Toshiba TECRA A9 Series Maintenance Manual page 119
Hide thumbs
Also See for TECRA A9 Series:
- Maintenace manual (406 pages) ,
- User manual (258 pages) ,
- Resource manual (52 pages)
Table of Contents
Advertisement
2 Troubleshooting Procedures
Procedure 4
Connector Check and Replacement Check
The Fingerprint sensor cable is connected to the connector CN9650 on the Fingerprint sensor
board and connector CN9550 on the system board.
Check 1
Check the Fingerprint sensor cable is firmly connected to the connector CN9650
on the Fingerprint sensor board and connector CN9550 on the system board. If
not, connect it firmly. If the Fingerprint sensor is still not functioning properly,
perform Check 2.
Check 2
The Fingerprint sensor cable may be faulty. Replace it with a new one. If the
problem persists, perform Check 3.
Check 3
The Fingerprint sensor board may be faulty. Replace it with a new one. If the
problem persists, perform Check 4.
Check 4
The system board may be faulty. Replace it with a new one.
2-68
[CONFIDENTIAL]
TECRA A9(S5/P5/S200) Maintenance Manual (960-633)
2.16 Fingerprint sensor Troubleshooting
- Quick Links:
- Hardware Overview
- Rtc Battery
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
