Table of Contents
Advertisement
33
3. Camera Operations
Full Menu Operations
Press and hold the MENU button to display
the full menu on the LCD monitor to specify
detailed settings (menu can also be displayed
on an external HDMI monitor in video
monitoring mode).
Menu Controls
MENU button (page 4)
Press and hold to display the full menu.
Press again while the full menu is
displayed to hide the menu.
Multi selector (8-way D-pad and apply
buttons) (page 4)
Press the 8-way D-pad buttons to move
the cursor up/down/left/right to select
menu items or settings.
Press the multi selector apply button to
apply the selected item.
Multi-function dial (page 4)
Turn the multi-function dial to move the
cursor up/down to select menu items or
settings.
Press the multi-function dial to apply the
selected item.
BACK button (page 4)
Press to return to the previous menu.
Unconfirmed changes are canceled.
[Notes]
• The full menu cannot be operated when in focus
magnifier mode (page 88).
• Some items cannot be selected, depending on the
state when the menu was displayed.
• When the LCD monitor is in information display mode,
operation using the multi selector on the operator
switch side of the unit or remote control is not
available.
Setting Menu Items
Press the 8-way D-pad buttons or turn the
multi-function dial to move the cursor to the
menu item to set, then press the apply button
or multi-function dial to select the item.
• The menu item selection area displays up
to eight lines. If the available options for an
item cannot be displayed at the same time,
scroll the display by moving the cursor up/
down.
• For sub-items with a large settings range
(for example, –99 to +99), the settings area
is not displayed. The current setting is
highlighted to indicate that the value can be
changed.
• Selecting Execute for a function will execute
the corresponding function.
• Selecting an item that requires confirmation
before execution will temporarily hide the
menu and display a confirmation message.
Check the message, and then select
whether to execute or cancel the function.
Entering a Character String
When you select an item, such as a file name,
which requires character entry, the character
entry screen appears.
1
2
3
1
Press the 8-way D-pad buttons or turn the
multi-function dial to select a character
type, then apply the setting.
ABC: Uppercase alphabetic characters
abc: Lowercase alphabetic characters
123: Numeric characters
!#$: Special characters
2
Select a character from the selected
character type, then apply the setting.
The cursor moves to the next field.
Space: Enters a space character at the
cursor position.
/: Moves the position of the cursor.
BS: Deletes the character on the left of
the cursor (backspace).
3
When finished, select Done and apply the
setting.
The character string is confirmed and the
character entry screen disappears.
Locking and Unlocking the Menu
You can lock the full menu so that only the
User menu is displayed.
In this state, settings cannot be changed using
the Home screen or status screens.
Locking the menu
1
Press and hold the multi-function dial and
press and hold the MENU button.
2
Select Menu Settings >User Menu with
Lock in the Technical menu.
[Note]
When you press and hold only the MENU button
to display the normal full menu, User Menu Only
is displayed under Menu Settings in the Technical
menu. Press and hold the multi-function dial and
press and hold the MENU button to display User
Menu with Lock.
3
Set to On, and press the apply button or
multi-function dial.
The LCD monitor display switches to the
passcode number input screen.
4
Enter an arbitrary number.
Enter a 4-digit number in the range 0000
to 9999. The default value is 0000.
Enter a number and press the apply
button or multi-function dial to move the
cursor to the next digit.
When all digits have been entered, move
the cursor to SET.
5
Press the apply button or multi-function
dial.
The entry is applied.
A confirmation message appears, and the
screen switches to the User menu display.
Advertisement
Table of Contents
