Table of Contents
Advertisement
119
7. Appendix: Error/Warning Messages
LCD monitor warning
Warning
display
sound
Transfer Jobs Full
–
1) "(B)" is displayed for the card in slot B.
2) You can select and delete jobs using File Transfer >View Job List (page 63) in the Network menu of the full menu.
You can also delete jobs from the job list in the Monitor & Control application.
Recording/
Cause and Solution
tally lamp
–
The number of FTP file transfer jobs that can be
registered has reached the upper limit. To add
another job, first delete any unwanted jobs.
Caution and Operation Messages
The following caution and operation messages may appear in the center of the screen.
2)
Follow the instructions provided to resolve the issue.
Display message
Battery Error
Please Change Battery
Backup Battery End
Please Change
Unknown Media (A)
1)
Please Change
Cannot Use Media (A)
1)
Unsupported File System
Media Error
Media (A)
Needs to be Restored
1)
Media Error
Cannot Record to Media (A)
1)
Media Error
Cannot Use Media (A)
1)
Media (A)
1)
Error
Recording Halted
Playback Halted
Media Reached Rewriting Limit
Change Media (A)
1)
The specified address is invalid.
Cannot Use Specified Port Number
Cause and Solution
An error was detected in the battery pack.
Replace with a normal battery pack.
The remaining capacity of the backup battery is insufficient.
Charge the backup battery.
A memory card that has been partitioned or a memory card
containing more clips that can be handled by the unit was
inserted.
The card cannot be used in the unit, and must be replaced.
A card using a different file system or an unformatted card
was inserted.
The card cannot be used in the unit, and must be replaced or
formatted using the unit.
An error occurred on the memory card, and the card must be
restored.
Restore the memory card.
The memory card may be damaged, and can no longer be
used for recording.
Playback may be possible, so making a copy and replacing the
memory card is recommended.
The memory card may be damaged, and can no longer be
used for recording or playback.
The card cannot be used in the unit, and must be replaced.
Recording or playback stopped because an error occurred on
the memory card.
If the problem persists, replace the memory card.
The memory card has reached the end of its life.
Make a backup, and replace the card immediately. If you
continue using the card, the card may not be able to record or
play.
For details, refer to the operating instructions for the memory
card.
The specified address is invalid.
Check that the setting is correct.
The specified port number is invalid.
Check that the setting is correct.
Advertisement
Table of Contents
