Replacement Procedures
4.9
Wireless LAN card
Removing a Wireless LAN card
The following describes the procedure for removing a Wireless LAN card (See Figure 4-9-1
to 4-9-2).
1. Remove the following screw of wireless cover securing wireless LAN card cover
and remove it. And remove screw of wireless board
• 2.5.0 x 4.0B
2. Disconnect the wireless LAN antenna cable from the connectors on a wireless LAN
card
3. Open the left and right latches holding a wireless LAN card and remove a wireless
LAN card from the connector on the system board.
Satellite P500 and Satellite Pro500 Maintenance Manual (960-Q08)
BIND screw
Figure 4-9-1 Wireless LAN card
4-28
x3