Replacement Procedures
4. Pull out one insulator and peel off the other one adhered to the FL inverter.
5. Disconnect the LCD harnesses from the connectors CN1 on the FL inverter.
6. Disconnect the HV harnesses from the connectors CN2 on the FL inverter.
7. Remove the FL inverter while peeling off the double-sided tape.
Insulator
CN2
HV harness
Insulator (adhered)
4-52
Double-sided tape
Figure 4-32
Removing the FL inverter
CN1
FL inverter
Satellite P100 Maintenance Manual (960-Q02)
LCD harness