Toshiba Satellite P500 Maintenance Manual page 104
Personal computer
Hide thumbs
Also See for Satellite P500:
- Maintenance manual (288 pages) ,
- User manual (227 pages) ,
- Resource manual (60 pages)
Table of Contents
Advertisement
Test Program for Field.
NOTES: The Item2 and 3 of Test Parameter are not used by some tests.
Go To Test
Move the highlight bar to Go To Test and press Enter to start executing the test.
Test Loop
Select NO to return the screen to the subtest menu after the test is complete.
Select YES to set the test to run continuously until it is halted by the user.
Error Stop
Select NO to keep the test running even if an error is found.
Select YES to stop the test program when an error is found and display the HALT
OPERATION screen as shown below:
[[ HALT OPERATION ]]
1: Test end
2: Continue
3: Retry
These three selections have the following functions:
1: Terminates the test program and exits to the subtest menu.
2: Continues the test from the error.
3: Restarts the test from the beginning.
Use the arrow keys to move the cursor to the desired option and press Enter.
Table 3-1 in Section 3.3 lists the function of each test on the subtest menu. Table 3-2 in
Section 3.15 lists the error codes and error status for each error.
Satellite P500 and Satellite Pro P500 Tests and Diagnostics Manual
7
- Quick Links:
- Rtc Battery
- Disassembly Procedure
- System Board
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
