2.1 Outline
2.1
Outline
This chapter describes the fault diagnosis procedures for field replaceable units (FRUs) in the
computer.
The FRUs covered here are as follows:
1. System board
4. Display
7. SD/MS/SM/MMC/XD
9. Parallel Port
See Chapter 4 for the procedures to replace FRUs and Chapter 3 for the procedures to use test
programs
The following tools are required to perform the diagnostic procedures:
1. Diagnostics (maintenance test program) disk
2. Phillips screwdrivers (2 mm, 2.5 mm)
3. Cleaning disk kit (for ODD drive cleaning)
4. Bootable CD
5. PC Card loopback connector
6. Multimeter
7. External monitor
8. Headphone
9. Microphone
10. A-BEX TEST DVD
11. Music CD
12. DVD TSD-1 (TOSHIBA EMI DVD Test Media)
Satellite M40/M45 TECRA A4 dynabook Vx/4 Maintenance Manual
2. 2.5-inch HDD
5. ODD drive
8. Speaker
10. IEEE 1394
3. Keyboard
6. LAN
11. Cooling module
2 Troubleshooting
2-1