Table of Contents
Advertisement
25
3. Camera Operations
Home Screen
Press the HOME button to display the Home screen. You can check the status of the unit and set
basic settings for the unit on the Home screen.
Item name/
Setting value/
Function display
area
[Notes]
• You cannot switch functions between auto/manual on the Home screen. Configure using the direct menu
(page 100) or using the Shooting menu of the full menu.
• In information display mode, the direct menu (page 100) cannot be used. First switch to the shooting screen
using the HOME button and then configure.
[Tip]
You can configure items displayed on the Home screen using only the LCD monitor by assigning the following to an
assignable button (page 100) on the LCD monitor.
• MENU
• IRIS (when using E-mount lens)
Item Name/Setting Value/Function Display Area
Status
display
area
[Note]
The areas labeled 1 to 6 correspond to ITEM buttons 1
to 6. Press an ITEM button to select the corresponding
item.
1.
FPS
Displays and sets the shooting frame rate.
2.
Exposure Index/Base ISO
Displays and sets the exposure index (EI) and
Base ISO.
[Tip]
In Custom mode, this displays and sets ISO/Base
Sensitivity or Gain/Base Sensitivity.
3.
Shutter
Displays and sets the electronic shutter.
ITEM button 1
ITEM button 2
ITEM button 3
1
2
4
5
6
ITEM button 4
ITEM button 5
ITEM button 6
4.
ND Filter
Displays and sets the ND filter.
[Note]
In VARIABLE mode, the ND filter cannot be configured on
the Home screen. Configure using the ND filter buttons
and dial on the operator switch side of the unit.
5.
Look
Displays and sets the look.
[Tip]
In Custom mode, this displays and sets scene files.
6.
WB (White Balance)
Displays and sets the white balance.
3
Advertisement
Table of Contents
