Table of Contents
Advertisement
A350/A350D
Never allow metal objects, such as screws, staples and paper clips,
to enter the computer or keyboard. Foreign metal objects can create a
short circuit, which can cause computer damage and fire, possibly
resulting in serious injury.
Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access
problems.
5. Seat the memory module cover in place and secure it with one screw.
Take care to ensure that the memory module cover is firmly closed.
6. Install the battery pack - refer to
Chapter 6,
7. Turn your computer over.
8. Turn the computer on and make sure the added memory is recognized -
to confirmed it, Start -> Control Panel -> System and Maintenance ->
System icon.
Removing a memory module
To remove the memory module, follow the steps as detailed below:
1. Set the computer to Boot Mode and turn its power off - make sure the
Power indicator is off (refer to the
Chapter 3,
2. Remove the AC adaptor and all cables and peripherals connected to
the computer.
3. Turn the computer upside down and remove the battery pack (refer to
Replacing the battery pack
Modes, if required).
8-10
Memory module cover
Figure 8-7 Seating the memory module cover
Power and Power-up
Getting Started
if required).
section in Chapter 6,
screws
Replacing the battery pack
Modes, if required.
Turning on the power
Power and Power-up
section in
section in
User's Manual
Advertisement
Chapters
Table of Contents
