Table of Contents
Advertisement
28
3. Camera Operations
Status Screen
You can check the settings and status of the
unit on the status screen. The settings of items
marked with an asterisk (*) can be changed.
The status screen supports touch operation.
To display the status screen
• Press the MENU button.
[Tip]
You can show/hide each status screen using Menu Page
On/Off (page 59) in the Technical menu.
To switch the status screen
• Turn the multi-function dial.
• Push the multi selector up/down.
• Swipe the status screen up/down.
[Note]
When the LCD monitor is in information display mode,
operation using the multi selector on the operator
switch side of the unit or remote control is not available.
To hide the status screen
• Press the MENU button.
To change a setting
With the status screen displayed, press the
multi-function dial or multi selector to enable
selection of a setup item within a page. Select
a page number and then press to switch
pages.
You can also select items directly using touch
operation.
[Note]
You can disable changes from the status screen by
setting Menu Settings >User Menu Only (page 58) in
the Technical menu of the full menu to On.
Project status screen
Displays the basic settings related to the
shooting project.
Display item
Description
Frequency/Scan* System frequency and
scanning method settings
Codec*
Codec setting for recording
Rec Function*
Special recording function
On/Off setting and main
settings
Simul Rec*
2-slot simultaneous
recording function On/Off
status and setting
Reel
Camera ID and Reel Number
set values of clip name
Imager Scan*
Scan mode of the image
sensor
Video Format*
Picture size for recording to
memory cards
Picture Cache
Picture cache recording
Rec*
function On/Off and cache
size setting
Shot
Camera Position set value
and next/current recording
Shot Number value of clip
name
Shooting Mode*
Shooting mode settings
Proxy Rec*
Proxy recording function
On/Off setting
Genlock
Genlock state
Audio status screen
Displays the input setting, audio level meter,
and volume monitor setting for each channel.
Display item
Description
CH1
Level
Auto adjustment On/Off
Control
status
Level Meter Audio level meter
Source*
Input source
Reference*
Input reference level
Wind
Microphone wind noise
Filter*
reduction filter setting
CH2 Level
Auto adjustment On/Off
Control
status
Level Meter Audio level meter
Source*
Input source
Reference*
Input reference level
Wind
Microphone wind noise
Filter*
reduction filter setting
CH3 Level
Auto adjustment On/Off
Control*
status
Level
Audio level meter
Meter*
Source*
Input source
Reference*
Input reference level
Wind
Microphone wind noise
Filter*
reduction filter setting
CH4 Level
Auto adjustment On/Off
Control*
status
Level
Audio level meter
Meter*
Source*
Input source
Reference*
Input reference level
Wind
Microphone wind noise
Filter*
reduction filter setting
Audio Input
Audio input level (master
Level*
volume) setting
HDMI Output CH* HDMI output audio channel
setting
Volume*
Headphone/built-in speaker
volume setting
Display item
Description
Monitor CH*
Monitor channel setting
Monitoring status screen
Displays the SDI and HDMI output settings.
Display item
Description
SDI1
Signal*
Output picture size
Info.
Output display On/Off
Disp.*
setting
Gamut/
Monitor LUT application
Gamma*
status/color gamut set
value
SDI2
Signal*
Output picture size
Info.
Output display On/Off
Disp.*
setting
Gamut/
Monitor LUT application
Gamma*
status/color gamut set
value
HDMI
Signal*
Output picture size
Info.
Output display On/Off
Disp.*
setting
Gamut/
Monitor LUT application
Gamma*
status/color gamut set
value
LCD/
Gamut/
Monitor LUT application
Stream
Gamma*
status/color gamut set
value
Base Look/LUT*
Base Look/LUT setting
Gamma Display
Gamma Display Assist On/
Assist*
Off setting
[Tip]
In Custom mode, Color Gamut is displayed instead of
Gamut/Gamma.
Advertisement
Table of Contents
