Toshiba TECRA A9 Series Maintenance Manual page 226
Hide thumbs
Also See for TECRA A9 Series:
- Maintenace manual (406 pages) ,
- User manual (258 pages) ,
- Resource manual (52 pages)
Table of Contents
Advertisement
3.30 BIOS SETUP
(c) SATA Controller Mode
This feature sets the SATA Controller Mode.
AHCI
Compatibility
12. PCI Bus
This item displays the interrupt level for the Card Bus. It is for information only and
cannot be changed.
PCI BUS = IRQ10, IRQ11
13. Display
This group of options configures the computer's display.
(a) Power On Display
This option is used to select the display when booting up.
Auto-Selected
LCD+AnalogRGB
NOTE: Pressing Fn+F5 changes the display setting in the order of internal LCD to
simultaneous to external monitor.
14. Peripheral
Use this option to select the parallel port mode and hard disk mode.
(a) Internal Pointing Device
This option enables and disables the Dual Point.
Enabled
Disabled
TECRA A9(S5/P5/S200) Maintenance Manual (960-633)
Sets AHCI which is the mode for VistaTM (default)
Sets the mode for legacy OS. Use this mode when the
driver corresponding to AHCI is not used.
Selects an external monitor if one is connected.
Otherwise it selects the internal LCD. (Default)
Selects both the internal LCD and the external monitor
for simultaneous display.
Enables the Dual Point. (Default)
Disables the Dual Point.
3 Tests and Diagnostics
[CONFIDENTIAL]
3-101
- Quick Links:
- Hardware Overview
- Rtc Battery
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
