Table of Contents
Advertisement
332
The Diagnostic Test
Test Sequence
Hard Disk
If the diskette drive(s) test is successful and you selected the hard
disk drive test, the hard disk test displays this message:
HARD DISK TEST IN PROGRESS 805100
If an error occurs, the test displays the ABORTED message. Write
down all messages and highlighted numbers and consult your
dealer. Your computer or your drive may need service. To return
to the main menu, press
The hard disk test does not destroy all of the information
stored on the hard disk. However, this test overwrites a small
portion of the disk. Back up any important files before you
test the hard disk.
If the test completes successfully, and you selected the printer
test, the diagnostic test begins the printer test. If you did not
select the printer test, the hard disk test concludes by displaying
the TDIAGS screen. To exit TDIAGS, go to "Exiting the Diagnos-
tic Menus" on page 334.
Printer
If the hard disk drive tests successfully and you selected to test the
printer, the printer test displays this message:
PRINTER TEST IN PROGRESS 60xxxx
where xxxx is a counter that shows the test is still in progress. If
you specified an IBM-compatible printer, the test sends the fol-
lowing output to the printer:
PRINTER TEST
1. THIS LINE SHOWS NORMAL PRINT.
2.
THIS LINE SHOWS DOUBLE WIDTH PRINT.
3. THIS LINE SHOWS COMPRESSED PRINT.
4. THIS LINE SHOWS EMPHASIZED PRINT.
5. THIS LINE SHOWS DOUBLE STRIKE PRINT.
6. ALL CHARACTERS PRINT
IBM-compatible printer output
Part II: Technical Reference
.
Enter
Advertisement
Chapters
Table of Contents
