Sony SRS-XP700 Help Manual page 34

Hide thumbs Also See for SRS-XP700:

Table of Contents

Hint

The above instructions on the computer are provided as an example. For details, refer to the operating instructions supplied with

your computer. In addition, not all the computers are tested and found compatible with the above procedure and the procedure is

not applicable to home-built computers.

The speaker is capable of keeping up to 2 BLUETOOTH devices connected concurrently. When playback starts on one device

while music playback is in progress on the other, the speaker switches the audio source from the latter to the former and starts

outputting sound from the switched source device (Multi-device connection).

Note

The pairing mode of the speaker is released after about 5 minutes and the (BLUETOOTH) indicator flashes slowly. However,

when the speaker has no pairing information, such as at the factory settings, the pairing mode is not released. If the pairing mode

is released before finishing the process, repeat from step

Once BLUETOOTH devices are paired, there is no need to pair them again, except in the following cases:

Pairing information has been deleted after repair, etc.

The speaker is already paired with 8 devices and another device is to be paired.

The speaker can be paired with up to 8 devices. If a new device is paired after 8 devices have already been paired, the device

that was paired earliest is replaced by the new one.

The pairing information with the speaker has been deleted from the BLUETOOTH device.

The speaker is initialized.

All pairing information will be deleted. If you initialize the speaker, it may not be able to connect your computer. In this case,

erase the pairing information of the speaker on your computer, and then perform the pairing procedure again.

The speaker can be paired with multiple devices, but can only play music from one paired device at a time.

The passkey of the speaker is "0000." If a passkey besides "0000" is set on the BLUETOOTH device, pairing cannot be done

with the speaker.

When using the Stereo Pair function or Party Connect function, you cannot use the multi-device connection.

Table of Contents

Srs-xp500