Table of Contents
Advertisement
4 Replacement Procedures
4.24 System Board
Removing the System Board
To remove the system board, first remove the display assembly, keyboard, and top cover, and
then follow the steps below:
1. Remove the two M2.5x6 screws and two M2.5x3 screws securing the system board. Then
remove the two hexagonal VGA screws from the system board.
M2.5x 6 screws
M2.5x 3 screws
Figure 4-72
Removing the system board screws and the hexagonal screw
2. Remove the DC connector from its socket.
Figure 4-73
Removing the DC cable
4-60
Satellite A130/ A135 Series Maintenance Manual
- Quick Links:
- Hardware Overview
- Inch Hard Disk Drive
- Rtc Battery
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
