General
This window displays the BIOS version and contains two buttons: Default
and About.
Default
About
Setup
This field displays the installed BIOS version and date.
Password
User Password
This option allows you to set or reset the user password for power on.
Not Registered
Registered
To enter a user password:
1. Select Registered to display the following prompt:
2. Click the OK button. The following message appears, allowing you to
3. If character strings match, the password is registered click OK button.
Downloaded from LpManual.com Manuals
User's Manual
Enter Password:
Enter a password of up to 10 characters. The character string you
enter is displayed as a string of asterisks. For example, if you enter a
password consisting of four characters, the display is shown as:
Enter Password: ****
verify the password.
Verify Password:
If they do not match, the following message appears. You must repeat
from step 1.
Entry Error!!!
Returns all HW Setup values to the factory
settings.
Displays the HW Setup version.
Changes or remove the password. (Default)
Sets the password. A dialogue box will appear to
allow you to set the password.
HW Setup and Passwords
7-2