Test Mode - Sony STR-DA5000ES Service Manual
Fm stereo fm/am receiver
Hide thumbs
Also See for STR-DA5000ES:
- Operating instructions manual (101 pages) ,
- Easy setup manual (2 pages) ,
- Technical background (38 pages)
Table of Contents
Advertisement
STR-DA5000ES
Ver 1.1
TUNER FACTORY PRESET MODE
All preset contents are reset to the default setting.
Procedure:
[SURR BACK DECODING]
1. While pressing the
SET TUNING --]
buttons, press the
main power.
2. The message "TUNER FACTORY PRESET" appears and the
present contents are reset to the default values.
TUNER AM STEP CHANGE (9 kHz/10 kHz) MODE
Either the 9 kHz step or 10 kHz step can be selected for the AM
channel step.
Procedure:
[PRESET TUNING +]
1. While pressing the
ton, press the
button to turn on the main power.
I/1
2. Either the message "AM 9K STEP" or "AM 10K STEP" ap-
pears. Select the desired step.
TUNER AUTOBETICAL TUNING MODE
Procedure:
[MEMORY/ENTER]
1. While pressing the
button to turn on the main power.
I/1
2. The message "Autobetical select" appears and scans and stores
all the FM and FM RDS stations in the broadcast area.
3. When done, the message "FINISH" appears.
SOUND FIELD CLEAR MODE
The preset sound field is cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
[MUSIC]
1. While pressing the
turn on the main power.
2. The message "S. F. Initialize" appears and initialization is per-
formed.
ALL CLEAR MODE
All preset contents are cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
[INPUT MODE]
1. While pressing the
buttons, press the
button to turn on the main power.
I/1
2. The message "MEMORY CLEARING..." appears and the
memories are reset to the default values.
3. When done, the message "MEMORY CLEARED!" appears.
VOLUME CHECK MODE
Procedure:
[2CH]
1. While pressing the
press the
button to turn on the main power.
I/1
[DISPLAY]
2. Press the
button.
3. The message "–oodB" appears. (Volume level is "MIN")
[DISPLAY]
4. Press the
button once again.
5. The message "–57.5dB" appears. (Volume level is "MID")
[DISPLAY]
6. Press the
button once again.
7. The message "0.0dB" appears. (Volume level is "MAX")
[DISPLAY]
8. Press the
button once again.
9. The message "MUTING" appears. (Muting on)
[DISPLAY]
10. Press the
button once again.
11. The message "MUTING OFF" appears. (Muting off)
14
SECTION 4
TEST MODE
[PRE-
and
button to turn on the
I/1
[DISPLAY]
or
button, press the
button, press the
button to
I/1
[MEMORY/ENTER]
and
[MEMORY/ENTER]
and
buttons,
FLUORESCENT INDICATOR TUBE PATTERN
CHECK MODE
All fluorescent segments are tested. When this test is activated, all
segments turn on at the same time, then each segment turns on one
after another.
Procedure:
1. While pressing the
tons, press the
2. All segments and
LED turn on.
COMMAND MODE CHANGE MODE
The command mode of the remote-commander which this set re-
but-
ceives can be changed.
Procedure:
1. While pressing the
ton to turn on the main power.
2. Either the message "COMMAND MODE [AV1]" or "COM-
MAND MODE [AV2]" appears. Select the desired mode.
SF LOCK ON/OFF CHANGE MODE
Procedure:
1. While pressing the
press the
button to turn on the main power.
I/1
2. Either the message "SF LOCK [OFF]" or "SF LOCK [ON]"
appears.
SPECIAL MENU MODE
About the special menu mode, refer to SUPPLEMENT-1.
[DISPLAY]
[MEMORY/ENTER]
and
button to turn on the main power.
I/1
[MULTI CHANNEL DECODING]
[INPUT MODE]
button, press the
[MUSIC]
[MEMORY/CLEAR]
and
but-
indicator
but-
I/1
buttons,
Hide quick links:
Advertisement
Table of Contents
