Replacement Procedures
3. Pull out one insulator and peel off the other one adhered to the inverter.
4. Disconnect the LCD harnesses from the connectors CN1 on the inverter.
5. Disconnect the HV harnesses from the connectors CN2 on the inverter.
6. Remove the FL inverter while peeling off the double-sided tape.
Insulator
CN2
HV harness
Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08)
Double-sided tape
Figure 4-17-2 Remove the inverter
CN1
Inverter
LCD harness
4-54