6. Insert the memory module into the connector on the computer. Press
7. Push the module down so that it lies flat and is secured by two
Do not touch the connectors on the memory module or on the computer.
Debris on the connectors may cause memory access problems.
8. Seat the cover and secure it with one screw.
9. When you turn the computer on, it should automatically recognize the
Downloaded from LpManual.com Manuals
User's Manual
the module carefully and firmly to ensure a solid connection.
latches.
Figure 8-8 Inserting the memory module
Figure 8-9 Pushing the memory module down
total memory capacity. Use the HW Setup program to verify that the
added memory is recognized. If it is not recognized, check the mod-
ule's connection.
Optional Devices
8-9