
-
Page 3: Table Of Contents
HCD-SLK1i/SLK2i TABLE OF CONTENTS SERVICING NOTES 4-15. Printed Wiring Board - LCD Board - ......36 ..........4-16. Schematic Diagram - LCD Board - ........ 37 4-17. Printed Wiring Boards - AUDIO IN/OUT Section - ..38 DISASSEMBLY 4-18. Schematic Diagram - AUDIO IN/OUT Section - ... 39 2-1. -
Page 4: Servicing Notes
HCD-SLK1i/SLK2i SECTION 1 SERVICING NOTES NOTE FOR REPLACEMENT OF THE MS-214 BOARD NOTES ON HANDLING THE OPTICAL PICK-UP When the MS-214 board is defective, exchange the entire MD BLOCK OR BASE UNIT (AU) ASSY. The laser diode in the optical pick-up block may suffer electro- NOTE FOR REPLACEMENT OF THE TOUCH PANEL static break-down because of the potential difference generated by BOARD... - Page 5 HCD-SLK1i/SLK2i CAPACITOR ELECTRICAL DISCHARGE PROCESSING When checking the board, the electrical discharge is necessary for the electric shock prevention. Connect the resistors referring to the fi gure below. • Switching regulator (C201, C202) (for HCD-SLK1i) Both ends of respective capacitors. –...
- Page 6 HCD-SLK1i/SLK2i HOW TO EJECT THE DISC WHEN POWER SWITCH TURNS OFF Note: Please take out the DVD mechanism block from a set referring to “SECTION 2 DISASSEMBLY”. disc – DVD mechanism block bottom view – Please rotate the pully in the direction of the arrow after removing mechanism deck, and eject the disc.
- Page 7 HCD-SLK1i/SLK2i MAIN BOARD SERVICE POSITION • Please connect following extension jig. Jig No. Part No. Pitch (mm) Cores Length (mm) J-2501-102-A CN302 CN408 DISPLAY board Note: Please do not make a mistake when you install the extention jig because CN101 and CN301 on MAIN board and CN302 and CN408 on DISPLAY board are all thirteen pins.
- Page 8 HCD-SLK1i/SLK2i DISPLAY BOARD SERVICE POSITION • Please connect following extension jig. Connect extension jig 2 Jig No. Part No. Pitch (mm) Cores Length (mm) to the DISPLAY board (CN407) J-2501-102-A and LCD board (CN904) J-2501-245-A CN904 J-2501-248-A CN903 DISPLAY board Note: Please do not make a mistake when you install the extention jig because CN101 CN302...
-
Page 9: Disassembly
HCD-SLK1i/SLK2i SECTION 2 DISASSEMBLY • This set can be disassembled in the order shown below. 2-1. DISASSEMBLY FLOW 2-2. TOP PANEL BLOCK (Page 10) 2-3. REAR CASE BLOCK (Page 10) 2-4. MAIN CHASSIS BLOCK (Page 11) 2-5. MAIN BOARD 2-6. SWITCHING REGULATOR BLOCK (Page 12) (Page 12) 2-7. -
Page 10: Top Panel Block
HCD-SLK1i/SLK2i Note: Follow the disassembly procedure in the numerical order given. 2-2. TOP PANEL BLOCK 6 top panel block 5 connector (CN405) 2 two flat head screws (TP) 4 wire (flat type) (11 core) (CN404) 1 two flat head screws (TP) 2 two flat head screws (TP) -
Page 11: Main Chassis Block
HCD-SLK1i/SLK2i 2-4. MAIN CHASSIS BLOCK – Rear top view – 2 cord bushing wa main chassis block qh two screws qh two screws (BVTP2.6) (BVTP2.6) 3 Lift up the lead pin. Note 2: Please do not make a mistake when you qh screw (BVTP2.6) install the wire (flat type) (13 core) because CN302 and CN408 are both... -
Page 12: Main Board
HCD-SLK1i/SLK2i 2-5. MAIN BOARD Note 1: Please let me crawl the side of the fan motor about the cable fan cable because the cable is drawn in to the fan motor. 5 wire (flat type) (11 core) (CN302) (AEP)/ wire (flat type) (9 core) (CN303) (except AEP) 6 connector (CN902) 1 DC fan connector... -
Page 13: Cover (Cdm) Block
HCD-SLK1i/SLK2i 2-7. COVER (CDM) BLOCK 4 screw 4 four screws (BVTP2.6) (BVTP2.6) 5 coating clip 6 cover (CDM) block 2 wire (flat type) (27 core) (CN406) 3 wire (flat type) (23 core) (CN407) 1 wire (flat type) (11 core) (CN412) sheet Note: Please spread a sheet under a set not to injure front panel. -
Page 14: Display Board
HCD-SLK1i/SLK2i 2-9. DISPLAY BOARD 4 wire (flat type) (11 core) (CN411) 2 ferrite core (US, Canadian) 3 wire (flat type) (15 core) (CN002) 1 connector (CN301) 5 eight screws 6 shield (MS) (BVTP2.6) 0 radiation sheet qa DISPLAY board 9 ground plate (USB) 8 cover (CDM) -
Page 15: Optical Pick-Up Block (Khm-313Cab)
HCD-SLK1i/SLK2i 2-10. OPTICAL PICK-UP BLOCK (KHM-313CAB) 1 four insulator screws 5 insulator 3 connector 5 insulator 5 insulator 6 optical pick-up block (KHM-313CAB) 4 wire (flat type) (24 core) 5 insulator – DVD mechanism deck block bottom view – 2-11. BELT (MOT) 1 belt (MOT) –... -
Page 16: Lcd Board
HCD-SLK1i/SLK2i 2-12. LCD BOARD 8 wire (flat type) (23 core) (CN904) 7 wire (flat type) (27 core) (CN903) 4 two screws (BVTP2.6) 1 LCD module connector 9 LCD board (CN905) 5 two claws 2 LCD module flexible flat cable (CN901) sheet Note: Please spread a sheet under a set not to injure front panel. -
Page 17: Test Mode
HCD-SLK1i/SLK2i SECTION 3 TEST MODE COLD RESET COMMON TEST Reset the system to its factory default settings. The test of each category is executed. Procedure: 1. Press the [ ] button to turn on the system. Procedure: 2. Touch the [ ], [ ], [ ] and [... -
Page 18: Dvd Section
HCD-SLK1i/SLK2i DISC ANTITHEFT LOCK REMOTE DISABLE MODE This mode is used to unable to take sample disc out of disc slot in This mode disable the remote commander reception. the shop. Procedure: Procedure: 1. Press the [ ] button to turn on the system. 1. - Page 19 HCD-SLK1i/SLK2i 1-1. EXECUTING IOP MEASUREMENT 1-2. EMERGENCY HISTORY In order to execute IOP measurement, the following standard pro- To check the emergency history, please follow the following pro- cedures must be followed. cedure. Procedure: Procedure: 1. Enter the DVD service mode. 1.
- Page 20 HCD-SLK1i/SLK2i Open kick spindle error 1-3. CHECK VERSION INFORMATION Spindle stop error To check the version information, please follow the following pro- Focus on error cedure. Seek fail error Read Q data/ID error 1. From the Top Menu of Remocon Diagnosis Menu, select “4. Lead in data read fail Version Information”...
-
Page 21: Diagrams
HCD-SLK1i/SLK2i SECTION 4 DIAGRAMS 4-1. BLOCK DIAGRAM - SERVO Section - OPTICAL PICK-UP BLOCK (KHM-313CAB) RFIP RFIN AUDIO D/A CONVERTER VOA/A RF_C IC301 VOB/B RF_B VOC/C RF_A (Page 23) ASDATA0 1 SDATA AOUT-L DVD_L_OUT VOD/D RF_D ACLK 4 MCLK AOUT-R R-CH VOE/E+G RF_F... -
Page 22: Block Diagram - Audio Input Section
HCD-SLK1i/SLK2i 4-2. BLOCK DIAGRAM - AUDIO INPUT Section - CN1003 (iPod Dock) iPod LINE AMP LINE-OUT-L IC612 LINE-OUT-R R-CH VBUS iPod+5V 11 USBB VBUS 13 USBB D+ USB D+ USB D– 14 USBB D– WAKE UP Acc PWR 33 iPod Acc Power Q402 AUDIO D/A CONVERTER... -
Page 23: Block Diagram - Audio Output Section
HCD-SLK1i/SLK2i 4-3. BLOCK DIAGRAM - AUDIO OUTPUT Section - A/D CONVERTER, DIGITAL AUDIO PROCESSOR DIGITAL POWER AMP IC300 IC500 TB601 (Page 21) DVD_L_OUT 60 LINEIN7L PWM3_RD 8 4 INPUT_A OUT_A L.P.F. OUT_A FRONT L PWM3_RI 9 5 INPUT_B OUT_B L.P.F. OUT_B OVER LOAD (Page 22) -
Page 24: Block Diagram - Video Section
HCD-SLK1i/SLK2i 4-4. BLOCK DIAGRAM - VIDEO Section - DISPLAY CONTROLLER IC401 (2/2) J701 LCD901 VIDEO AMP LIQUID CRYSTAL DVD VIDEO OUT IC603 DISPLAY MODULE VIDEO SELECTOR LCD R0 - LCD R7 DR0 - 7 IC602 (Page 21) CVBS 12 D3 (DVD) VIDEO A/D CONVERTER IC605 VIDEO AMP... -
Page 25: Block Diagram - Panel, Power Supply Section
LED DRIVE PVDD D908 A. STBY LED AUTO Q265 B+ SWITCH AD-LINE_PULL-UP Q198, 199 STANDBY AD-SWTICH 100 D901, 902 LED DRIVE SONYLOGO LED /AC-CUT (SONY LOGO) Q901 RESET RESET SIGNAL SWITCH RESET AC-DET GENERATOR Q202 Q201 AMBIENT PHOTO LIGHT DIODE... - Page 26 HCD-SLK1i/SLK2i THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS. • Circuit Boards Location (In addition to this, the necessary note is printed in each block.) For Printed Wiring Boards. For Schematic Diagrams. KEY-LEFT board IP board Note: Note: •...
-
Page 27: Schematic Diagram - Display Section (1/7)
HCD-SLK1i/SLK2i 4-6. SCHEMATIC DIAGRAM - DISPLAY Section (1/7) - • See page 50 for Waveforms. • See page 50 for IC Block Diagrams. • See page 55 for IC Pin Function Description. DISPLAY BOARD (1/7) DISPLAY BOARD (2/7) (Page 28) FB414 FB415 FB416... -
Page 28: Schematic Diagram - Display Section (2/7)
HCD-SLK1i/SLK2i 4-7. SCHEMATIC DIAGRAM - DISPLAY Section (2/7) - (Page 37) (Page 37) BOARD BOARD CN903 CN904 (Page 27) DISPLAY BOARD (1/7) DISPLAY BOARD (2/7) CN406 CN407 DISPLAY BOARD (1/7) (Page 27) FB406 R546 M1_A3 C438 JR501 C471 C433 R575 0.047 IC404 SD-RAM... -
Page 29: Schematic Diagram - Display Section (3/7)
HCD-SLK1i/SLK2i 4-8. SCHEMATIC DIAGRAM - DISPLAY Section (3/7) - • See page 50 for IC Block Diagrams. DISPLAY BOARD (3/7) CN604 JL641 R779 R778 JL705 DVD_OUT JL706 DVD_GND R681 C679 JL703 JL619 IC602 VIDEO_IN IC B/D JL702 VIDEO_GND JACK VIDEO SELECTOR R861 R685 BOARD... -
Page 30: Schematic Diagram - Display Section (4/7)
HCD-SLK1i/SLK2i 4-9. SCHEMATIC DIAGRAM - DISPLAY Section (4/7) - • See page 50 for Waveforms. • See page 50 for IC Block Diagrams. DISPLAY BOARD (4/7) L611 L605 22uH L604 22uH (Page 28) DISPLAY R885 BOARD C664 (3/7) C671 C662 C661 R674 (Page 29) -
Page 31: Schematic Diagram - Display Section (5/7)
HCD-SLK1i/SLK2i 4-10. SCHEMATIC DIAGRAM - DISPLAY Section (5/7) - • See page 50 for Waveforms. • See page 50 for IC Block Diagrams. • See page 55 for IC Pin Function Description. MAIN TOUCH PANEL BOARD (Page 48) BOARD (3/4) CN104 (5/7) DISPLAY BOARD... -
Page 32: Schematic Diagram - Display Section (6/7)
HCD-SLK1i/SLK2i 4-11. SCHEMATIC DIAGRAM - DISPLAY Section (6/7) - (6/7) DISPLAY BOARD TRK- TRK+ FCS+ R251 LIMITSW REG02 REG01 FCS- R234 IOPMON R231 R230 R221 C206 R224 0.033 100k R225 CL201 100k VREFO1.4V C208 0.033 R226 C205 4700p DVDD5V R220 SPFG GNDM C217... -
Page 33: Schematic Diagram - Display Section (7/7)
HCD-SLK1i/SLK2i 4-12. SCHEMATIC DIAGRAM - DISPLAY Section (7/7) - • See page 50 for IC Block Diagrams. (7/7) DISPLAY BOARD IC301 IC B/D AUDIO D/A CONVERTER IC301 CS4335-KSZR R311 SDATA ASDATA0 AOUT-L JL306 SCLK ABCK R315 FB308 FB309 LRCK ALRCK MCLK ACLK AOUT-R... -
Page 34: Printed Wiring Board - Display Section (1/2)
HCD-SLK1i/SLK2i 4-13. PRINTED WIRING BOARD - DISPLAY Section (1/2) - • See page 26 for Circuit Boards Location. • : Uses unleaded solder. (SUFFIX-12) (SUFFIX-11) (Page 45) (Page 43) MAIN BOARD MAIN BOARD CN104 CN104 DISPLAY BOARD (COMPONENT SIDE) R754 C730 CN412 R861... -
Page 35: Printed Wiring Boards - Display Section (2/2)
HCD-SLK1i/SLK2i 4-14. PRINTED WIRING BOARDS - DISPLAY Section (2/2) - • See page 26 for Circuit Boards Location. • : Uses unleaded solder. (SUFFIX-12) (SUFFIX-11) (SUFFIX-12) (SUFFIX-11) (SUFFIX-12) (SUFFIX-11) (Page 45) (Page 43) (Page 45) (Page 43) (Page 45) (Page 43) (Page 38) TOUCH PANEL MAIN BOARD... -
Page 36: Printed Wiring Board - Lcd Board
R906 C922 Q901 CN904 CN903 R907 D902 R964 R965 R904 CN901 JR902 C934 JR901 C903 C901 D901, 902 C909 R913 (SONY LOGO) C910 R924 C911 C912 R916 C913 LCD901 C914 LIQUID C915 CRYSTAL C916 R928 C902 DISPLAY C917 MODULE C918... -
Page 37: Schematic Diagram - Lcd Board
AGND 1.2k VDNA R917 R929 C917 3.3k 3.9k DRVBLU DRV_BLU R905 CABC_EN R906 CHDU D901, 902 R938 R928 C916 R907 (SONY LOGO) CHLR R904 EXT_GAMMA R912 R964 NAVDD R937 C915 NAVDD 7.5k C903 D901 D902 CL-270S-WS-SD-TS CL-270S-WS-SD-TS R936 R926 C914... -
Page 38: Printed Wiring Boards - Audio In/Out Section
HCD-SLK1i/SLK2i 4-17. PRINTED WIRING BOARDS - AUDIO IN/OUT Section - • See page 26 for Circuit Boards Location. • : Uses unleaded solder. TB601 SPEAKERS HP BOARD HP BOARD TERMINAL BOARD TERMINAL BOARD (COMPONENT SIDE) (CONDUCTOR SIDE) (COMPONENT SIDE) – –... -
Page 39: Schematic Diagram - Audio In/Out Section
HCD-SLK1i/SLK2i 4-18. SCHEMATIC DIAGRAM - AUDIO IN/OUT Section - • See page 50 for IC Block Diagrams. HP BOARD TERMINAL BOARD JACK BOARD JL713 R708 CN611 IC242 A702 L662 JL709 J701 REMOTE CONTROL RECEIVER FRONT L+ MAIN (CHASSIS) JL711 R711 DVD VIDEO OUT IC242 BOARD... -
Page 40: Printed Wiring Boards - Key Section
HCD-SLK1i/SLK2i 4-19. PRINTED WIRING BOARDS - KEY Section - • See page 26 for Circuit Boards Location. • : Uses unleaded solder. KEY RIGHT BOARD KEY RIGHT BOARD (COMPONENT SIDE) (CONDUCTOR SIDE) > JL292 TUNER – TUNER + S263 S262 S264 S267 S265... -
Page 41: Schematic Diagram - Key Section
HCD-SLK1i/SLK2i 4-20. SCHEMATIC DIAGRAM - KEY Section - KEY RIGHT BOARD R266 R270 R280 R274 R284 R275 R285 1.5k D267 D264 D265 D266 CL-270SYG-C-TS SML-A12D8TT86R SML-A12D8TT86R SML-A12D8TT86R PLAY PAUSE TIMER AUTO STANDBY KEY LEFT BOARD CN261 CN262 CN263 JL261 JL283 Q262 Q263 Q264... -
Page 42: Printed Wiring Board - Main Board (Component Side) (Suffix-11)
HCD-SLK1i/SLK2i 4-21. PRINTED WIRING BOARD - MAIN Board (Component Side) (SUFFIX-11) - • See page 26 for Circuit Boards Location. • : Uses unleaded solder. MAIN BOARD (COMPONENT SIDE) R964 D604 Q601 D602 R956 D600 Q916 Q613 R949 R951 R626 R962 R953 R621... -
Page 43: Printed Wiring Board - Main Board (Conductor Side) (Suffix-11)
HCD-SLK1i/SLK2i 4-22. PRINTED WIRING BOARD - MAIN Board (Conductor Side) (SUFFIX-11) - • See page 26 for Circuit Boards Location. • : Uses unleaded solder. MAIN BOARD (CONDUCTOR SIDE) (Page 35) (Page 35) SWR1 (AC IN) SWITCHING DISPLAY BOARD DISPLAY BOARD REGULATOR CN602 CN301... -
Page 44: Printed Wiring Board - Main Board (Component Side) (Suffix-12)
HCD-SLK1i/SLK2i 4-23. PRINTED WIRING BOARD - MAIN Board (Component Side) (SUFFIX-12) - • See page 26 for Circuit Boards Location. • : Uses unleaded solder. MAIN BOARD (COMPONENT SIDE) R964 D604 Q601 D602 R956 D600 Q916 Q613 R949 R951 R626 R962 R953 R621... -
Page 45: Printed Wiring Board - Main Board (Conductor Side) (Suffix-12)
HCD-SLK1i/SLK2i 4-24. PRINTED WIRING BOARD - MAIN Board (Conductor Side) (SUFFIX-12) - • See page 26 for Circuit Boards Location. • : Uses unleaded solder. MAIN BOARD (CONDUCTOR SIDE) (Page 35) (Page 35) SWR1 (AC IN) SWITCHING DISPLAY BOARD DISPLAY BOARD REGULATOR CN602 CN301... -
Page 46: Schematic Diagram - Main Board (1/4)
HCD-SLK1i/SLK2i 4-25. SCHEMATIC DIAGRAM - MAIN Board (1/4) - • See page 50 for IC Block Diagrams. MAIN BOARD (1/4) Q620 2SC3052EF-T1-LEF PROTECT DETECT ET501 JL671 R672 C650 R673 100k 0.22 ET502 C556 C555 R564 R555 (CHASSIS) R669 Q606-609 100k OVER LOAD DETECT R670... -
Page 47: Schematic Diagram - Main Board (2/4)
HCD-SLK1i/SLK2i 4-26. SCHEMATIC DIAGRAM - MAIN Board (2/4) - • See page 50 for Waveforms. • See page 55 for IC Pin Function Description. MAIN BOARD (2/4) 00_HP-5V 1_HP_MUTE 1_HP_MUTE 2_HP_DET 2_HP_DET 4_SIRCS 4_SIRCS 68_ST-TUNED MAIN 68_ST-TUNED BOARD 69_ST-CE (3/4) 69_ST-CE 70_ST-DOUT (Page 48) -
Page 48: Schematic Diagram - Main Board (3/4)
HCD-SLK1i/SLK2i 4-27. SCHEMATIC DIAGRAM - MAIN Board (3/4) - • See page 50 for Waveforms. • See page 55 for IC Pin Function Description. MAIN BOARD (3/4) 54_PROTECT_AMP 54_PROTECT_AMP 73_/SD 73_/SD 56_FR/CLIP IC150 56_FR/CLIP 55_READY 55_READY EEPROM 53_/OTW2 53_/OTW2 IC150 52_/OTW1 MAIN BR24S16F-WE2... -
Page 49: Schematic Diagram - Main Board (4/4)
HCD-SLK1i/SLK2i 4-28. SCHEMATIC DIAGRAM - MAIN Board (4/4) - • See page 50 for IC Block Diagrams. MAIN BOARD (4/4) IC B/D IC901 +12V REGULATOR IC901 SI-8008TFEK CN900 AC-DET PVDD PROTECT D+12V MAIN P.CONT FL900 R933 R939 BOARD JL900 JR900 P-GND AC IN SWR1... - Page 50 HCD-SLK1i/SLK2i • Waveforms • IC Block Diagrams IC004 MM1661JHBE – DISPLAY Board – – MAIN Board – – DISPLAY Board – 8 7 6 5 IC001, 007 TK11133CSCL-G IC401 <xz/ (OSCOUT) IC300 ih (XTAL_OUT) THERMAL BIAS SHUTDOWN OVER HEAT & DRIVER OVER CURRENT PROTECTION...
- Page 51 HCD-SLK1i/SLK2i IC602 TC74LVX4051FT IC603, 604 MM1671XNRE CLAMP 6 VCC 5 GND 75 ohm 6 dB LOW-PASS 4 IN DRIVER FILTER IC605 TVP5150AM1PBSR 32 31 30 29 27 26 25 24 VSYNC/PALI SYNC PROCESSOR 23 FID/GLCO 22 SDA HOST PROCESSOR INTERFACE 21 SCL 20 DVDD MACROVISION...
- Page 52 HCD-SLK1i/SLK2i IC606 AK4388AET-E2 16 DZF 15 DEM 14 VDD CLOCK DE-EMPHASIS MCLK DIVIDER CONTROL 13 VSS 12 VCOM BICK AOUTL INTERPOLATOR MODULATOR AUDIO SDTI DATA INTERFACE LRCK 10 AOUTR INTERPOLATOR MODULATOR RSTN SMUTE CONTROL ACKS PORT DIF0 9 DIF1 IC610 MM3404A18URE CE 1 BIAS VOLTAGE...
- Page 53 HCD-SLK1i/SLK2i – MAIN Board – IC500 TAS5616PHD GND_A GND_D PVDD_A PVDD_D PVDD_A PVDD_D OUT_A OUT_D OUT_A OUT_D BST_A BST_D GATE GATE GATE GATE DRIVE DRIVE DRIVE DRIVE GVDD_A GVDD_D GVDD_B GVDD_C TIMING TIMING TIMING TIMING CONTROL CONTROL CONTROL CONTROL CONTROL CONTROL CONTROL CONTROL...
- Page 54 HCD-SLK1i/SLK2i IC900, 902 SI-8001FFEK OVERCURRENT ON/OFF PREG PROTECTION SOFT START LATCH OSCILLATOR RESET & DRIVER COMPARATOR – THERMAL PROTECTION – ERROR AMP REFERENCE VOLTAGE IC901 SI-8008TFEK OVERCURRENT ON/OFF PREG PROTECTION SOFT START LATCH OSCILLATOR RESET & DRIVER COMPARATOR – THERMAL PROTECTION –...
- Page 55 HCD-SLK1i/SLK2i • IC Pin Function Description DISPLAY BOARD IC005 (RF AMP, SERVO DSP, DVD/CD DECODER) CXD9970R (LE) (SLK1i: US and Canadian models)/CXD9971R (LE) (Except SLK1i: US and Canadian models) Pin No. Pin Name Description RF_A RF main beam (A) input from the optical pick-up block RF_B RF main beam (B) input from the optical pick-up block RF_C...
- Page 56 HCD-SLK1i/SLK2i Pin No. Pin Name Description RWE# Write enable signal output to the SD-RAM CAS# Column address strobe signal output to the SD-RAM RAS# Row address strobe signal output to the SD-RAM Bank address signal output to the SD-RAM DVSS18 Ground terminal Bank address signal output to the SD-RAM 81 to 83...
- Page 57 HCD-SLK1i/SLK2i DISPLAY BOARD IC401 AML6226D (AUDIO DSP, DISPLAY CONTROLLER) Pin No. Pin Name Description USBA_ID Not used USBA_VBUS VBUS (for USB connectior) detection signal input terminal USB VDD3.3 Power supply terminal (+3.3V) USBA_D+ Two-way USB data (+) bus with the USB connector USBA_D–...
- Page 58 HCD-SLK1i/SLK2i Pin No. Pin Name Description VDD1.2 Power supply terminal (+3.3V) M1 SCS0 n Chip select signal output to the SD-RAM 76, 77 M1 BA0 n, M1 BA1 n Bank address signal output to the SD-RAM DVSS Ground terminal M1 A10, 79 to 83 Address signal output to the SD-RAM M1 A3 to M1 A0...
- Page 59 HCD-SLK1i/SLK2i Pin No. Pin Name Description LCD SCL(SPI) Serial data transfer clock signal output to the liquid crystal display module LCD DCLK Data clock signal output to the liquid crystal display module LCD HSYNC Horizontal sync signal output to the liquid crystal display module LCD DE Data enable signal output to the liquid crystal display module LCD VSYNC...
- Page 60 Busy signal output to the servo DSP TP_BUZZER Buzzer signal output terminal XIFCS Chip select signal output to the servo DSP SONYLOGO LED LED drive signal output terminal for SONY logo indicator “H”: LED on IIC-CLK Two-way I2C clock bus terminal Not used IIC-DATA...
- Page 61 HCD-SLK1i/SLK2i Pin No. Pin Name Description LED drive signal output terminal for ON/STANDBY indicator STBY-LED “L”: red LED on (STANDBY), “H”: green LED on (ON) P.CONT Power on/off control signal output to the switching regulator “H”: power on FAN-CONTROL Fan motor drive signal output terminal “H”: motor on Power supply terminal (+3.3V) PROTECT FAN...
- Page 62 HCD-SLK1i/SLK2i MAIN BOARD IC300 CXD9926ATQ (A/D CONVERTER, DIGITAL AUDIO PROCESSOR) Pin No. Pin Name Description DVDD_PWM2 Power supply terminal (+3.3V) Not used PWM2_RD, 2, 3 Digital audio signal output terminal Not used PWM2_RI 4, 5 PWM3_LD, PWM3_LI Digital audio (R-ch) signal output to the digital power amplifi er DVSS_PWM3 Ground terminal DVDD_PWM3...
- Page 63 HCD-SLK1i/SLK2i Pin No. Pin Name Description LINEIN8R Analog audio (R-ch) signal input from the iPod and USB connector AVDD_LI3 Power supply terminal (+3.3V) LINEIN9L Analog audio (L-ch) signal input from the AUDIO IN jack LINEIN9R Analog audio (R-ch) signal input from the AUDIO IN jack AVSS_LI2 Ground terminal LINEIN10L...
-
Page 64: Exploded Views
HCD-SLK1i/SLK2i SECTION 5 EXPLODED VIEWS Note: • -XX and -X mean standardized parts, so • Color Indication of Appearance Parts Ex- : Korean model they may have some difference from the ample: : Mexican model original one. KNOB, BALANCE (WHITE) . . . (RED) : Singapore model ↑... -
Page 65: Switching Regulator Section
HCD-SLK1i/SLK2i 5-2. SWITCHING REGULATOR SECTION Note: This illustration sees the set from rear side. not supplied not supplied SWR1 (US, CND) not supplied DISPLAY board section not supplied not supplied MAIN board section Ref. No. Part No. Description Remark Ref. No. Part No. -
Page 66: Main Board Section
HCD-SLK1i/SLK2i 5-3. MAIN BOARD SECTION M601 not supplied not supplied not supplied not supplied (JACK board) not supplied (US, CND, AEP, CH, not supplied not supplied (TERMINAL board) not supplied not supplied not supplied not supplied not supplied not supplied not supplied Ref. -
Page 67: Display Board Section
HCD-SLK1i/SLK2i 5-4. DISPLAY BOARD SECTION Note: This illustration sees the set from rear side. front panel section DVD mechanism deck section (CDM86B-DVBU101) (US, CND, AEP, CH, KR) not supplied not supplied not supplied not supplied not supplied not supplied not supplied not supplied not supplied (US, CND) -
Page 68: Front Panel Section
BUTTON (PLAY) ( Z , B , X , x , . , > , –, +) X-2548-695-1 PANEL (SERVICE) ASSY, FRONT (SLK1i: US) X-2549-562-1 ORNAMENT (CDM) ASSY 4-168-692-01 INDICATOR (SONY LOGO) 4-168-691-01 BUTTON (I/ 1 ) 1-400-932-11 FILTER, CLAMP X-2548-687-1... -
Page 69: Dvd Mechanism Deck Section (Cdm86B-Dvbu101)
HCD-SLK1i/SLK2i 5-6. DVD MECHANISM DECK SECTION (CDM86B-DVBU101) (including MS-214 board) not supplied (MS-214 board) not supplied (including sled motor, spindle motor) spindle motor sled motor not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-1114-646-A MD (AU) ASSY (including MS-214 board) 3-087-599-01 INSULATOR SCREW... -
Page 70: Electrical Parts List
HCD-SLK1i/SLK2i SECTION 6 DISPLAY ELECTRICAL PARTS LIST Note: • Due to standardization, replacements in • CAPACITORS : Mexican model the parts list may be different from the uF: μF : Singapore model parts specifi ed in the diagrams or the com- •... - Page 71 HCD-SLK1i/SLK2i DIPLAY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C209 1-162-970-11 CERAMIC CHIP 0.01uF C438 1-128-994-21 ELECT CHIP 47uF C210 1-162-970-11 CERAMIC CHIP 0.01uF C441 1-162-919-11 CERAMIC CHIP 22PF C211 1-162-964-11 CERAMIC CHIP 0.001uF C442 1-162-910-11 CERAMIC CHIP 5PF 0.25PF 50V...
- Page 72 HCD-SLK1i/SLK2i DISPLAY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C625 1-107-826-11 CERAMIC CHIP 0.1uF C688 1-100-354-21 ELECT CHIP 220uF 6.3V C626 1-107-826-11 CERAMIC CHIP 0.1uF C689 1-128-994-21 ELECT CHIP 47uF C627 1-124-779-00 ELECT CHIP 10uF C690 1-128-994-21 ELECT CHIP...
- Page 73 HCD-SLK1i/SLK2i DISPLAY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark FB021 1-469-324-21 FERRITE, EMI (SMD) (2012) CN301 1-779-993-11 PIN, CONNECTOR (PWB) 5P FB301 1-469-324-21 FERRITE, EMI (SMD) (2012) CN302 1-784-865-51 CONNECTOR, FFC (LIF (NON-ZIF)) 13P FB304 1-469-324-21 FERRITE, EMI (SMD) (2012) CN401...
- Page 74 HCD-SLK1i/SLK2i DISPLAY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark IC005 6-714-819-01 IC CXD9971R (LE) R006 1-216-833-11 METAL CHIP 1/10W (SLK1i: AEP, E3, EA, SP, KR, TH, CH/SLK2i) IC005 6-714-820-01 IC CXD9970R (LE) (SLK1i: US, CND) R007 1-216-809-11 METAL CHIP...
- Page 75 HCD-SLK1i/SLK2i DISPLAY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R076 1-216-864-11 SHORT CHIP R402 1-216-829-11 METAL CHIP 4.7K 1/10W R077 1-216-827-11 METAL CHIP 3.3K 1/10W R403 1-216-864-11 SHORT CHIP R079 1-216-864-11 SHORT CHIP R404 1-216-821-11 METAL CHIP 1/10W R080...
- Page 76 HCD-SLK1i/SLK2i DISPLAY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R488 1-216-809-11 METAL CHIP 1/10W R582 1-216-295-91 SHORT CHIP R489 1-216-809-11 METAL CHIP 1/10W R583 1-216-809-11 METAL CHIP 1/10W R490 1-216-809-11 METAL CHIP 1/10W R584 1-216-809-11 METAL CHIP 1/10W R491...
- Page 77 HCD-SLK1i/SLK2i DISPLAY Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R677 1-216-797-11 METAL CHIP 1/10W R780 1-216-295-91 SHORT CHIP R678 1-216-864-11 SHORT CHIP R786 1-216-864-11 SHORT CHIP R679 1-216-864-11 SHORT CHIP R795 1-216-864-11 SHORT CHIP R680 1-216-797-11 METAL CHIP 1/10W...
- Page 78 HCD-SLK1i/SLK2i DISPLAY JACK Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R904 1-216-845-11 METAL CHIP 100K 1/10W C1006 1-165-989-11 CERAMIC CHIP 10uF 6.3V C1007 1-100-597-91 CERAMIC CHIP 0.1uF < COMPOSITION CIRCUIT BLOCK > C1008 1-165-989-11 CERAMIC CHIP 10uF 6.3V RB001 1-242-963-21...
- Page 79 HCD-SLK1i/SLK2i JACK KEY-LEFT KEY-RIGHT Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < JACK > < RESISTOR > J701 1-774-227-41 JACK, PIN 1P (DVD VIDEO OUT) R264 1-216-821-11 METAL CHIP 1/10W J702 1-842-106-11 JACK (VIDEO/SAT VIDEO IN) R265 1-216-821-11 METAL CHIP...
- Page 80 < LED > R943 1-216-829-11 METAL CHIP 4.7K 1/10W R944 1-216-829-11 METAL CHIP 4.7K 1/10W * D901 6-502-466-01 LED CL-270S-WS-SD-TS (SONY LOGO) * D902 6-502-466-01 LED CL-270S-WS-SD-TS (SONY LOGO) R945 1-216-835-11 METAL CHIP 1/10W R946 1-216-830-11 METAL CHIP 5.6K 1/10W <...
- Page 81 HCD-SLK1i/SLK2i MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C199 1-126-382-11 ELECT 100uF C382 1-162-970-11 CERAMIC CHIP 0.01uF C200 1-165-908-11 CERAMIC CHIP 1uF C383 1-112-746-11 CERAMIC CHIP 4.7uF 6.3V C201 1-126-157-11 ELECT 10uF C384 1-107-826-11 CERAMIC CHIP 0.1uF C202 1-119-941-91...
- Page 82 HCD-SLK1i/SLK2i MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C555 1-100-566-91 CERAMIC CHIP 0.1uF C935 1-100-597-91 CERAMIC CHIP 0.1uF C556 1-100-566-91 CERAMIC CHIP 0.1uF C558 1-136-175-00 FILM 0.68uF C936 1-107-826-11 CERAMIC CHIP 0.1uF (SLK2i) C937 1-162-964-11 CERAMIC CHIP 0.001uF C939...
- Page 83 HCD-SLK1i/SLK2i MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark D905 6-502-489-01 DIODE RK46LF-T1 D906 6-502-489-01 DIODE RK46LF-T1 < TRANSISTOR > D907 6-502-489-01 DIODE RK46LF-T1 D908 6-502-961-01 DIODE DA2J10100L Q103 8-729-620-07 TRANSISTOR 2SC3052EF-T1-LEF Q104 8-729-038-23 TRANSISTOR RT1N141C-TP-1 D909 8-719-058-24...
- Page 84 HCD-SLK1i/SLK2i MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R118 1-216-809-11 METAL CHIP 1/10W R198 1-216-829-11 METAL CHIP 4.7K 1/10W (SLK1i) R120 1-216-833-11 METAL CHIP 1/10W R121 1-216-833-11 METAL CHIP 1/10W R198 1-216-864-11 SHORT CHIP 0 (SLK2i) R122 1-216-833-11...
- Page 85 HCD-SLK1i/SLK2i MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R377 1-216-833-11 METAL CHIP 1/10W R602 1-216-809-11 METAL CHIP 1/10W (SLK1i) R603 1-216-809-11 METAL CHIP 1/10W R378 1-216-864-11 SHORT CHIP R606 1-216-864-11 SHORT CHIP R380 1-216-813-11 METAL CHIP 1/10W R607...
- Page 86 HCD-SLK1i/SLK2i MAIN MS-214 TERMINAL TOUCH PANEL Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R927 1-218-855-11 METAL CHIP 2.2K 0.5% 1/10W R928 1-211-981-11 METAL CHIP 0.5% 1/10W MS-214 BOARD ************ R929 1-211-985-11 METAL CHIP 0.5% 1/10W R930 1-218-835-11 METAL CHIP...
- Page 87 HCD-SLK1i/SLK2i Ref. No. Part No. Description Remark MISCELLANEOUS ************** 1-469-829-11 CORE, FERRITE (AEP, CH, KR) 0 51 1-829-387-11 CORD, POWER (AR) 0 51 1-834-288-12 CORD, POWER (TH) 0 51 1-834-965-22 CORD, POWER (US, CND) 0 51 1-834-966-21 CORD, POWER (AEP, E2, E3, E51, SP) 0 51 1-835-078-21 CORD, POWER-SUPPLY (EA)
-
Page 88: Revision History
HCD-SLK1i/SLK2i REVISION HISTORY Checking the version allows you to jump to the revised page. Also, clicking the version at the top of the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2010.06...