Table of Contents
Advertisement
Item
19. QUIET mode
When the "Quiet mode" selected from [ QUIET ] button;
The fan of the indoor unit will be restricted the
-
revolving speed at speed UL.
The compressor speed is controlled as shown
-
in the figure.
Model
Cool/Heat min (Hz)
Quiet Cool (Hz)
Quiet Heat (Hz)
The '' Quiet mode '' is canceled by [ QUIET ]
button is pressed to select other speed.
20. Display lamp
To decrease the display lamp brightness or turn it off.
brightness
1. Press and hold
adjustment
2. Press
Remote control
● In the examples of
going off.
Operation flow and applicable data,etc
RAS-25E2KVG-ND
20
21
27
FAN
or
) is shown on remote control LCD then release the button.
or
Rise
Decrease
Operation display
LCD
Lamp illuminates full brightness.
Lamp illuminates 50% brightness.
Lamp illuminates 50% brightness and the
operation lamp is turned off.
All lamps are turned off.
and
Quiet mode is the system which, control the
revolving speed of indoor fan to work
constantly at lower than speed L. In addition,
noise level of indoor unit is less than usual.
Remarks :
1.
Quiet mode is unable to work in dry mode.
RAS-35E2KVG-ND
2.
Quiet mode is appropriate to work with less
20
cooling load and less heating load condition.
22
Because of the fan speed L- may cause not
enough the cooling capacity or heating
30
capacity.
for 3 seconds until brightness level (
to adjust brightness in 4 levels.
Brightness
100%
50%
50%
All turned off
, the lamp illuminates for 5 seconds before
- 42 -
Description
,
,
Advertisement
Chapters
Table of Contents
