When installing the speakers on a wall
Caution
• Contact a screw shop or installer for information regarding the wall material or screws to be used.
• Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach
the screws securely to a beam. Install the speakers on a vertical and flat wall where reinforcement is applied.
• Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength or
improper screw installation, natural calamity, etc.
Before installing the tall speaker on a wall
(DAV-DZ810 only)
You cannot install the tall square-type speaker with the lower part attached. Be sure to remove the
lower part of the tall square-type speaker before installing the tall square-type speaker on a wall.
1
Pull out the speaker cord from the slot of the rear of the speaker.
Speaker cord
Rear of the speaker
2
Disconnect the speaker cords from the speaker.
,
Rear of the speaker
23
GB