Replacement Procedures
Installing MAIN HDD-H9.5mm / HDD-H12.5 mm
The following describes the procedure for installing the main HDD.
1. Install a HDD to the HDD holder and secure it with the following screws.
• M3.0×3.5F
NOTE: Although they are 3mm head screws, screw torque must be set in 2.5kg-cm for
four screws securing the HDD holder.
2. Insert the HDD assembly into the HDD slot and connect it carefully to the MAIN
HDD on the system board.
3. Secure the HDD assembly with the following screw.
• M2.5×4.0B
Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08)
FLAT BIND screw
FLAT BIND screw
x4
x2
4-15