hit counter script
Toshiba Satellite L450 series User Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. Satellite L450 series
  6. User manual

Toshiba Satellite L450 series User Manual

Hide thumbs Also See for Satellite L450 series:
Table of Contents

Advertisement

Quick Links

See also: Maintenance Manual
TOSHIBA
Satellite L450/
Satellite Pro L450/
Satellite L450D/
Satellite Pro L450D series

Advertisement

Table of Contents
loading

Related Manuals for Toshiba Satellite L450 series

Summary of Contents for Toshiba Satellite L450 series

  • Page 1 TOSHIBA Satellite L450/ Satellite Pro L450/ Satellite L450D/ Satellite Pro L450D series...

  • Page 2: Copyright

    Copyright © 2009 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.

  • Page 3: Macrovision License Of Notice

    Wi-Fi is a registered trademark of the Wi-Fi Alliance. Memory Stick and Memory Stick PRO are registered trademarks of SONY Corporation. Secure Digital and SD are trademarks of SD Card Association. MultiMediaCard and MMC are trademarks of MultiMediaCard Association. Other trademarks and registered trademarks not listed above may be used in this manual.

  • Page 4: Eu Declaration Of Comformity

    Only peripherals complying with the FCC class B limits may be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer’s external monitor port, Universal Serial Bus...

  • Page 5: Modem Warning Notice

    Modem warning notice Conformity Statement The equipment has been approved to [Commission Decision “CTR21”] for pan-European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTNs provided in different countries/regions the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point.

  • Page 6: Japan Regulations

    Japan regulations Region selection If you are using the computer in Japan, technical regulations described under Telecommunications Business Law require that you select the Japan region mode. It is illegal to use the modem in Japan with any other selection. Redial Up to two redial attempts can be made.

  • Page 7: Telephone Company Procedures

    FCC. In the event repairs are ever needed on your modem, they should be performed by TOSHIBA Corporation or an authorized representative of TOSHIBA Corporation.

  • Page 8: Instructions For Ic Cs-03 Certified Equipment

    Instructions for IC CS-03 certified equipment 1. The Industry Canada label identifies certified equipment. This certification means that the equipment meets certain telecommunications network protective, operational and safety requirements as prescribed in the appropriate Terminal Equipment Technical Requirements document(s). The Department does not guarantee the equipment will operate to the user’s satisfaction.

  • Page 9: Notes For Users In Australia And New Zealand

    Notes for Users in Australia and New Zealand Modem warning notice for Australia Modems connected to the Australian telecoms network must have a valid Austel permit. This modem has been designed to specifically configure to ensure compliance with Austel standards when the country/region selection is set to Australia.
  • Page 10 ■ Some parameters required for compliance with Telecom’s PTC Specifications are dependent on the equipment (PC) associated with this modem. The associated equipment shall be set to operate within the following limits for compliance with Telecom Specifications: a/ There shall be no more than 10 call attempts to the same number within any 30 minute period for any single manual call initiation, and;...

  • Page 11: General Conditions

    ■ The transmit level from this device is set at a fixed level and because of this there may be circumstances where the performance is less than optimal. Before reporting such occurrences as faults, please check the line with a standard Telepermitted telephone, and only report a fault if the phone performance is impaired.

  • Page 12: Following Information Is Only For Eu-Member States

    For more detailed information about the collection and recycling programmes available in your country, please visit our website (http://eu.computers.toshiba-europe.com) or contact your local city office or the shop where you purchased the product. Disposal of batteries and/or accumulators The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators must be collected and disposed of separately from household waste.
  • Page 13 ENERGY STAR logo on the computer and the following information applies. TOSHIBA is a partner in the ENERGY STAR Program and has designed this computer to meet the latest ENERGY STAR guidelines for energy efficiency.

  • Page 14: Optical Disc Drive Standards

    Optical disc drive standards TOSHIBA Satellite L450/Pro L450/L450D/Pro L450D series computer is shipped with one of the following drives preinstalled: DVD Super Multi (+-R DL) drive or DVD Super Multi (+-R DL) /w Label Flash drive. The drive has one of the following labels:...
  • Page 15 DVD Super Multi (+-R DL) drive Panasonic UJ890A/UJ890E Location of the required label COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J. MANUFACTURED Panasonic Communications Co., Ltd. 1-62, 4-Chome Minoshima Hakata-ku Fukuoka, Japan HLDS GT20N/GT20F Location of the required label COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J.
  • Page 16 PRODUCT IS CERTIFIED BY THE MANUFACTURER TO COMPLY WITH DHHS RULES 21 CFR CHAPTER 1, SUBCHAPTER J, APPLICABLE AT THE DATE OF MANUFACTURE. MANUFACTURED Toshiba Samsung Storage Technology Korea Corporation 14F Digital empireII, 486 sin-dong, YoungTong-gu, Suwon-si, Gyeonggi-do, Korea, 443-734 User’s Manual...

  • Page 17: International Precautions

    International precautions CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT.” To use this model properly, read the instruction manual carefully and keep this manual for your future reference. In case of any trouble with this model, please contact your nearest “AUTHORIZED service station.”...

  • Page 18: Important Notice

    Dispose of used batteries according to the manufacturer’s instructions. Use only the battery pack that came with the computer or an optional battery pack. Use of wrong battery could damage your computer. TOSHIBA assumes no liability for any damage in such case. User’s Manual xviii...

  • Page 19: Table Of Contents

    Special features ......... . 1-9 TOSHIBA Value Added Package ......1-11 Utilities and Applications.
  • Page 20 Using TOSHIBA Web Camera Application ....4-21 Using TOSHIBA Face Recognition ......4-22 Modem .
  • Page 21 TOSHIBA support ........
  • Page 22 V.90/V.92 mode ......... . . C-1 AT Command.

  • Page 23: Preface

    This manual tells how to set up and begin using your TOSHIBA Satellite L450/Pro L450/L450D/Pro L450D series computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.

  • Page 24: Conventions

    Preface Chapter 5, Keyboard, describes special keyboard functions including the keypad overlay and hot keys. Chapter 6, Power and Power-up Modes, gives details on the computer’s power resources and battery save modes. Chapter 7, HW Setup and Passwords, explains how to configure the computer using the HW Setup program.
  • Page 25 Preface When procedures require an action such as clicking an icon or entering text, the icon's name or the text you are to type in is represented in the typeface you see to the left. Display Names of windows or icons or text generated by the computer that appear on its display screen are presented in the type face you see to the left.

  • Page 26: General Precautions

    General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.

  • Page 27: Heat Injury

    General Precautions Heat injury ■ Avoid prolonged physical contact with the computer. If the computer is used for long periods, its surface can become very warm. While the temperature will not feel hot to the touch, if you maintain physical contact with the computer for a long time, for example if you rest the computer on your lap or if you keep your hands on the palm rest, your skin might suffer a low-heat injury.

  • Page 28: Introduction

    Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA. Equipment checklist Carefully unpack your computer, taking care to save the box and packaging materials for future use.
  • Page 29 Online Manual SD Memory Card Format Utility and other SD functions are packaged into TOSHIBA SD Memory Utilities. When uninstalling the SD utilities, click Start → Control Panel → Uninstall a program, and select TOSHIBA SD Memory Utilities. Documentation ■...

  • Page 30: Features

    Your computer is equipped with one processor and processor type varies depending on model. To check which type of processor is included in your model, open the TOSHIBA PC Diagnostic Tool Utility by clicking Start → All programs → TOSHIBA → Utilities → PC Diagnostic Tool.
  • Page 31 Introduction Video RAM Video RAM depends on the model you purchased. Mobile Intel GM45 Express Chipset model/ ® Mobile Intel GL40 Express Chipset model: ® Video RAM capacity shares with main memory, and the proportion depends on Dynamic Video Memory Technology. AMD M780G Chipset model/ AMD M780V Chipset model: Video RAM capacity shares with main memory,...

  • Page 32: Pointing Device

    Introduction Pointing Device Built-in Touch Pad The integrated Touch Pad and control buttons in the palm rest allow control of the on-screen pointer and support functions such as the scrolling of windows. Power Battery pack The computer is powered by one rechargeable lithium-ion battery pack.
  • Page 33 Introduction Multimedia Sound system The integrated sound system provides support for the computer's internal speakers and microphone, also allowing an external microphone and headphones to be connected via the appropriate jacks. Web Camera Web Camera is a device that allows you to record video or take photographs with your computer.
  • Page 34 Introduction ■ The transmission speed over the wireless LAN and the distance over which wireless LAN can reach may vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, and client design and software/hardware configurations. The Transmit Rate (at X Mbit/s) is the theoretical maximum speed under the IEEE802.11 (a/b/g/n) standards.
  • Page 35 Introduction Optical disc drive DVD Super Multi The drive reads DVD-ROM's at a maximum 8x drive speed and CD-ROM's at a maximum 24x speed, and writes CD-R's at up to 24x speed, CD-RW's at up to 24x speed, DVD-R's and DVD+R's at up to 8x speed, DVD-RW's at up to 6x speed, DVD+RW's at up to 8x speed, DVD-R (Dual layer) at up to 6x speed, DVD+R (Double Layer)

  • Page 36: Special Features

    Special features The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use. Access each function using the following procedures. *1 To access the Power Options, click Start → Control Panel → System and Security →...
  • Page 37 Introduction Keypad overlay A ten-key numeric keypad is integrated into the keyboard. Please refer to the Keypad overlay section in Chapter 5, Keyboard, for information on using this feature. Power on password Two levels of password security, supervisor and user, are available to prevent unauthorized access to your computer.

  • Page 38: Toshiba Value Added Package

    TOSHIBA Value Added Package This section describes the TOSHIBA Component features pre-installed on the computer. TOSHIBA Power TOSHIBA Power Saver provides you with the...

  • Page 39: Utilities And Applications

    To start the utility, click the Windows Start button, point to All Programs, click TOSHIBA, click Utilities, and select HWSetup icon. TOSHIBA ConfigFree TOSHIBA ConfigFree is a suite of utilities that improve the ease and control of communication devices and network connections, help in the...
  • Page 40 In order to determine if the optical disc drive installed in your computer supports Labelflash follow the steps as detailed below: 1. Click Start → All Programs → DVD MovieFactory for TOSHIBA → DVD MovieFactory Launcher to launch DVD MovieFactory.
  • Page 41 Lock button at the bottom of the right pane of the start menu. ■ TOSHIBA Assist: This can be used to open TOSHIBA Assist if it is already installed in your computer. TOSHIBA DVD This software is provided for playback of DVD PLAYER Video.It has an on-screen interface and...

  • Page 42: Options

    Introduction Options You can add a number of options to make your computer even more powerful and convenient to use. The following options are available: Memory expansion 1GB or 2GB memory module (PC2-6400) can easily be installed in the computer. Battery Pack An additional battery pack can be purchased for use as either a spare or replacement.

  • Page 43: Chapter 2 The Grand Tour

    Chapter 2 The Grand Tour This chapter identifies the various components of your computer. Become familiar with each component before you operate the computer. Front with the display closed The following figure shows the computer’s front with its display panel in the closed position.

  • Page 44: Left Side

    The Grand Tour Microphone jack A 3.5 mm mini microphone jack enables connection of a three-conductor mini jack for monaural microphone input, and connection of a stereo device for audio input. Headphone jack This jack lets you connect a stereo headphone (16 ohm minimum).
  • Page 45 The Grand Tour External monitor This port allows you to connect an external port monitor to the computer. LAN jack This jack lets you connect to a LAN. The adaptor has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T) and Fast Ethernet LAN (100 megabits per second, 100BASE-TX).

  • Page 46: Right Side

    The Grand Tour Right side The following figure shows the computer’s right side. 1. Universal Serial Bus (USB 2.0) port *2. Modem jack 3. Optical disc drive 4. DC IN 19V Jack 5. Security lock slot * Depending on the model you purchased. Figure 2-3 The right side of the computer Universal Serial Bus Two Universal Serial Bus ports, which comply...

  • Page 47: Back Side

    The Grand Tour Optical disc drive The computer is configured with a DVD Super Multi drive. DC IN 19V Jack The AC adaptor connects to this jack in order to power the computer and charge its internal batteries. Please note that you should only use the model of AC adaptor supplied with the computer at the time of purchase - using the wrong AC adaptor can cause damage to the...

  • Page 48: Underside

    The Grand Tour Underside The following figure shows the underside of the computer. You should ensure that the display is closed before the computer is turned over to avoid causing any damage. 1. Battery safety lock 2. Battery pack 3. Battery release latch 4.
  • Page 49 The Grand Tour Memory module The memory module slots are located here. The slots memory module slots allow for the installation, replacement and removal of additional memory modules. Please refer to the Additional memory module section in Chapter 8, Optional Devices for more information.

  • Page 50: Front With The Display Open

    The Grand Tour Front with the display open This section shows the computer with the display panel open. In order to open the display, lift the display panel up and position it at a comfortable viewing angle for you. *1. Web Camera LED *2.
  • Page 51 You can use it for video chatting or video conferences using a communication tool such as Windows Live Messenger. TOSHIBA Web Camera Application will help you to add various video effects to your video or photograph.
  • Page 52 The Grand Tour Keep foreign objects out of the speakers. Never allow metal objects, such as screws, staples and paper clips, to enter the computer or keyboard. Foreign metal objects can create a short circuit, which can cause computer damage and fire, possibly resulting in serious injury. Touch Pad The Touch Pad mouse control device located in the center of the palm rest is used to control the...

  • Page 53: System Indicators

    The Grand Tour System indicators The LED system indicators for specific computer operations glow when those operations are in progress. Figure 2-7 System indicators Wireless The Wireless communication indicator glows communication amber when the Bluetooth and Wireless LAN functions are turned on. DC IN The DC IN indicator normally glows white when power is being correctly supplied from the AC...

  • Page 54: Keyboard Indicators

    The Grand Tour Keyboard indicators The following figures show the positions of the CAPS LOCK indicator and the keypad overlay indicators which show the following conditions: ■ When the CAPS LOCK indicator glows, the keyboard will produce capitals when any letter is typed. ■...

  • Page 55: Optical Disc Drives

    This section describes the types of writable CD/DVD discs. Check the specifications of your drive to see the types of discs it can write. Use TOSHIBA Disc Creator to write compact discs. Please refer to Chapter 4, Operating Basics for further information.
  • Page 56 The Grand Tour DVDs ■ DVD-R, DVD+R, DVD-R (Dual Layer) and DVD+R (Double Layer) discs can be written only once. The recorded data cannot be erased or changed. ■ DVD-RW, DVD+RW and DVD-RAM discs can be recorded more than once. Some types and formats of DVD-R (Dual Layer) and DVD+R (Double Layer) discs may be unreadable.

  • Page 57: Ac Adaptor

    Always use the TOSHIBA AC adaptor that was included with your computer, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury.

  • Page 58: Chapter 3 Getting Started

    Chapter 3 Getting Started This chapter provides basic information to start using your computer. It covers the following topics: ■ If the battery pack is not pre-installed in the computer that you purchased, please install the battery pack before you start using the computer.

  • Page 59: Connecting The Ac Adaptor

    Getting Started ■ Use an anti-virus software and update it regularly. ■ Never format storage media without checking its content - formatting destroys all stored data. ■ It is a good idea to periodically back up the internal hard disk drive or other main storage device to external media.
  • Page 60 ■ Always use the TOSHIBA AC adaptor that was included with your computer or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury.
  • Page 61 Getting Started 1. Connect the power cord to the AC adaptor. Figure 3-1 Connecting the power cord to the AC adaptor (2-pin plug) Figure 3-2 Connecting the power cord to the AC adaptor (3-pin plug) Either a 2-pin or 3-pin adaptor/cord will be included with the computer depending on the model.

  • Page 62: Opening The Display

    Getting Started Opening the display The display panel can be opened to a wide range of angles for optimal viewing. While holding down the palm rest with one hand so that the main body of the computer is not raised, slowly lift the display panel - this will allow the angle of the display panel to be adjusted to provide optimum clarity.

  • Page 63: Turning On The Power

    Getting Started Turning on the power This section describes how to turn on the power - the Power indicator will then indicate the status. Please refer to the Monitoring of power condition section in Chapter 6, Power and Power-up Modes for more information.

  • Page 64: Turning Off The Power

    Getting Started Turning off the power The power can be turned off in one of three modes, either Shut Down Mode, Hibernation Mode or Sleep Mode. Shut Down Mode When you turn off the power in Shut Down Mode no data will be saved and the computer will boot to the operating system's main screen the next time it is turned on.

  • Page 65: Starting Hibernation Mode

    Getting Started Benefits of Hibernation Mode The Hibernation Mode feature provides the following benefits: ■ Saves data to the hard disk drive when the computer automatically shuts down because of a low battery condition. ■ You can return to your previous working environment immediately when you turn on the computer.

  • Page 66: Sleep Mode

    Getting Started Sleep Mode If you have to interrupt your work, you are able to turn off the power without exiting from your software by placing the computer into Sleep Mode. In this mode data is maintained in the computer's main memory so that when you turn on the power again, you can continue working right where you left off.

  • Page 67: Restarting The Computer

    Getting Started Executing Sleep Mode You can also enable Sleep Mode by pressing FN + F3 - please refer to Chapter 5, Keyboard, for further details. You can enter Sleep Mode in one of three ways: ■ Click Start then click the arrow button ( ) in the power management button ( ) and select Sleep from the menu.

  • Page 68: System Recovery Options

    Getting Started System Recovery Options A hidden partition is allocated on the hard disk drive for the System Recovery Options. This partition stores files which can be used to repair the system in the event of a problem. The System Recovery Options feature will be unusable if this partition is deleted.
  • Page 69 5. Double click the TOSHIBA Recovery Media Creator icon on the ® Windows 7 desktop, or select the application from Start Menu. 6. After TOSHIBA Recovery Media Creator starts, select the type of media and the title you wish to copy, and then click the Create button. User’s Manual 3-12...
  • Page 70 Getting Started Restoring the pre-installed software from the Recovery hard disk drive A portion of the total hard disk drive space is configured as a hidden recovery partition. This partition stores files which can be used to restore pre-installed software in the event of a problem. If you subsequently set up your hard disk drive again, do not change, delete or add partitions in a manner other than specified in the manual, otherwise you may find that space for the required software is not available.
  • Page 71 4. A menu will be displayed from which you should follow the on-screen instructions. When drivers/utilities are installed, you can setup the respective drivers/utilities from following place. To open the setup files, Click Start → All Programs → TOSHIBA → Applications and Drivers. User’s Manual 3-14...

  • Page 72: Chapter 4 Operating Basics

    Chapter 4 Operating Basics This chapter describes the basic operations of your computer and highlights the precautions that should be taken when using it. Using the Touch Pad To use the Touch Pad, simply touch and move your fingertip across it in the direction you want the on-screen pointer to go.

  • Page 73: Using Optical Disk Drives

    CD/DVD-ROM operation. When the computer is accessing a CD/DVD- ROM, an indicator on the drive glows. Use the Toshiba DVD Player application to view DVD-Video discs. Loading discs To load CD/DVD's, follow the steps as listed below and refer to figures 4-4 to 4-6.
  • Page 74 Operating Basics 2. Grasp the disc tray gently and pull until it is fully opened. Figure 4-3 Pulling the disc tray open 3. Lay the CD/DVD, label side up, in the disc tray. Figure 4-4 Inserting a CD/DVD When the disc tray is fully opened, the edge of the computer will extend slightly over the area where you insert the media.

  • Page 75: Removing Discs

    Operating Basics ■ Do not touch either the laser lens or the area immediately around it - doing so could cause misalignment and may damage the drive. ■ Make sure that no foreign objects are inserted into or otherwise enter the drive.
  • Page 76 Operating Basics 2. The CD/DVD media will extend slightly over the sides of the disc tray in order that you can hold it. Grasp it carefully by its edges and lift it vertically off of the central spindle and out of the tray. Figure 4-5 Removing a CD/DVD 3.

  • Page 77: Writing Cd/Dvd On Dvd Super Multi Drives

    CD-R/RW media cannot be accessed using the Create CD/DVD option in Media Center. ■ To write data to CD-R/-RW media, use the TOSHIBA Disc Creator feature that is installed on your computer. When writing information to media using an optical drive, you should always ensure that you connect the AC adaptor to a live power socket.
  • Page 78 Operating Basics CD-R: TAIYO YUDEN CO., Ltd. MITSUBISHI KAGAKU MEDIA CO., LTD. Hitachi Maxell,Ltd. CD-RW: (Multi-Speed and High-Speed) MITSUBISHI KAGAKU MEDIA CO., LTD. CD-RW: (Ultra-Speed) MITSUBISHI KAGAKU MEDIA CO., LTD. DVD-R: DVD Specifications for Recordable Disc for General Version 2.0 TAIYO YUDEN Co.,Ltd.
  • Page 79 Operating Basics DVD+RW: MITSUBISHI KAGAKU MEDIA CO., LTD. (for 2.4x, 4x and 8x speed media) DVD-RAM: DVD Specifications for DVD-RAM Disc for Version 2.0, Version 2.1 or Version 2.2 Panasonic Electric Industrial Co.,Ltd. (for 3x and 5x speed media) Hitachi Maxell,Ltd. (for 3x and 5x speed media) ■...

  • Page 80: When Writing Or Rewriting

    CD/DVD - do not try to write from shared devices such as a server or any other network device. ■ Writing with software other than TOSHIBA Disc Creator has not been confirmed, therefore operation with other software applications cannot be guaranteed.

  • Page 81: Toshiba Disc Creator

    TOSHIBA Disc Creator Please be aware of the following limitations when you use the TOSHIBA Disc Creator: ■ DVD Video cannot be created using TOSHIBA Disc Creator.
  • Page 82 Operating Basics ■ Do not use the 'Disc Backup' function of TOSHIBA Disc Creator in order to copy DVD Video or DVD-ROM material that has copyright protection. ■ DVD-RAM discs cannot be backed up using the 'Disc Backup' function of TOSHIBA Disc Creator.

  • Page 83: Data Verification

    Simplified steps for making a Labelflash DVD: 1. Insert a Labelflash disc in optical disc drive. 2. Click Start → All Programs → DVD MovieFactory for TOSHIBA → DVD MovieFactory Launcher to launch DVD MovieFactory. 3. Click Create Disc Label. Corel Label@Once is started.

  • Page 84: Important Information For Use

    Please refer to the Help and Manual files for additional Corel DVD MovieFactory information. Opening the Corel DVD MovieFactory Manual Start → All Programs → DVD MovieFactory for TOSHIBA → DVD MovieFactory User Manual. Important information for use Note the following limitations when you write Video DVD: 1.

  • Page 85: Notes On Use

    If you use an over-used rewritable disc, the full formatting might be locked. Please use a brand new disc. TOSHIBA DVD Player Please be aware of the following limitations when you use the TOSHIBA DVD PLAYER: Notes on use ■...

  • Page 86: Toshiba Dvd Player

    Fn + F1 keys when running the "TOSHIBA DVD PLAYER". Display Devices & Audio 1. "TOSHIBA DVD PLAYER" will only run when "Colors" is set to "Highest (32 bit)". The "Colors" setting can be adjusted on the "Monitor" tab in display device property.

  • Page 87: Media Care

    Open TOSHIBA DVD PLAYER HELP TOSHIBA DVD PLAYER features and instructions are also explained in detail in "TOSHIBA DVD PLAYER Help". Use the following procedure to open "TOSHIBA DVD PLAYER Help". ■ Click the "Help" button ( ) in the Display Area.

  • Page 88: Sound System

    Operating Basics 7. If your CD's or DVD's become dusty or dirty, wipe them with a clean dry cloth from the center hole outwards - do not wipe in a circular direction. If necessary, you can use a cloth that has been lightly dampened in water or a neutral cleaner but you must not use benzine, thinner or any similar cleaning solution.

  • Page 89: Changing System Sounds

    Operating Basics To launch Volume Mixer, follow the steps below. 1. Locate the Speaker icon on the task tray. 2. Right-click the Speaker icon on the task tray. 3. Select Open Volume Mixer from the menu. Click the Device button to display available playback devices. Select Speakers to use the internal speakers for listening.

  • Page 90: Using The Web Camera

    You can use it for video chatting or video conferences using a communication tool such as Windows Live Messenger. Toshiba Web Camera Application will help you to add various video effects to your video or photograph.
  • Page 91 Operating Basics 1. Microphone 2. Web Camera 3. Web Camera LED Figure 4-7 Web Camera ■ Please unstick the protective plastic-film before using the Web Camera. ■ Do not point the web camera directly at the sun. ■ Do not touch or press strongly on the web camera lens. Doing so may reduce image quality.

  • Page 92: Using Toshiba Web Camera Application

    Operating Basics Using TOSHIBA Web Camera Application TOSHIBA Web Camera Application is pre-configured to start when you turn on Windows 7; if you need to restart it go to Start → All Programs → TOSHIBA → Utilities → Web Camera Application.

  • Page 93: Using Toshiba Face Recognition

    Toshiba does not guarantee that the face recognition utility will accurately screen out unauthorized users at all times. Toshiba is not liable for any failure or damage that might arise out of the use of the face recognition software or utility.
  • Page 94 Take a picture for facial verification purposes, and register the data needed when you log in. To register the data needed when you log in, follow the steps as described below: 1. To launch this utility, click Start → All Programs → TOSHIBA → Utilities → Face Recognition. ■...
  • Page 95 How to launch the help file For further information on this utility, please refer to the help file. 1. To launch the help file, click Start → All Programs → TOSHIBA → Utilities → Face Recognition Help. Windows Logon via TOSHIBA Face Recognition This section explains how to login to Windows with TOSHIBA Face Recognition.

  • Page 96: Modem

    Operating Basics 6. Windows Welcome screen will be displayed, and will be logged in automatically to Windows. 1:1 Mode Login screen 1. Turn on the computer. 2. The Select Tiles screen will be displayed. 3. Select Start face recognition ( 4.

  • Page 97: Properties Menu

    Check the specified areas carefully before using it. To select a region, follow the steps as detailed below: 1. Click Start → All Programs → TOSHIBA → Networking → Modem Region Select. If it is available, do not use the Country/Region Select function included as...

  • Page 98: Modem Selection

    Operating Basics Location list for region selection Displays a sub-menu appears which details location information. Open dialog box, if the modem and Telephony Current Location region code do not match Displays a warning if the current settings for both region code and telephony location are different.

  • Page 99: Wireless Communications

    Operating Basics 2. Plug the other end of the modular cable into a telephone jack. Figure 4-9 Connecting the internal modem Do not pull on the cable or move the computer while the cable is connected. Disconnecting the modular cable To disconnect the modular cable, follow the steps as detailed below: 1.

  • Page 100: Wireless Communication Indicator

    ■ TOSHIBA is not liable for the loss of data due to eavesdropping or illegal access through the wireless LAN and the damage thereof. Wireless communication indicator The wireless communication indicator shows the status of the computer's wireless communication functions.

  • Page 101: Lan

    Operating Basics The computer has built-in support for Ethernet LAN (10 megabits per second, 10BASE-T) and Fast Ethernet LAN (100 megabits per second, 100BASE-TX). This section describes how to connect/disconnect to a LAN. Do not install or remove a memory module while Wake-up on LAN is enabled.

  • Page 102: Cleaning The Computer

    Operating Basics Figure 4-10 Connecting the LAN cable 3. Plug the other end of the cable into a LAN hub connector or router. Check with your LAN administrator and hardware or software vendor before using or configuring a network connection. When the computer is exchanging data with the LAN, the LAN Active indicator glows yellow.

  • Page 103: Moving The Computer

    Operating Basics Using the cleaning cloth Some models include 1 cleaning cloth. The cleaning cloth can be used to wipe away dust and fingerprints from the keyboard and palm rest area of your computer. ■ When wiping the keyboard, palm rest and display panel, do so gently without using excessive pressure.

  • Page 104: Heat Dispersal

    Operating Basics ■ Always use a suitable carry case when transporting the computer. ■ When carrying your computer, be sure to hold it securely so that it does not fall or hit anything. ■ Do not carry your computer by holding any of its protruding elements. Heat dispersal To protect from overheating, the CPU has an internal temperature sensor.

  • Page 105: Chapter 5 The Keyboard

    Chapter 5 The Keyboard The computer's keyboard layouts are compatible with a 104/105-key enhanced keyboard - by pressing some keys in combination, all of the 104/105-key enhanced keyboard functions can be performed on the computer. The number of keys available on your keyboard will depend on which country/region your computer is configured for, with keyboards being available for numerous languages.

  • Page 106: Function Keys: F1

    Soft keys: FN key combinations The FN (function) key is unique to TOSHIBA computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features.

  • Page 107: Hot Keys

    The Keyboard Press FN + F10 or FN + F11 to access the computer's integrated keypad. When activated, the keys with grey markings on their bottom edge become either numeric keypad keys (FN + F11) or cursor control keys (FN + F10). Please refer to the Keypad overlay section in this chapter for more...
  • Page 108 The Keyboard Sleep: Pressing FN + F3 switches the system to Sleep mode. Hibernate: Pressing FN + F4 switches the system to Hibernate mode. Output: Pressing FN + F5 changes the active display device. Brightness (Down): Pressing FN + F6 decreases the computer's display panel brightness in individual steps.

  • Page 109: Windows Special Keys

    FN Sticky key You can use the TOSHIBA Accessibility Utility to make the FN key sticky, that is, you can press it once, release it, and then press an "F Number" key. To start the TOSHIBA Accessibility utility, click Start → All Programs →...

  • Page 110: Keypad Overlay

    The Keyboard Keypad overlay Your computer's keyboard does not have a separate numeric keypad but includes a numeric keypad overlay which functions like one - this is located in the center of the keyboard with the relevant keys having grey letters at their front edge.

  • Page 111: Generating Ascii Characters

    The Keyboard Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard functions without having to turn the overlay off: 1. Hold FN and press any other key - this key will operate as if the overlay were off.

  • Page 112: Chapter 6 Power And Power-Up Modes

    Chapter 6 Power and Power-up Modes The computer's power resources include the AC adaptor and internal batteries. This chapter gives details on making the most effective use of these resources including charging and changing batteries, tips for saving battery power, and power-up modes. Power conditions The computer's operating capability and battery charge status are affected by different power conditions, including whether an AC adaptor is...

  • Page 113: Power Indicators

    Power and Power-up Modes Table 6-1 Power conditions continued Power on Power off (no operation) Battery charge • Operates adaptor is above low • LED: Battery off battery trigger DC IN off connected point Battery charge • Operates is below low •...

  • Page 114: Battery Types

    Power and Power-up Modes DC IN indicator Check the DC IN indicator to determine the power status with the AC adaptor connected - the following indicator conditions should be noted: Indicates the AC adaptor is connected and is Green correctly supplying power to the computer. Under any other conditions, the indicator does not No light light.

  • Page 115: Real Time Clock Battery

    Press <F1> to resume, <F2> to Setup. The computer's RTC battery is a lithium battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed of.

  • Page 116: Care And Use Of The Battery Pack

    The battery pack is a lithium ion battery, which can explode if not replaced, used, handled or disposed of properly. Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by TOSHIBA as replacements. ■ Charge the battery pack only in an ambient temperature between 5 and 35 degrees Celsius.

  • Page 117: Battery Charging Notice

    Power and Power-up Modes Use only the computer connected to an AC power source or the optional TOSHIBA Battery charger to charge the battery pack. Never attempt to charge the battery pack with any other charger. Time The following table shows the approximate time required to fully charge a discharged battery.

  • Page 118: Monitoring Battery Capacity

    Power and Power-up Modes Repeat these steps two or three times until the battery recovers normal capacity. Monitoring battery capacity Remaining battery power can be monitored using the following methods. ■ Clicking the battery icon on the task bar ■ Via the Battery Status in the Windows Mobility Center window ■...

  • Page 119: Retaining Data With Power Off

    Power and Power-up Modes Retaining data with power off When you turn off your computer with fully charged batteries, the batteries retain data for the following approximate time periods. Retention Time Battery type State and Retention Time Battery pack 1 day for 6 cell, 0.5 day for 3 cell (sleep mode) 10 days for 6 cell, 5 days for 3 cell (shut down mode)

  • Page 120: Replacing The Battery Pack

    Power and Power-up Modes Replacing the battery pack Please be aware that the battery pack is classified as a consumable item. The operating life of the battery pack will gradually reduce through repeated charging and discharging, and will need to be replaced when it reaches the end of its operating life.
  • Page 121 Power and Power-up Modes 5. Slide the battery safety lock towards the release ( ) position to make the battery release latch movable. Figure 6-1 Releasing the battery pack (1) 6. Slide and hold the battery release latch (1) to disengage the battery pack and then remove it from the computer (2).
  • Page 122 Power and Power-up Modes To install a battery, follow the steps as detailed below: 1. Insert the battery pack as far as it will go into the computer (1). 2. Ensure that the battery pack is securely in place and the battery safety lock (2) is in its position.

  • Page 123: Toshiba Password Utility

    Power and Power-up Modes TOSHIBA Password Utility The TOSHIBA Supervisor Password Utility provides two levels of password security: User and Supervisor. Passwords set in TOSHIBA Supervisor Password Utility are different from ® the Windows login password. User Password To start the utility, point to or click the following items:...

  • Page 124: Power-Up Modes

    Power and Power-up Modes 2. Enter the Password. 3. Press Enter. If you enter the password incorrectly three consecutive times, the computer shuts down. You must turn on the computer again and re-enter the password. Power-up modes The computer has three power-up modes: ■...

  • Page 125: Chapter 7 Hw Setup And Passwords

    TOSHIBA HW Setup allows you to configure settings for General, Password, Display, Boot Priority, Keyboard, USB and LAN. If the supervisor password is set, access to the TOSHIBA HW Setup program can be prevented when the user password is used to log on to the computer.

  • Page 126: User Password

    HW Setup and Passwords General This window displays the BIOS version and contains two buttons: Default Return all HW Setup values to the factory settings. About Display the HW Setup version. Setup This field displays BIOS Version and date. When finish BIOS update, please restart your computer and press F2 into BIOS setup manual and load BIOS default one time.

  • Page 127: Boot Priority

    HW Setup and Passwords Not registered If they do not match, the following message appears. You must repeat step 1. Incorrect Password!!! If you enter the password incorrectly three times in a row, the computer will shut down. You will not be able to access the password option in the HW Setup. In this case you must turn the power off and back on to retry the procedure.
  • Page 128 HW Setup and Passwords Keyboard Wake-up on Keyboard When this feature is enabled and the computer is in Sleep mode, you can turn on the computer by pressing any key. It is effective only for the internal keyboard and only when the computer is in Sleep mode. Enabled Enables the Wake-up on Keyboard feature.

  • Page 129: Chapter 8 Optional Devices

    Chapter 8 Optional Devices Optional devices can expand the computer's capabilities and its versatility. This chapter describes the connection or installation of the following devices: To connect optional devices (such as USB device or External monitor) to the computer, be sure to check the shape and orientation of the connector before connecting.

  • Page 130: Bridge Media Slot

    Optional Devices Bridge media slot The computer is equipped with a bridge media slot that can accommodate some kinds of memory media with various memory capacities so that you can easily transfer data from devices, such as digital cameras and Personal Digital Assistants.

  • Page 131: Additional Memory Module

    Optional Devices Below is a simple explanation for distinguishing SD memory cards from SDHC memory cards. ■ SD and SDHC memory cards appear the same externally. ■ The logo on SD and SDHC memory cards is different, so pay careful attention to the logo when purchasing.

  • Page 132: Installing A Memory Module

    Optional Devices ■ Use only memory modules approved by TOSHIBA. ■ Do not try to install or remove a memory module under the following conditions. a. The computer is turned on. b. The computer was shut down in either Sleep or Hibernation Mode.
  • Page 133 Optional Devices 3. Turn the computer upside down and remove the memory module cover. 1. Memory module cover 2. Screw 3. Slot A 4. Slot B Figure 8-2 Removing the memory module cover 4. Align the notch of the memory module with that of the memory module slot and gently insert the module into the slot at about a 45 degree angle before holding it down until the latches on either side snap into place.

  • Page 134: Removing A Memory Module

    Optional Devices 5. Seat the memory module cover in place and secure it with one screw. Take care to ensure that the memory module cover is firmly closed. Figure 8-3 Seating the memory module cover 6. Install the battery pack - refer to Replacing the battery pack section in Chapter 6,...

  • Page 135: Battery Packs

    Optional Devices 5. Grasp the memory module by its edges and remove it from the computer. ■ If you use the computer for a long time, the memory modules and the circuits locating close to the memory modules will become hot. In this case, let them cool to room temperature before you replace them.Or you will get burnt if you touch any of them.
  • Page 136 Optional Devices 1. USB connector 2. Disk-In-Use Indicator 3. Floppy diskette slot 4. Eject button Figure 8-4 USB floppy diskette drive USB connector Insert this connector into one of the free USB ports of your computer. Disk-In-Use Indicator This indicator glows when the floppy diskette is being accessed.
  • Page 137 Optional Devices Using the USB floppy diskette drive The USB floppy diskette drive accommodates either a 1.44MB or 720KB floppy diskette and connects to one of the computer's USB ports. Connecting the USB floppy diskette drive To connect the drive, plug the floppy diskette drive's USB connector into one of the computer's free USB ports.

  • Page 138: External Monitor

    Optional Devices External monitor An external analog monitor can be connected to the computer's external monitor port, with the computer supporting WUXGA video mode. In order to connect a monitor, follow the steps as detailed below: 1. Turn the computer's power off. 2.

  • Page 139: Connecting The Hdmi Out Port

    Optional Devices ■ As the port operation of all HDMI (High-Definition Multimedia Interface) monitors have not been confirmed, some HDMI monitors may not function properly. ■ When you connect a television or external monitor to the HDMI port and the display output device is set to HDMI. When you unplug the HDMI cable and re-plug it in please wait at least 5 seconds before you replug the HDMI cable again.
  • Page 140 Optional Devices Settings for display video on HDMI To view video on the HDMI device, be sure to configure the following settings otherwise you may find that nothing is displayed. ■ Be sure to use the FN + F5 HotKey to select the display device before starting to play video.

  • Page 141: Security Lock

    Optional Devices Using REGZA Link (PC Control) Toshiba notebooks with REGZA Link include a Toshiba utility dedicated to take advantage of its capabilities which can allow you to: ■ Use the TV remote control to output the computer screen onto the TV screen.

  • Page 142: Troubleshooting

    Chapter 9 Troubleshooting TOSHIBA have designed this computer for durability, however, should problems occur you are able to use the procedures detailed in this chapter to help determine the cause. All users should become familiar with this chapter as knowing what might go wrong can help prevent problems from occurring in the first place.

  • Page 143: Preliminary Checklist

    Troubleshooting Preliminary checklist You should always consider the simplest solution first - the items detailed in this checklist are easy to fix and yet may cause what appears to be a serious problem: ■ Make sure you turn on all peripheral devices before you turn on the computer - this includes your printer and any other external device you are using.

  • Page 144: Hardware And System Checklist

    Before using a peripheral device or application software that is not an authorized Toshiba part or product, make sure the device or software can be used with your computer. Use of incompatible devices may cause injury or may damage your computer.

  • Page 145: Self Test

    This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system according to how the Boot Priority option is set within the TOSHIBA HW Setup program. If any of the following conditions are present, the self test has failed: ■...

  • Page 146: Overheating Power Down

    Troubleshooting Overheating power down If the processor's temperature reaches an unacceptably high level with either setting, the computer will automatically shut down to prevent any damage - in this instance all unsaved data in memory will be lost. Problem Procedure Computer shuts down Leave the computer off until the DC IN indicator and DC IN indicator...
  • Page 147 Troubleshooting Battery If you suspect a problem with the battery, you should check the status of the DC IN indicator as well as the Battery indicator. Please refer to Chapter Power and Power-up Modes for more information on these indicators, together with general battery operation.

  • Page 148: Real Time Clock

    [F2] key to set Date/Time. Password Problem Procedure Cannot enter Please refer to the TOSHIBA Password Utility password section in Chapter 6, Power and Power-up Modes for further information. Keyboard Keyboard problems can be caused by the setup and configuration of the...

  • Page 149: Hard Disk Drive

    Alternatively you may wish to run the TOSHIBA PC Diagnostic Tool to check the general operation of the computer. If you are still unable to resolve the problem, contact your reseller, dealer or service provider.
  • Page 150 Troubleshooting Problem Procedure Slow performance The files on the hard disk drive may be fragmented - in this instance you should run the disk Defragmentation utility to check the condition of your files and the hard disk drive. Please refer to the operating system's documentation or online Help File for further information on operating and using the Defragmentation utility.

  • Page 151: Dvd Super Multi Drive

    Troubleshooting DVD Super Multi drive For further information, please refer to Chapter 4, Operating Basics. Problem Procedure You cannot access a Make sure the drive's disc tray is securely closed - CD/DVD in the drive press it gently into the computer until it clicks into place.
  • Page 152 Troubleshooting USB floppy diskette drive The USB floppy diskette drive is available only as an option. For further information, please refer to Chapter 4, Operating Basics. Problem Procedure Drive does not operate Check the connection between the computer and the drive to ensure that it is properly attached. Some programs run The computer's software or hardware correctly but others do...

  • Page 153: Memory Stick/Memory Stick Pro

    Troubleshooting Memory Stick/Memory Stick PRO For further information, please refer to Chapter 8, Optional Devices. Problem Procedure Memory Stick/Memory Remove the Memory Stick/Memory Stick PRO Stick PRO error from the computer and then reinsert it in order to occurs ensure it is firmly connected. If the problem persists, then you should refer to the documentation supplied with your Memory Stick/Memory Stick PRO for further information.

  • Page 154: Touch Pad

    Troubleshooting Touch Pad Problem Procedure On-screen pointer In this instance the system might be busy - Try does not respond to moving the mouse again after waiting a short pointing device while. operation Double-tapping does In this instance, you should initially try changing not work the double-click speed setting within the Mouse Control utility.

  • Page 155: Usb Mouse

    Troubleshooting USB mouse Problem Procedure On-screen pointer In this instance the system might be busy - Try moving the mouse again after waiting a short does not respond to while. mouse operation Remove the mouse from the computer and then reconnect it to a free USB port it in order to ensure it is firmly attached.

  • Page 156: Usb Device

    USB, you are still able to use a USB mouse and/or USB keyboard by setting the USB KB/Mouse Emulation option within the TOSHIBA HW Setup utility to Enabled. If you are still unable to resolve the problem, contact your reseller, dealer or service provider.
  • Page 157 Troubleshooting Problem Procedure An error will occur if a Remove the memory module from Slot B and memory module is insert it into Slot A. inserted into Slot B while no memory module is inserted in Slot A. Sound system In addition to the information in this section, please also refer to the documentation supplied with your audio device.

  • Page 158: Volume Control

    Troubleshooting Volume control Problem Procedure No sound is heard Adjust the volume control. Turn the dial clockwise to increase the volume and turn it counter-clockwise to decrease the volume. Turn the volume control while verifying the volume in order to adjust. Annoying sound is Volume cannot be adjusted when Windows is heard...
  • Page 159 Troubleshooting Problem Procedure No display Try adjusting the contrast and brightness controls on the external monitor. Press the FN + F5 hot key in order to change the display priority and ensure that it is not set for the internal display panel only. Check to see if the external monitor is connected.
  • Page 160 Troubleshooting Problem Procedure You place a call, but a Make sure that the settings are correct within connection can’t be your communication application. made After making a call you Ensure that the communication application's tone can’t hear a ring or pulse dialling selection feature is set correctly. Communication is cut The computer will automatically cut off off unexpectedly...

  • Page 161: Wireless Lan

    Troubleshooting Wireless LAN If the following procedures do not restore LAN access, consult your LAN administrator. For more information on wireless communication, refer to Chapter 4, Operating Basics. Problem Procedure Cannot access Make sure the computer’s wireless Wireless LAN communication switch is set to on. HDMI monitor output function Problem Procedure...

  • Page 162: Toshiba Support

    TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call...
  • Page 163 Troubleshooting Where to write If you are still unable to solve the problem and suspect that it is hardware related, write to TOSHIBA at the nearest location listed below: Outside of Europe In Europe Australia Germany & Austria TOSHIBA Australia Pty Ltd.

  • Page 164: Cpu

    95°F) or >25°C (77°F) at high altitude (all temperature references are approximate and may vary depending on the specific computer model - please refer to your computer documentation or visit the Toshiba website at www.pcsupport.toshiba.com for details). CPU performance may also vary from specifications due to design configuration.

  • Page 165: Memory (Main System)

    Read additional restrictions under "Environmental Conditions" in your computer documentation. Contact Toshiba Technical Service and Support for more information. 64-Bit Computing 64-bit processors are designed to take advantage of 32 and 64 bit computing.

  • Page 166: Battery Life

    Published battery life numbers are achieved on select models and configurations tested by Toshiba at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power.

  • Page 167: External Hdd Capacity

    Disclaimers The actual transmission speed will be lower than the theoretical maximum speed. New wireless network adapter "AR9281, AR9283, AR9285, and RTL8191SE" supports IEEE802.11b/g/draft-n but does not support IEEE02.11a. The wireless adapter is based on a draft 2.0 release version of the IEEE 802.11n specification and;...

  • Page 168: Appendix A Specifications

    Appendixes Table of Contents Specifications 1 Appendix A Display Controller 1 Appendix B V.90/V.92 1 Appendix C Wireless LAN 1 Appendix D AC Power Cord and Connectors 1 Appendix E User’s Manual Appendixes-1...

  • Page 169: Environmental Requirements

    Appendix A Specifications This appendix summarizes the computer’s technical specifications. Environmental requirements Operating Non-operating Ambient 5°C to 35°C -20°C to 60°C temperature Relative humidity 20% to 80% 10% to 90% Altitude (from 0 to 3,000 meters 0 to 10,000 meters sea level) Power Requirements AC adaptor...
  • Page 170 Built-in Modem The ability of this feature is depending on the model you purchased. Network control unit (NCU) Type of NCU Type of line Telephone line (analog only) Type of dialing Pulse Tone Control command AT commands EIA-578 commands Monitor function Computer’s speaker Communication specifications Communication...

  • Page 171: Appendix B Display Controller

    Appendix B Display Controller Display controller The display controller interprets software commands into hardware commands that turn particular pixels on or off. A high-resolution external monitor connected to the computer can display up to 2048 horizontal and 1536 vertical pixels at up to 16M colors. The display controller also controls the video mode, which uses industry standard rules to govern the screen resolution and the maximum number of colors that can be displayed on screen.

  • Page 172: V.90/V.92 Mode

    Appendix C V.90/V.92 The TOSHIBA internal modem uses V.90 technology. The modem is capable of downstream speeds of 56Kbps (kilobits per second) when connected to an Internet service provider that supports V.90/V.92. As with any modem, the actual throughput (speed of data transfer) depends on analog telephone line conditions, which can vary considerably.
  • Page 173 Table Result codes for a V.90 connection Result code Description CONNECT 32000 EC* Connection at 32000 bits/s CONNECT 36000 EC* Connection at 36000 bits/s CONNECT 40000 EC* Connection at 40000 bits/s CONNECT 44000 EC* Connection at 44000 bits/s CONNECT 48000 EC* Connection at 48000 bits/s CONNECT 52000 EC* Connection at 52000 bits/s...

  • Page 174: At Command

    AT Command -V90=* V.90 Dial Line Rate -V90 sets the maximum V.90 downstream that the modem attempts to connect -V90=0 V.90 disabled -V90=1 V.90 enabled: automatic speed selection - maximum modem speed(default) User’s Manual...

  • Page 175: Appendix D Wireless Lan

    Appendix D Wireless LAN This appendix is intended to help you get your Wireless LAN network up and running, with a minimum of parameters. Card Specifications Form Factor Mini Card ■ IEEE 802.11 Standard for Wireless LANS Compatibility ■ Wi-Fi (Wireless Fidelity) certified by the Wi-Fi Alliance.

  • Page 176: Radio Characteristics

    Subject to the radio regulations that apply in the countries/regions, your Wireless LAN card may support a different set of 5 GHz/2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for information about the radio regulations that apply in the countries/regions.
  • Page 177 Table Wireless IEEE 802.11 Channels Sets (Revision B and G) Frequency Range Channel ID 2400-2483.5 MHz 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457* 2462 2467* 2472* When installing Wireless LAN cards, the channel configuration is managed as follows: ■...
  • Page 178 Table Wireless IEEE 802.11 Channels Sets (Revision A) Frequency Range Channel ID 5150-5850 MHz Note 5180 5200 5220 5240 5260 5280 5300 5320 5500 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 5745 US only 5765 US only 5785 US only 5805...
  • Page 179 *1 Factory-set default channels *2 Refer to the sheet Approved Countries/Regions for use for the countries/regions that in which these channels can be used. *3 These channels are available to A/B/G combo type only. *4 Available Area: US (USA, CANADA) only. User’s Manual...

  • Page 180: Appendix Eac Power Cord And Connectors

    Appendix E AC Power Cord and Connectors The AC input plug of power cord must be compatible with various international AC power outlets. Power cords need to meet the local standards and the specifications listed as below: Length: Minimum 1.7 meters Wire size: Minimum 0.75 mm Current rating:...

  • Page 181: Certification Agencies

    Certification agencies Europe: Austria: Italy: Belgium: CEBEC The Netherlands: KEMA Denmark: DEMKO Norway: NEMKO Finland: FIMKO Sweden: SEMKO France: LCIE Switzerland: Germany: United Kingdom: Outside of Europe: U.S. and Canada: UL listed and CSA certified No. 18 AWG, Type SVT or SPT-2 China: CCC, CQC India:...
  • Page 182 United Kingdom Australia Europe Canada China User’s Manual...
  • Page 183 Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AACS: advanced access content system AC: Alternating current ACPI: Advanced Configuration and Power Interface ASCII: American Standard Code for Information Interchange BIOS: basic input/output system bps: bits per second CD: compact disc...
  • Page 184 Glossary IDE: integrated drive electronics IEEE: Institute of Electrical and Electronics Engineers I/O: input/output IrDA: Infrared Data Association IRQ: interrupt request KB: kilobyte LAN: local area network LCD: liquid crystal display LED: light emitting diode MB: megabyte MMC: multi media card OCR: optical character recognition (reader) PCB: printed circuit board PCI: peripheral component interconnect...
  • Page 185 Glossary analog signal: A signal whose characteristics such as amplitude and frequency vary in proportion to (are an analog of) the value to be transmitted. Voice communications are analog signals. application: A group of programs that together are used for a specific task such as accounting, financial planning, spreadsheets, word processing and games.
  • Page 186 Glossary cache memory: A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer's main memory. See also L1 cache, L2 cache. capacity: The amount of data that can be stored on a magnetic storage device such as a floppy diskette or hard disk drive.
  • Page 187 Glossary Composite Video (YUV): A standard video signal used to transmit images, e.g. from a VCR to a TV. computer program: A set of instructions written for a computer that enable it to achieve a desired result. computer system: A combination of hardware, software, firmware, and peripheral components assembled to process data into useful information.
  • Page 188 Glossary disk drive: The device that randomly accesses information on a disk and copies it to the computer°¶s memory. It also writes data from memory to the disk. To accomplish these tasks, the unit physically rotates the disk at high speed past a read-write head. disk storage: Storing data on magnetic disk.
  • Page 189 (FDD): An electromechanical device that reads and writes to floppy diskettes. Fn-esse: A TOSHIBA utility that lets you assign functions to hot keys. folder: An icon in Windows used to store documents or other folders. format: The process of readying a blank disk for its first use. Formatting establishes the structure of the disk that the operating system expects before it writes files or programs onto the disk.
  • Page 190 FN, can be used to set system parameters, such as speaker volume. HW Setup: A TOSHIBA utility that lets you set the parameters for various hardware components. icon: A small graphic image displayed on the screen or in the indicator panel.
  • Page 191 Glossary K: Taken from the Greek word kilo, meaning 1000; often used as equivalent to 1024, or 2 raised to the 10th power. See also byte and kilobyte. keyboard: An input device containing switches that are activated by manually pressing marked keys. Each keystroke activates a switch that transmits a specific code to the computer.
  • Page 192 Glossary mode: A method of operation, for example, the Shut Down Mode, Sleep Mode or the Hibernation Mode. modem: Derived from modulator/demodulator, a device that converts (modulates) digital data for transmission over telephone lines and then converts modulated data (demodulates) to digital format where received.
  • Page 193 The electrical connection through which the computer sends and receives data to and from devices or other computers. Power Saver: A TOSHIBA utility that lets you set the parameters for various power-saving functions. program: A set of instructions a computer can execute that enables it to achieve a desired result.
  • Page 194 Glossary Random Access Memory (RAM): Volatile memory that can be written to as well as read. Volatile here means that information in RAM is lost when you turn off your computer. This type of memory is used for your computer's main memory. See also memory. Compare ROM. resolution: A measure of the sharpness of the images that can be produced by a printer or displayed on a screen.
  • Page 195 TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology with thin film transistor (TFT) to drive each cell. Touch Pad: A pointing device integrated into the TOSHIBA computer palm rest. USB: Universal Serial Bus. This serial interface lets you communicate with several devices connected in a chain to a single port on the computer.
  • Page 196 External monitor, 1-5, 2-3, 8-10 charging, 6-5 problems, 9-17 extending battery life, 6-8 indicator, 2-11, 6-2 Monitoring capacity, 6-7 FN + 1 (TOSHIBA Zooming Utility real time clock, 1-5, 6-4 reduce), 5-5 save mode, 1-10 FN + 2 (TOSHIBA Zooming Utility types, 6-3...
  • Page 197 4-30 Mute, 5-3 connecting, 4-30 Output, 5-4 disconnecting, 4-31 Power Plan, 5-3 jack, 2-3 Sleep, 5-4 problems, 9-19 TOSHIBA Zooming Utility (enlarge), 5-5 TOSHIBA Zooming Utility Media care, 4-16 (reduce), 5-5 CD/DVDs, 4-16 Touch Pad, 5-4 Memory, 1-3 Wireless, 5-4...
  • Page 198 Overheating power down, 9-5 Password, 9-7 TOSHIBA Assist, 1-12 Pointing device, 9-12 TOSHIBA ConfigFree, 1-12 Power, 9-4 TOSHIBA Disc Creator, 1-12, 4-10 SD/SDHC memory card, miniSD/ TOSHIBA PC Diagnostic Tool, 1-11 microSD Card, 9-11 TOSHIBA support, 9-21 Self test, 9-4...
  • Page 199 Video RAM, 1-4 Volume control, 2-2 Web Camera, 1-6 Wireless communication, 4-28 indicator, 4-29 Wireless LAN, 1-6, 4-28 problems, 9-20 User’s Manual Index-4...

This manual is also suitable for:

Satellite l450d seriesSatellite pro l450 series

Table of Contents