Sony SLV-SE210B Service Manual
Hide thumbs
Also See for SLV-SE210B:
- Operating instructions manual (56 pages) ,
- Service manual (52 pages)
Table of Contents
Advertisement
Quick Links
SERVICE MANUAL
System
Channel coverage
PAL (I): (SLV-SE210G)
UHF B21 to B69
PAL (B/G)
(SLV-SE210B/SE210D/SX110B/
SX110A):
VHF E2 to E12
Italiens VHF A to H
UHF E21 to E69
CATV S01 to S05, S1 to S20
HYPER S21 to S41
SECAM (L)
(SLV-SE210B/SX110B):
VHF F2 to F10
UHF F21 to F69
CATV B to Q
HYPER S21 to S41
RF output signal
(SLV-SE210G/SE210D/SX110D)
UHF channels 21 to 69
Aerial out
75-ohm asymmetrical aerial socket
Tape speed
SP: PAL
23.39 mm/s
(recording/playback)
NTSC 33.35 mm/s
(playback only)
SECAM
(SLV-SE210B/SX110B)
23.39 mm/s
(recording/playback)
SLV-SE210B/SE210D/SE210G/
Photo: SLV-SE210
SPECIFICATIONS
MESECAM
(SLV-SE210B/SE210D/SX110B/
SX110D)
23.39 mm/s
(recording/playback)
LP: PAL (SLV-SE210G)
11.70 mm/s
(recording/playback)
NTSC (SLV-SE210G)
16.67 mm/s
(playback only)
Maximum recording/playback time
10 hrs. in LP mode (with E300 tape)
(SLV-SE210G)
5 hrs. in SP mode (with E300 tape)
Rewind time
Approx. 60 sec. (with E180 tape)
Inputs and outputs
AV1 (EURO AV)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
Video output: pin 19
Audio output: pins 1 and 3
AV2 IN (SLV-SE210B/SE210D)
21-pin
Video input: pin 20
Audio input: pins 2 and 6
SX110A/SX110B
RMT-V257D/V257E
France Model
Germany Model
North Europe Model
TS-10 MECHANISM
Refer to the SERVICE MANUAL of VHS
MECHANICAL ADJUSTMENT MANUAL
VII for MECHANICAL ADJUSTMENTS.
(9-921-790-11)
General
Power requirements
240 V: (SLV-SE210G)
230 V: (SLV-SE210B/SE210D/
SX110A/SX110B)
AC, 50 Hz
Power consumption
15 W
3 W (ECO. MODE is set to ON,
Standby mode)
Operating temperature
5 C to 40 C
Storage temperature
–20 C to 60 C
Dimensions
Approx. 360 94 255 mm (w/h/d)
including projecting parts and controls
Mass
Approx. 2.8 kg (SLV-SE210G)
Approx. 2.6 kg (SLV-SE210B/
SE210D/SX110A/SX110B)
Supplied accessories
Remote commander (1)
R6 (size AA) batteries (2)
Aerial cable (1)
PERITEL cable (1)
(SLV-SE210B/SX110B)
Design and specifications are subject to
change without notice.
VIDEO CASSETTE RECORDER
SLV-SE210B/SX110B
Italy Model
SLV-SE210D/SX110A
UK Model
SLV-SE210G
Advertisement
Table of Contents
Related Manuals for Sony SLV-SE210B
Summary of Contents for Sony SLV-SE210B
- Page 1 HYPER S21 to S41 Mass Inputs and outputs RF output signal Approx. 2.8 kg (SLV-SE210G) AV1 (EURO AV) (SLV-SE210G/SE210D/SX110D) Approx. 2.6 kg (SLV-SE210B/ 21-pin UHF channels 21 to 69 SE210D/SX110A/SX110B) Video input: pin 20 Aerial out Supplied accessories Audio input: pins 2 and 6...
- Page 2 COMPONENTS IDENTIFIED BY MARK ! OR DOTTED LINE WITH MARK ! ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB-LISHED BY SONY.
-
Page 3: Table Of Contents
TM-Block ..............4-11 Index of parts and controls ............1-1 4-6. OSD (VPS/PDC) ............4-13 Step 1: Unpacking ..............1-2 SECAM (SLV-SE210B/SX110B model) .....4-15 Step 2: Setting up the remote commander......1-2 4-8. Input-Output (2 Scart Jack) ......... 4-17 Step 3: Connecting the VCR ..........1-3 4-9. -
Page 4: Service Note
SERVICE NOTE 1. MODE SWITCH (PROGRAM SWITCH) ASSEMBLY POINT 1) When installing the ass’y deck on the Main PCB, be sure to align the assembly point of mode switch. ASSEMBLY POINT (ALIGN TWO ARROWS) Fig. 1 2. HOW TO EJECT THE CASSETTE TAPE (If the unit does not operate on condition that tape is inserted into housing ass’y) 1) Turn the Gear Worm Œ... -
Page 5: Eeprom Initialization And Discharging The Backup Capacitor
3. EEPROM INITIALIZATION AND DISCHARGING THE BACKUP CAPACITOR 3-1. NV-RAM (EEPROM) Initialization Clear the EEPROM Using the TEST Button on the JIG Remote Controller 1) Plug the VCR into the mains. Switch on the VCR by pressing (ON/STANDBY) on the remote controller. 2) Press (TEST) button on the JIG remote controller and released. -
Page 6: How To Troubleshoot
4. HOW TO TROUBLESHOOT Circuit board check jig Bracket-Handling: Part No. 3-067-793-01 How to use the jig: When you want to check the conductor side of the Main board, attch the jig first and the turn over the MD Ass’y and the Main board. BRACKET-HANDLING Assembly of Bracket-Handling –... - Page 7 BRACKET-HANDLING Twist – 7 –...
- Page 8 MEMO – 8 –...
-
Page 9: General
SLV-SE210B/SE210D/SE210G/SX110A/SX110B SECTION 1 This section is extracted from instruction manual. (SLV-SE210G model) GENERAL Getting Started Display window Index to parts and controls Refer to the pages indicated in parentheses ( ) for details. Front panel ATape indicator (35) CTimer indicator (33) (37) -
Page 10: Step 1: Unpacking
• Do not use different types of batteries together. [VIDEO] and point at the remote sensor at the VCR • Some buttons may not work with certain Sony TVs. the VCR [TV] and point at the remote sensor at the TV... -
Page 11: Step 3: Connecting The Vcr
If your TV has a Scart (EURO-AV) connector Step 3 : Connecting the VCR If your TV has a Scart (EURO-AV) connector, see page 13. IN FRONT ANT. If your TV does not have a Scart (EURO-AV) connector OUT TO TV (EURO AV) AERIAL IN Aerial cable (supplied) -
Page 12: Selecting A Language
Selecting a language Presetting channels If you prefer an on-screen language other than English, use the on-screen display to If some channels could not be preset using the Auto Set Up function, you can preset select another language. them manually. Before you start…... -
Page 13: Changing/Disabling Programme Positions
Press OK, then press M/m to move Changing/disabling programme positions to the desired programme position. TV STATION TABLE PLAY NAME After setting the channels, you can change the programme positions as you like. If – any programme positions are unused or contain unwanted channels, you can disable –... -
Page 14: Setting The Clock
Enter the station name. Setting the clock 1 Press M/m to select a character. MANUAL TUNING PLAY Each time you press M, the character You must set the time and date on the VCR to use the timer features properly. 0 3 3 changes as shown below. -
Page 15: Recording Tv Programmes
Notes Recording TV programmes • The counter resets to “00:00” whenever a tape is reinserted. • The counter stops counting when it comes to a portion with no recording. • Depending on your TV, the following may occur while playing an NTSC-recorded Before you start... -
Page 16: Recording Tv Programmes Using The Video Plus+ System
Press OK. Recording TV programmes using the The programme position, date, start PLAY 1 8 : 3 0 VIDEO Plus+ system and stop times, tape speed, and START STOP S A 2 9 – VPS/PDC setting appear on the TV –... -
Page 17: Setting The Timer Manually
Set the programme position, date, Setting the timer manually start and stop times, tape speed, and PLAY VPS/PDC function: 1 8 : 3 0 START STOP If VIDEO Plus+ is not available in your area, follow the instructions below to set the 1 Press , to select each item in –... -
Page 18: Setting The Recording Duration Time
Setting the recording duration time Checking/changing/cancelling timer settings After you have started recording in the normal way, you can have the VCR stop recording automatically after a specified duration. … Before you start Before you start... • Turn on your TV and set it to the video channel. •... -
Page 19: Changing Menu Options
Menu option Set this option to Changing menu options TIMER METHOD • VARIABLE to display the TIMER METHOD menu for selecting STANDARD or VIDEOPLUS when pressing Press MENU, then select USER SET or EASY OPERATION and press TIMER button. • STANDARD to display the TIMER menu when pressing the TIMER button. -
Page 20: Additional Information
(see page 45). cassette. If these cleaning cassettes are not available in not appear. your area, have the heads cleaned at your nearest Sony service facility (a standard service charge will be required). The VPS/PDC function • Check that the clock and the date are set correctly. -
Page 21: Cabinet Top
SLV-SE210B/SE210D/SE210G/SX110A/SX110B SECTION 2 DISASSEMBLY 2-1. Cabinet Top CABINET TOP Œ 2 SCREWS ´ Lift up the Cabinet Top in the direction of arrow by releasing the Hook. Fig. 2-1 Cabinet Top 2-2. Cover Bottom Œ RELEASE 2 SNAPFITS ´ Lift up the Bottom Cover in the direction of arrow. -
Page 22: Ass'y-Panel Front
2-3. Ass’y-Panel Front ´ RELEASE 3 HOOKS ASS'Y-PANEL FRONT Œ RELEASE 4 HOOKS (BOTTOM VIEW) (TOP VIEW) Fig. 2-3 Ass’y-Panel Front... -
Page 23: Ass'y Main-Pcb, Deck
2-4. Ass’y MAIN-PCB, DECK 2-5. Internal Views — Top View — ¨ FLAT CABLE ˆ FLAT CABLE ˇ 3 SCREWS CYLINDER Assembly (Drum) 1-763-706-11 (SE210B/SE210D/SX110A/SX110B) 1-763-707-11 (SE210G) ACE HEAD Assembly 1-500-698-11 Ø CONNECTOR ’ ASS'Y-DECK LOADING MOTOR Assembly 1-763-704-11 ” ASS'Y MAIN-PCB —... -
Page 24: Printed Wiring Boards
SLV-SE210B/SE210D/SE210G/SX110A/SX110B SECTION 3 PRINTED WIRING BOARDS 3-1. Main PCB COMPONENT SIDE... - Page 25 SLV-SE210B/SE210D/SE210G/SX110A/SX110B CONDUCTOR SIDE 3-4E...
-
Page 26: Schematic Diagrams
SLV-SE210B/SE210D/SE210G/SX110A/SX110B SECTION 4 SCHEMATIC DIAGRAMS Block Identification of Main PCB Component Side Conductor Side... -
Page 27: S.m.p.s
SLV-SE210B/SE210D/SE210G/SX110A/SX110B 4-1. S.M.P.S. Œ ´... -
Page 28: Power
SLV-SE210B/SE210D/SE210G/SX110A/SX110B 4-2. Power... -
Page 29: System Control/Servo
SLV-SE210B/SE210D/SE210G/SX110A/SX110B 4-3. System Control/Servo ” ∏ ˝ ˇ ¨ ˆ ’... -
Page 30: Audio/Video
SLV-SE210B/SE210D/SE210G/SX110A/SX110B 4-4. Audio/Video Æ ı Ú ˜ ¯ Ò Ô 4-10... -
Page 31: Tm-Block
SLV-SE210B/SE210D/SE210G/SX110A/SX110B 4-5. TM-Block ˘ 4-11 4-12... -
Page 32: Osd (Vps/Pdc)
SLV-SE210B/SE210D/SE210G/SX110A/SX110B 4-6. OSD (VPS/PDC) ¿ 4-13 4-14... -
Page 33: Secam (Slv-Se210B/Sx110B Model)
SLV-SE210B/SE210D/SE210G/SX110A/SX110B 4-7. SECAM (SLV-SE210B/SX110B model) 4-15 4-16... -
Page 34: Input-Output (2 Scart Jack)
SLV-SE210B/SE210D/SE210G/SX110A/SX110B 4-8. Input-Output (2 Scart Jack) 4-17 4-18... -
Page 35: Input-Output (1 Scart Jack)
SLV-SE210B/SE210D/SE210G/SX110A/SX110B 4-9. Input-Output (1 Scart Jack) 4-19 4-20... - Page 36 SLV-SE210B/SE210D/SE210G/SX110A/SX110B S.M.P.S. BLOCK SYSTEM CONTROL/SERVO BLOCK AUDIO/VIDEO BLOCK TM BLOCK O. S. D. BLOCK Œ Q1SR01-COLLECTOR ˇ IC601-3 ∏ IC610-8 Ô IC301-7/4 Æ IC301-74 ˘ TM401-24 ¿ IC6P01-19 POWER OFF/380Vp-p PB/5.1Vp-p PB/5.1V PB,REC/2Vp-p PB/300mVp-p REC/1.2Vp-p PB/2.1Vp-p ´ Q1SR01-COLLECTOR ¨ IC601-9 ”...
- Page 37 SLV-SE210B/SE210D/SE210G/SX110A/SX110B 4-23 4-24E...
-
Page 38: Alignment And Adjustment
SLV-SE210B/SE210D/SE210G/SX110A/SX110B SECTION 5 ALIGNMENT AND ADJUSTMENT 5-1. Reference 5-1-2. Test point location for adjustment mode setting 1) X-Point (Tracking center) adjustment, “Head switching adjustment” and “NVRAM option setting” can be adjusted with remote control. 2) When replacing the Micom (IC601) and NVRAM (IC605 ; EEPROM) be sure to adjust the “Head switching adjustment” and “NVRAM option setting”. -
Page 39: Mechanical Adjustment
5-2. Mechanical Adjustment Note : Refer to the Mechanical Manual for the adjustment and confirmation of Ass’y deck. 5-2-1. The number and position of test point Test point : TP601 (Control Pulse) TP602 (H’D S/W -Trigger) TP301 (Envelope) TP302 (Audio output) TP303 (Video output) AUDIO OUTPUT ENVELOPE... -
Page 40: Head Switching Point Adjustment
5-3. Head Switching Point Adjustment 1) Playback the alignment tape. 2) Press the “SW718” button on Main PCB to set the adjustment mode. (See Fig. 5-2 ) 3) Press the “SP/LP” button of remote control then adjustment is operated automatically. (See Fig. 5-1) 4) Turn the Power off. -
Page 41: Repair Parts List
SLV-SE210B/SE210D/SE210G/SX110A/SX110B SECTION 6 REPAIR PARTS LIST 6-1. Exploded Views NOTE: • The mechanical parts with no reference • -XX, -X mean standardized parts, so they Note: may have some differences from the original number in the exploded views are not The components identified by matk ! or one. -
Page 42: Mechanical Parts (Top Side)
6-1-2. Mechanical Parts (Top Side) G001 K490 not supplied G555 not supplied not supplied not supplied not supplied not supplied G510 not supplied G480 K546 K250 K240 K248 B575 B410 K350 not supplied B440 not supplied not supplied K340 not supplied not supplied G546 not supplied... -
Page 43: Mechanical Parts (Bottom Side)
6-1-3. Mechanical Parts (Bottom Side) G542 not supplied not supplied B560 not supplied not supplied not supplied supplied not supplied not supplied not supplied not supplied not supplied B570 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks B560 1-763-703-11 MOTOR-CAPSTAN... -
Page 44: Electrical Parts List
MAIN 6-2. Electrical Parts List NOTE: • RESISTORS • Due to standardization, replacements When indicating parts by reference number, in the parts list may be different from All resistors are in ohms. please include the board name. the parts specified in the diagrams or METAL: metal-film resistor Note: METAL OXIDE: Metal Oxide-film resistor... - Page 45 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C3A11 1-165-565-11 FILM PEF 0.039uF 100V C403 1-126-786-11 ELECT 47uF C3A12 1-126-786-11 ELECT 47uF C404 1-126-958-11 ELECT 0.33uF C3A13C 1-163-022-11 CERAMIC CHIP 0.0012uF 10% C405 1-119-943-11 ELECT 47uF C3A14C 1-163-019-11 CERAMIC CHIP 0.0068uF 10%...
- Page 46 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C6P06 1-165-568-11 FILM PEF 0.001uF < CONNECTOR > (SE210B/SE210D/SE210G) C6P07 1-126-794-11 ELECT 4.7uF CN1SS1 1-815-692-11 CONNECTOR HEADER 2P (SE210B/SE210D/SE210G) CN301 1-815-686-11 CONNECTOR FPC 6P C6P08C 1-163-006-11 CERAMIC CHIP 56pF CN3A01 1-815-688-11 CONNECTOR FPC 6P SN C6P10...
- Page 47 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < IC > < TRANSISTOR > 0 IC1SS1 1-804-44011 PHOTO COUPLER PS2501 Q1P101 1-804-424-11 TRANSISTOR KSC2328A-Y IC1SS2 1-804-445-11 IC KA431Z Q1P102 1-804-424-11 TRANSISTOR KSC2328A-Y IC301 1-804-433-11 IC LA71598M Q1P104 1-804-481-11 TRANSISTOR STB1277 IC3S01 1-804-450-11 IC LA7359 (SE210B/SX110B)
- Page 48 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R1SD16 1-215-901-11 METAL OXIDE(S) 33K R3A13C 1-216-643-11 RES-CHIP 1/10W R1SD31 1-247-815-11 CARBON 1/8W R3A14 1-247-863-11 CARBON 1/8W R1SD32 1-247-833-11 CARBON 1.2K 1/8W R3A16 1-247-855-11 CARBON 1/8W R1SR11 1-216-367-11 METAL OXIDE 0.68 R3A17 1-247-845-11 CARBON...
- Page 49 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R404 1-247-807-11 CARBON 1/8W R6P04C 1-216-675-11 RES-CHIP 1/10W R406 1-247-863-11 CARBON 1/4W (SE210B/SE210D) (SE210D/SX110A) R6P05 1-247-855-11 CARBON 1/8W R407 1-247-853-11 CARBON 8.2K 1/4W R6P06C 1-216-669-11 RES-CHIP 5.6K 1/10W (SE210D/SX110A) (SE210B/SE210D)
- Page 50 MAIN Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R819C 1-216-651-11 RES-CHIP 1/10W < VIBRATOR > (SE210B/SE210D) R820C 1-216-651-11 RES-CHIP 1/10W XT301 1-795-330-11 VIBRATOR CRYSTAL (4.433619MHZ) (SE210B/SE210D) XT601 1-795-332-11 VIBRATOR CRYSTAL (32.768KHz) R821C 1-216-687-11 RES-CHIP 1/10W XT602 1-795-331-11 VIBRATOR CRYSTAL (8MHz) (SE210B/SE210D)
- Page 51 Ref. No. Part No. Description Remarks 3-066-349-31 MANUAL, INSTRUCTION (FINNISH) (SE210D/SX110A) 3-709-433-01 COVER, REMOTE CONTROL BATTERY (FOR RMT) 6-11E...
- Page 52 SLV-SE210B/SE210D/SE210G/SX110A/SX110B Sony Corporation 2001C1600-1 Network Entertainment Group 9-921-793-11 © 2001.3 – 68 – Published by Quality Assurance Dept.