Removing A 2.5-Inch Hdd / Ssd Module - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Hide thumbs Also See for PRIMERGY TX300 S7:

Table of Contents

Hard disk drives / solid state drives

In order to permanently remove an operational HDD module that is part of a

RAID array from the server, you first need to delete the array using

ServerView RAID Manager.

All data on all HDDs / SSDs in the array will be lost! Be sure to back

up your data before deleting a RAID array.

For further information, please refer to the "ServerView Suite RAID

Management" user guide, available online at

(http://jp.fujitsu.com/platform/server/primergy/manual/

market) or from the ServerView Suite DVD 2 supplied with your PRIMERGY

Ê When working on a tower server, open the HDD bay cover as described in

"Removing accessible drive and HDD bay covers" on page

Removing a 2.5-inch HDD / SSD module

Figure 102: Disconnecting a 2.5-inch HDD / SSD module

Upgrade and Maintenance Manual

http://manuals.ts.fujitsu.com

for the Japanese

TX300 S7 / RX350 S7

Primergy tx350 s7