Sony Corporation. (Applicable in Use of this copyright the European protection technology must be “PLAYSTATION” is a Union and other European authorized by Macrovision, trademark of Sony Computer countries with separate and is intended for home and Entertainment Inc. collection systems)
• The system is compatible FROM A VIDEO PROVIDER with the S-AIR function, “S-AIR” and its logo are LICENSED BY MPEG LA TO which allows transmission of trademarks of Sony PROVIDE MPEG-4 VIDEO. sound between S-AIR Corporation. NO LICENSE IS GRANTED products wirelessly (DAV-...
Table of Contents Settings Precautions..........2 About These Operating Instructions ..3 Changing the Brightness of the Front Playable Discs/Files on a USB Panel Display........69 Device..........5 Setting the Demonstration Mode to Package Contents ........10 On/Off ..........69 Index to Parts and Control ....
Playable Discs/Files on a USB Device Type Disc logo Characteristics Icon DVD VIDEO • DVD VIDEO • DVD-R/DVD-RW in DVD VIDEO format or video mode • DVD+R/DVD+RW in DVD VIDEO format VR (Video • DVD-R/DVD-RW in VR (Video Recording) mode Recording) mode (except for DVD-R VIDEO CD •...
Page 6
Type Disc logo Characteristics Icon USB device – • USB device that contains the following kinds of files. 2)3) – MP3 files or WMA/AAC files – JPEG image files – DivX/MPEG4 video files A logical format of files and folders on CD-ROMs, defined by ISO (International Organization for Standardization).
Page 7
Note that some playback functions may not work with some DVD+RWs/DVD+Rs, even if they have been correctly finalized. In this case, view the disc by normal playback. Also some DATA CDs/DATA DVDs created in Packet Write format cannot be played. Notes about Multi Session CD •...
Page 8
The system will attempt to play any data with the extensions above, even if it is not in MP3/WMA/ AAC/JPEG/DivX/MPEG4 format. Playing this data may generate a loud noise which could damage your speaker system. • The following can increase the time it takes to start playback: –...
Page 9
• The playback order for the system may differ from the playback order of the connected USB device. • Always turn off the system before removing the USB device. Removing the USB device while the system is on may corrupt the data on the USB device. •...
Index to Parts and Control For more information, refer to the pages indicated in parentheses. Front panel A Disc tray Opens or closes the disc tray. B Front panel display (page 13) N (play) Starts or re-starts playback. (remote sensor) Receives the remote signal.
Front panel display A Karaoke indicator G Surround format indicator H HDMI indicator Lights up when the karaoke mode is on. B SLEEP indicator Lights up when a signal is established between a TV and the unit via HDMI. Flashes when the sleep timer is set. I NIGHT indicator C System status display Lights up when the night mode is on.
Rear panel ANTENNA SPEAKERS SUR R SUR L COAXIAL 75 EZW-T100 DIGITAL AUDIO IN VIDEO FRONT R FRONT L SUBWOOFER CENTER OPTICAL COMPONENT VIDEO OUT SPEAKERS Screws* A SPEAKERS jacks (page 29) G VIDEO OUT jack (page 30) B HDMI OUT jack (page 30) H COMPONENT VIDEO OUT jacks (page 30) C TV (DIGITAL IN OPTICAL) jack (DAV-...
Page 15
DVD VIDEO. About the operation of the supplied remote ANGLE (page 42) You can operate this system and a Sony TV with Switches to other viewing angles when the supplied remote. multi-angles are recorded on a DVD VIDEO.
Page 16
D SOUND MODE (page 57) H DVD TOP MENU (page 43) Selects the sound mode. Opens or closes the DVD’s Top Menu. DYNAMIC BASS (page 57) DVD MENU (page 43) Reinforces bass frequencies. Opens or closes the DVD’s menu. NIGHT (page 57) C/X/x/c Activates the night mode function.
Page 17
To insert the batteries Insert two R6 (size AA) batteries (supplied) by matching the 3 and # ends on the batteries to the markings inside the compartment. Note • Do not leave the remote in an extremely hot or humid place.
Guide to the Control Menu You can use the Control Menu to select a function and to view related information. DISPLAY Press DISPLAY while using the “DVD/CD” or “USB” function. Each time you press DISPLAY, the Control Menu changes: 1 t 2 t 3 t 1 t ... 1 Control Menu 1 2 Control Menu 2 (appears when available) 3 Control Menu off...
Control Menu Example: Control Menu 1 when playing a DVD VIDEO. Currently playing title number Currently playing chapter number Total number of titles Playback status Total number of chapters (N Playback, Control Menu items X Pause, x Stop, etc.) 98( 99) Type of source being 13( 99) DVD VIDEO...
Page 20
[PROGRAM] (page 44) You can select the track to play in the order you want. [SHUFFLE] (page 45) You can play the tracks/files in random order. [REPEAT] (page 46) You can play the entire disc/USB device (all titles/all tracks/all folders/all files) repeatedly or one title/chapter/track/folder/file repeatedly.
Page 21
List of Control Menu Items for karaoke Item Item Name, Function, Relevant Source [KARAOKE MODE] (page 47) Set karaoke mode to on/off. [VOCAL SELECT] (page 49) Selects different kind of vocals recorded in the disc. • The Control Menu icon indicator lights up in yellow when you select any item except [OFF] ([PROGRAM], [SHUFFLE], [REPEAT], [A/V SYNC], [KARAOKE MODE], and [VOCAL SELECT] only).
• Use caution when placing the speakers and/or speaker stands attached to the speakers on a specially treated (waxed, oiled, polished, etc.) floor, as staining or discoloration may result. Assembling the speakers (DAV-DZ310/DAV-DZ610/DAV-DZ810 only) For assembling the speakers refer to “Speaker Installation Guide” (supplement).
Page 23
Install the speakers on a vertical and flat wall where reinforcement is applied. • Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc.
Page 24
Remove the screw (pre-installed) at the rear of the speaker. Screw Rear of the speaker Lift the upper part of the speaker. Upper part of the speaker Upper part Lower part Rear of the speaker Pull out the speaker cord from the bottom of the lower part of the speaker. The removed speaker cord is used when installing the speaker on a wall.
Page 25
Remove the protection paper from the speaker-bottom cover, then attach the speaker- bottom cover to the bottom of the upper part of the speaker. Bottom of the upper part of the speaker Speaker-bottom cover Protection paper Note • When removing the protection paper, pull it off via the section exposed by the notch in the speaker-bottom cover. To hang the speaker on a wall For DAV-DZ510, you can select the speaker hanging method.
Page 26
For the center speaker For the small speakers (DAV-DZ310/ DAV- DZ510/DAV-DZ610 only) 145 mm inches) For the tall square-type speakers (DAV- For the tall round pole-type speakers DZ810 only) (DAV-DZ610/DAV-DZ810 only) 101.6 mm 210 mm (4 inches) inches) To install the front and surround speakers on a wall using the wall...
Page 27
Remove the cover from the mounting bracket, pass the speaker cord through the hole on the rear side of the mounting bracket and out from the front side of the bracket, then connect the speaker cord to the speaker. Color tube Front left speaker (L): White Front right speaker (R): Red Surround left speaker (L): Blue...
Page 28
After deciding the angle, secure a screw on the lower side (1), then secure a screw on the upper side (2). Note • Make sure that the wall is sufficiently thick before installing. • Do not loosen the screws at the mounting plate or screw to secure the speaker to the mounting bracket during the assembly process.
Step 2: Connecting the System Connecting the speakers Insert the connectors of the speaker cords to match the color of the SPEAKERS jacks of the unit until they click. Gray (Surround right speaker (R)) K E R S S P E A S U R S U R Blue...
Page 30
Connecting your TV/set-top box When connecting to a TV only When connecting to a TV and set-top box Video 2 Audio 1 Video 1 Video 2 Audio 1 Connecting the video to your TV Depending on the jacks on your TV, select one of the connection methods. x Method 1: Video cord (supplied) connection This is the basic connection.
Page 31
2 Connecting the audio from your TV/set-top box To listen to TV or set-top box sound via the system, select one of the connection methods. x Method 1: Audio cord (not supplied) connection This is the basic connection and sends an analog audio signal. x Method 2: Digital optical cord (not supplied) connection (DAV-DZ510/DAV-DZ610/DAV- DZ810 only) Sound quality will be improved compared to Method 1.
To change the color system (PAL or NTSC) (Asian, Australian, Middle Eastern, and South African models only) Depending on your TV, you may be required to select either PAL or NTSC for the color system. The initial setting for Australian, Middle Eastern, and South African models is PAL. The initial setting for Asian models is NTSC.
Page 33
Connecting the antenna (aerial) N N A A N T E IA L 7 C O A X FM wire antenna (aerial) (supplied) Note • After connecting the FM wire antenna (aerial), extend and keep it as horizontal as possible. Connecting the AC power cord (mains lead) Connect the AC power cord (mains lead).
this message still does not appear, recall the Step 3: Setting up the Quick Setup display (page 69). Press X/x to select a language, then System press LANGUAGE SETUP OSD: ENGLISH Performing the Quick Setup MENU: ENGLISH AUDIO: FRENCH SPANISH SUBTITLE: Displayed items vary depending on the area.
Page 35
Press C/c to select the speaker Connect the calibration mic (supplied) formation image as the speakers are to the A.CAL MIC jack on the front actually positioned, then press panel. Set up the calibration mic at ear level using a tripod, etc. (not supplied). SPEAKER FORMATION The front of each speaker should face the calibration mic, and there should be no...
Page 36
Unplug the calibration mic, press C/c Press X/x to select [HDMI SETUP], then to select [YES], then press press To quit the Quick Setup HDMI SETUP Press DISPLAY in any Step. HDMI RESOLUTION: AUTO (1920x1080p) CONTROL FOR HDMI: VOLUME LIMIT: AUDIO RETURN CHANNEL: AUTO Setting the type of video...
Page 37
To select the type of video signal Press X/x to select [PROGRESSIVE (COMPONENT OUT)], then press output from the COMPONENT VIDEO OUT jacks VIDEO SETUP When you connect the unit and your TV with a TV TYPE: 16:9 PROGRESSIVE component video cable, select the type of video (COMPONENT OUT) 4:3 OUTPUT: FULL...
Press VOLUME +/– to adjust the volume. Playback Playing a Disc Playing Files on a Disc/ USB Device FUNCTION "/1 FUNCTION VOLUME +/– C/X/x/c, DVD MENU VOLUME +/– RETURN DISPLAY Press FUNCTION repeatedly to select “DVD/CD.” The selected item appears in the front panel Press FUNCTION repeatedly to select display.
Page 39
To select the playback source of Load the source. the USB device x For a disc You can select the memory number for playback Place a disc on the tray by pressing Z to depending on the USB device. open/close the disc tray. Press MEMORY SELECT.
Page 40
x For JPEG files When different file types are Press C/X/x/c to select an image on a disc/USB device You can select the file type that is played with priority when mixed media (audio files, JPEG image files, or video files) are on the disc/USB device.
Press Other Playback X, then press Play one frame at a STEP or time (Freeze STEP. Operations Frame) • STEP: go to the preceding frame. • STEP: go to the next frame. Playback operation buttons on Replay the previous during playback. the remote scene or briefly fast •...
Press X/x to select the search method, Input the time code using the number then press buttons, then press • [TITLE/SCENE/TRACK] For example, to find a scene at 2 hours, 10 minutes, and 20 seconds after the • [CHAPTER/INDEX] beginning: press 2, 1, 0, 2, 0 ([2:10:20]). •...
Page 43
Example: Using the DVD’s menu Dolby Digital 5.1 channel LFE (Low Frequency Effect) Surround (L/R) When you play a DVD which contains several titles, you can select the title you want using 1: ENGLISH DOLBY DIGITAL 3 / 2 .1 DVD TOP MENU.
• [CD]: You can play the CD layer. Selecting a playback area for a When the system is playing a CD layer, “CD” lights up in the front panel display. Super Audio CD Note • Super Audio CD audio signals are not output from the HDMI OUT jack.
Press c. Follow Step 5 of “Playing in programmed order” for new The cursor moves to the track row [T] (in programming. this case, [01]). To cancel a program, select [--] under [T], then press PROGRAM 0: 00:00 ALL CLEAR To cancel all of the tracks in the –...
To return to normal playback To return to normal playback Press CLEAR, or select [OFF] in Step 3. Press CLEAR, or select [OFF] in Step 3. Note Note • You cannot use Shuffle Play with a VIDEO CD or • You cannot use Repeat Play with a VIDEO CD or Super VCD with PBC playback.
• If you play a large MP3 file and JPEG image file at the same time, the sound may skip. Sony • [NORMAL]: You can set to the standard recommends that you set the MP3 bit rate to 128 kbps duration.
– lower the overall volume. Note • The Control Menu will not appear if no disc/ USB device is inserted into the unit. Changing the key of a song Press X/x repeatedly to select (Key Control) [KARAOKE MODE], then press Press X/x to select [ON], then press To cancel karaoke mode You can change the key to suit your vocal range,...
Page 49
Selecting the vocals (Vocal About karaoke DVDs recorded Select) in Dolby Digital format When playing a karaoke DVD recorded in On karaoke DVDs recorded in Dolby Digital Dolby Digital format in karaoke mode, you can format, guide melody and guide vocal tracks are turn on or off the guide vocal recorded in the recorded in addition to the accompaniment.
2.3. Displaying the ID3 ver 2.2/2.3 tag information display has priority when both ID3 ver 1.0/1.1 and ver Information of a Disc/ 2.2/2.3 tags are used for a single MP3 file. USB Device 5 Text information The DVD/Super Audio CD/CD text appears only when text is recorded on the disc.
x DATA CD/DATA DVD/USB device (audio Enjoying the Audio/Video file) 1 Playing time and current track number of the Connected 2 Track (file) name* * If an MP3 file has an ID3 tag, the system will Component display a title name from the ID3 tag information. The system can support ID3 ver 1.0/1.1/2.2/2.3.
Page 52
• You cannot transfer songs onto the iPod. remote by connecting the iPod via the (USB) • Sony cannot accept responsibility in the event that port to the system. data recorded to iPod is lost or damaged when using The battery of the iPod is charged via the an iPod connected to this unit.
Press SYSTEM MENU. To change the preset number Tuner Select the desired preset number by pressing Presetting Radio PRESET +/– (page 53), then perform the procedure from Step 3. Stations You can preset 20 FM stations. Listening to the Radio Current station Current band and preset number Preset radio stations in the system’s memory...
Page 54
Press X/x to select “MONO.” • “STEREO”: Stereo reception. • “MONO”: Monaural reception. Press Press SYSTEM MENU.
Sound Effect Enjoying Surround Sound You can enjoy surround sound simply by selecting one of the system’s pre-programmed surround settings. Enjoying TV sound with the 5.1 channel surround sound effect Press SYSTEM MENU. Press X/x to select “SUR.SETTING,” then press or c.
Page 56
Sound from Surround setting Effect “PRO LOGIC” • 2 channel source: The system simulates surround sound from 2 channel sources and outputs sound from all the “PLII MOVIE” speakers. “PLII MUSIC” – “PRO LOGIC” performs Dolby Pro Logic decoding. – “PLII MOVIE” performs Dolby Pro Logic II movie mode decoding.
Reinforcing bass frequencies Selecting the Sound Effect Press DYNAMIC BASS. “D. BASS ON” appears in the front panel display. Selecting the effect to suit the To turn off the sound effect source Press DYNAMIC BASS again. Press SOUND MODE repeatedly during Enjoying the sound at low playback until the desired mode appears in the front panel display.
This function is available on TVs with the your TV. “BRAVIA” Sync function. For details of the setting of your TV, refer By connecting Sony components that are to the operating instructions of your TV. compatible with the Control for HDMI function On the system, press FUNCTION with an HDMI cable, operation is simplified as repeatedly to select “DVD/CD.”...
Page 59
Watching a DVD by a single • You can also operate the System Audio Control button press function via the TV menu. • You can operate the volume and mute control of the system via the TV remote. (One-Touch Play) Press ONE-TOUCH PLAY Limiting the volume level of TV Your TV turns on, your TV’s function is set to...
Changing the language for the Room A S-AIR main unit system’s on-screen display in sync with your TV (Language Follow) When you change the language for the on-screen display of your TV, the system’s on-screen S-AIR sub unit display language is also changed. (surround amplifier) Note •...
Page 61
Note • Remove the screws that are indicated in the • When you change the S-AIR configuration, Sony illustration. Do not remove other screws. recommends that you perform [AUTO CALIBRATION] (page 74). Insert the wireless transmitter. Rear of the unit...
Page 62
To set the ID of the surround Identifying the unit with a amplifier specific S-AIR sub unit Refer to the operating instructions of the surround amplifier. (Pairing operation) To set the ID of the S-AIR For the surround amplifier receiver For the S-AIR receiver Refer to the operating instructions of the S-AIR receiver.
Press X/x to select the desired setting, instrument, such as a paper clip, can be then press used.) The PAIRING indicator of the surround • “AUTO”: Normally select this. The amplifier flashes when pairing starts. system changes “RF CHANGE” to “ON” or “OFF”...
Page 64
Notes on USB transferring Selected memory number • Do not connect the unit and the USB device through a USB hub. • Make sure there is enough space in the USB USB Memory 2 selected. device for transferring. Home Theatre System •...
Page 65
x For an audio CD A new file is transferred in the “REC1-MP3” or “REC1-CD” folder each time single-track Remaining space of the USB device transferring is performed. USB TRANSFER Transferring tracks on an TRACK START TRACK audio CD or MP3 files on a TRACK TRACK TRACK...
Press N to start transferring. Erasing audio files on a USB When transferring is completed, device “COMPLETE” appears in the front panel display and playback of the disc and USB device stops automatically. You can erase audio files (“.mp3,” “.wma,” or To cancel transferring, press x.
To cancel the sleep timer Enjoying Multiplex Press SLEEP repeatedly until “SLEEP OFF” appears in the front panel display. Broadcast Sound To set the sleep timer using the system menu (DUAL MONO) You can enjoy multiplex broadcast sound when Press SYSTEM MENU. the system receives or plays a Dolby Digital Press X/x to select “SLEEP,”...
Page 68
Press X/x to select a setting, then press • “ATT ON”: You can attenuate the input level. • “ATT OFF”: Normal input level. This setting is made separately for each function. Press SYSTEM MENU.
Reperforming the Quick Settings Setup Changing the Brightness of the Front Panel Press FUNCTION repeatedly to select “DVD/CD.” Display The selected item appears in the front panel display. Press SYSTEM MENU. Press DISPLAY while the system is in stop mode. Press X/x to select “DIMMER,”...
Press X/x to select an item, then press Performing Further The options for the selected item appear. Settings Example: [TV TYPE] VIDEO SETUP You can make various adjustments to items such TV TYPE: 16:9 as picture and sound. PROGRESSIVE 16:9 (COMPONENT OUT) 4:3 LETTER BOX 4:3 OUTPUT:...
[4:3 PAN SCAN]: Select this when you connect x [AUDIO] a 4:3 standard TV. The system automatically You can switch the language of the sound track. displays a wide picture on the entire screen and When you select [ORIGINAL], the language cuts off the portions that do not fit.
Page 72
[OFF]: You can set the black level of the output signal to the standard level. [ON]: You can raise the standard black level. Use this when the picture becomes too black. 16:9 aspect ratio TV x [PAUSE MODE] Note (DVD VIDEO/DVD-R/DVD-RW only) •...
[AUDIO (HDMI)] not be able to install some speakers. For better You can select the audio output status from the surround sound, Sony recommends that first you HDMI OUT jack. decide the position of the speakers. Press C/c to select a setting, then...
Page 74
• [NO SURROUND]: Select this when you install the center and front speakers only. • [FRONT ONLY]: Select this when you install the front speakers only. • [ALL FRONT]: Select this when you install all the speakers in front of the listening position.
[JACKET PICTURE]: The jacket picture (still x [AUDIO DRC] picture) appears, but only when the jacket You can compress the dynamic range of the picture is already recorded on the disc (CD- sound track. [AUDIO DRC] is useful for EXTRA, etc.). If the disc does not contain a watching movies at low volume late at night.
enter a new 4-digit password, replace the disc in the [ON]: The system stores the resume points in unit and press N. When the display for entering your memory for up to 10 discs. password appears, enter your new password. [OFF]: The system does not store the resume points in memory.
Page 77
[SUBWOOFER] x [LEVEL (FRONT)] [YES] You can adjust the sound level of the front Note speakers, center speaker, and subwoofer. You • When you change the [CONNECTION] setting, the can set the parameters from –6.0 dB to 0 dB for [STANDARD] of [SPEAKER FORMATION] [L/R], and from –6.0 dB to +6.0 dB for setting remains the same, but the other settings of...
If you have any questions or problems concerning your system, please consult your nearest Sony dealer. On placement On cleaning discs, disc/lens • Place the system in a location with adequate ventilation to prevent heat build-up in the system.
Notes about the Discs On handling discs • To keep the disc clean, handle the disc by its edge. Do not touch the surface. • Do not stick paper or tape on the disc. • Do not expose the disc to direct sunlight or heat sources such as hot air ducts, or leave it in a car parked in direct sunlight as the temperature may rise considerably inside the...
Note that if service personnel changes some parts during repair, these parts may be retained. When you install the S-AIR sub unit (not supplied), in the event of a problem with the S-AIR function, have a Sony dealer check the entire system together (main unit and S-AIR sub unit). (DAV-DZ810 only)
Page 81
Symptom Problems and solutions There is no picture when you • You have set progressive format but your TV cannot accept the signal in make a component video cable progressive format. In this case, return the setting to interlace format (the connection.
Symptom Problems and solutions The sound loses stereo effect • Select stereo sound by pressing AUDIO (page 42). when you play a VIDEO CD, a CD, or an audio file. There is no sound or the volume • Check the surround setting (page 55). level is very low from a certain •...
Symptom Problems and solutions File names are not displayed • The character codes that can be displayed by this system are numbers and letters properly. of the alphabet only. Other characters are not displayed correctly. USB playback Symptom Problems and solutions •...
Page 84
USB device becomes complex. Follow the procedure in the operating instructions of the USB device to format the USB device. If the problem persists, contact your nearest Sony dealer. • The USB device is full. • The number of audio files and folders on the USB device has reached the upper limit.
(USB) port. Make sure there is no problem with the USB device. If this display pattern persists, contact your nearest Sony dealer. “LOCKED” appears and a disc • Contact your Sony dealer or local authorized Sony service facility. cannot be ejected. “DATA ERROR” appears.
[VER.X.XX] (X is a number) may Input Stream: Dolby appear on the TV screen. Although this is not a Digital 5.1ch/DTS 5.1ch/ malfunction and for Sony service use only, Linear PCM 2ch normal system operation will not be possible. (Sampling Frequency: less...
Page 87
Intermediate frequency 10.7 MHz Mass (approx.) 0.6 kg Video Section Surround Outputs VIDEO: 1 Vp-p 75 ohms DAV-DZ310/DAV-DZ610 (SS-TS102) COMPONENT: Speaker system Full range Bass reflex Y: 1 Vp-p 75 ohms Speaker unit 65 mm cone type : 0.7 Vp-p...
Page 88
Other models: 220 V - 240 V AC, Design and specifications are subject to change 50/60 Hz without notice. Power consumption DAV-DZ310/DAV-DZ510/DAV-DZ610 • Standby power consumption On: 170 W Taiwan models: 0.2 W Standby: Taiwan models: Other models: 0.25 W 0.2 W*, Other models:...
Playback Priority of File Types The table below describes the playback priority of file types under the [MEDIA] setting. File type on a disc or USB [MEDIA] setting device [VIDEO] [MUSIC/ [PHOTO] [MUSIC] PHOTO] Disc USB device Disc Disc/USB Disc/USB device device Video files only...
Language Code List The language spellings conform to the ISO 639: 1988 (E/F) standard. Code Language Code Language Code Language Code Language 1027 Afar 1183 Irish 1347 Maori 1507 Samoan 1028 Abkhazian 1186 Scots Gaelic 1349 Macedonian 1508 Shona 1032 Afrikaans 1194 Galician 1350 Malayalam 1509 Somali...