30
VAIO® Reference Manual
8
If necessary, remove any add-in cards (see
Card"
on page 27) to gain access to the battery. You may also need to
disconnect some cables.
!
Touch any exposed metal part of chassis to discharge static electricity in
your body before handling an add-in card or other sensitive electronic
component.
9
Use your finger or a small flathead screwdriver push in on the small
tab inside the battery holder to pop out the battery.
10
Lift out the battery and dispose of it according to the instructions that
came with the new battery.
11
Insert the new battery into the battery holder, with the plus (+) side
up, and gently press down until the battery snaps into place.
The Sony CR2032 battery is recommended. Using a type of battery other than a
CR2032 may present a risk of fire or explosion.
12
Replace any add-in cards that were removed.
13
Reconnect any cables that were disconnected.
14
Replace the side panel (see
15
Reconnect the power cord and turn on the computer.
"Removing an Add-in
"Replacing the Side Panel"
KY0072.VSD
on page 25).