Table of Contents
Advertisement
4. Press Y and the following will be displayed:
5. Select 1 for a high-density diskette or 2 for a double density diskette.
After the password data is written, the diskette drive's indicator goes off
and the following message is displayed:
6. Remove the diskette.
It is highly recommended that you make a password service disk.
Otherwise, you will have to contact your dealer if you cannot remember
the password. The password service diskette does not work when the
computer is in Hibernation mode. Refer to Chapter 6, Power and Power-
up Modes, for details on using the password service diskette.
When a password service disk is made, the computer overwrites all the
data on the diskette with password data. Make sure the diskette you insert
does not contain any data you want to keep.
If your computer is protected by the Power on Password, when you turn
the power on the following message appears:
password =
Enter the password.
If the computer boots by the Auto Power On function and Hibernation is
on, the computer will start with the instant security function enabled. The
message above is not displayed.
In either case you have to enter the password. If you enter an invalid
password three times in succession, the computer will shut down. You
must turn the power back on to retry password entry.
User's Manual
Password Service Disk Type? (1:2HD, 2:2DD)
Remove the password service disk, then press any
key.
TSETUP and Passwords 7-23
Hide quick links:
Advertisement
Table of Contents
