Working Environment - Toshiba mini NB200 series User Manual
Hide thumbs
Also See for mini NB200 series:
- Maintenance manual (202 pages) ,
- User manual (143 pages) ,
- Manual del usuario (204 pages)
Table of Contents
Advertisement
CE compliance
This product is labelled with the CE Mark in accordance with the related
European Directives, notably Electromagnetic Compatibility Directive
2004/108/EC for the notebook and the electronic accessories including the
supplied power adapter, the Radio Equipment and Telecommunications
Terminal Equipment Directive 1999/5/EC in case of implemented
telecommunication accessories and the Low Voltage Directive 2006/95/EC
for the supplied power adapter. This product and the original options are
designed to observe the related EMC (Electromagnetic Compatibility) and
safety standards. However, TOSHIBA cannot guarantee that this product
still observes these EMC standards if options or cables not produced by
TOSHIBA are connected or implemented. In this case the persons who
have connected/implemented those options/cables have to provide
assurance that the system (PC plus options/cables) still fulfils the required
standards. To avoid general EMC problems, the following guidance should
be noted:
■
Only CE marked options should be connected/implemented
■
Only best shielded cables should be connected
Working environment
This product was designed to fulfil the EMC (Electromagnetic Compatibility)
requirements to be observed for so-called "Residential, commercial and
light industry environments". TOSHIBA do not approve the use of this
product in working environments other than the above mentioned
"Residential, commercial and light industry environments". For example,
the following environments are not approved:
■
Industrial Environments (e.g. environments where a mains voltage of
380 V three-phase is used)
■
Medical Environments
■
Automotive Environments
■
Aircraft Environments
Any consequences resulting from the use of this product in working
environments that are not approved are not the responsibility of TOSHIBA.
The consequences of the use of this product in non-approved working
environments may be:
■
Interference with other devices or machines in the near surrounding
area.
■
Malfunction of, or data loss from, this product caused by disturbances
generated by other devices or machines in the near surrounding area.
Therefore TOSHIBA strongly recommend that the electromagnetic
compatibility of this product should be suitably tested in all non-approved
working environments before use. In the case of automobiles or aircraft, the
manufacturer or airline respectively should be asked for permission before
use of this product.
Furthermore, for general safety reasons, the use of this product in
environments with explosive atmospheres is not permitted.
User's Manual
TOSHIBA mini NB200 series
iv
Advertisement
Table of Contents
