Page 1 User’s Guide If you need assistance, use one of the following: Toshiba’s Support Website pcsupport.toshiba.com Toshiba Global Support Centre Calling within the United States (800) 457-7777 Calling from outside the United States (949) 859-4273 For more information see page 217 in this guide.
Page 2 AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT OPERATION OF THE PRODUCT WILL BE UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA, ITS AFFILIATES AND SUPPLIERS SHALL HAVE NO RESPONSIBILITY FOR DAMAGE TO OR LOSS OF ANY BUSINESS, PROFITS, PROGRAMS, DATA OR...
Page 3 Only Peripherals complying with the FCC Class B limits may be attached to this equipment. Operation with noncompliant peripherals or peripherals not recommended by Toshiba is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer's parallel port, monitor port, USB port, PS/2 port and microphone jack.
Page 4: Industry Canada Requirement
This device must accept any interference received, including interference that may cause undesired operation. Contact either: Toshiba’s Support Website at pcsupport.toshiba.com Or call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Industry Canada requirement This Class B digital apparatus complies with Canadian ICES-003.
Page 5: Telephone Company Procedures
If trouble is experienced with this equipment, for repair or limited warranty information, please contact Toshiba Corporation, Toshiba America Information Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Support Centre within the United States at (800) 457-7777 or Outside the United States at (949) 859-4273.
Page 6 provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges.) In order to program this information into your fax transmission, refer to the fax software instructions installed on this computer. Alarm Equipment If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm...
Page 7: Wireless Interoperability
USOC RJ11C. Wireless Interoperability The TOSHIBA Wireless LAN Mini PCI Card products are designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS) radio technology, and is compliant to: The IEEE 802.11 Standard on Wireless LANs (Revision A/B/G), as defined...
Page 8: Wireless Lan And Your Health
Wireless LAN device prior to turning on the equipment. Regulatory Information The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. This device complies with the following radio frequency and safety standards.
Page 9 ETS 300 328 Technical requirements for radio equipment ETS 300 826 General EMC requirements for radio equipment English: Hereby, TOSHIBA Corp. Digital Media Network Company, declares that this Radio LAN device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
Page 10 Radio LAN device in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Bij deze TOSHIBA Corp. Digital Media Network Company dat deze Radio LAN device voldoet aan de essentiële eisen en aan de overige relevante bepalingen van Richtlijn 1999/5/EC.
Page 11 The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is far below the FCC radio frequency exposure limits. Nevertheless, the TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that the potential for human contact during normal operation is minimized. In normal operating configuration, the LCD in the upright position, the distance between the antenna and the user should not be less than 20 cm.
Page 12 GHz to 5.25 GHz frequency band must be integral antenna which provide no access to the end user. Refer to the Regulatory Statements as identified in the documentation that comes with those products for additional information. Radio Frequency Interference Requirements This device is restricted to indoor use due to its operation in the 5.15 GHz to 5.25 GHz frequency range.
Page 13 The interference range of this equipment is less than 40m. 2,400 MHz to 2,483.5 MHz. It is possible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100...
Page 14: Device Authorization
Device Authorization This device obtains the Technical Regulation Conformity Certification and the Technical Conditions Compliance Approval, and it belongs to the device class of radio equipment of low-power data communication system radio station stipulated in the Radio Law and the Telecommunications Business Law of Japan. The Name of the radio equipment: refer to the equipment label provided on the computer JAPAN APPROVALS INSTITUTE FOR TELECOMMUNICATIONS...
Page 15 802.11b (2.4 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Europe - Restrictions for use of 2.4 GHz Frequencies in European Community Countries België/ For private usage outside buildings across public grounds over less than Belgique: 300m no special registration with IBPT/BIPT is required. Registration to IBPT/BIPT is required for private usage outside buildings across public grounds over more than 300m.
Page 16 E’necessaria la concessione ministeriale anche per l’uso interno. Verificare con i rivenditori la procedura da seguire. Nederland: License required for outdoor installations. Check with reseller for procedure to follow. Licentie verplicht voor gebruik met buitenantennes. Neem contact op met verkoper voor juiste procedure. 802.11a (5 GHz) Australia Canada...
Page 17 To remain in conformance with European spectrum usage laws for Wireless LAN operation, the above 2.4 GHz and 5 GHz channel limitations apply. The user should use the wireless LAN utility to check the current channel of operation. If operation is occurring outside of the allowable frequencies as listed above, the user must cease operating the Wireless LAN at that location and consult the local technical support staff responsible for the wireless network.
Page 18 802.11b (2.4 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland 802.11a (5 GHz) Australia Canada France Ireland Luxembourg Norway Switzerland Turbo Mode (5 GHz) Canada Approved Countries/Regions for use for the Intel Wireless LAN 2100 3B Mini PCI Adapter This equipment is approved to the radio standard by the countries/regions in the following table.
Page 19 Mexico Norway Singapore Switzerland Approved Countries/Regions for use for the Toshiba Mini PCI Wireless LAN Card This equipment is approved to the radio standard by the countries/regions in the following table. Do not use this equipment except in the countries/regions in the following table.
Page 20: Bluetooth Wireless Technology Interoperability
Always use Bluetooth™ cards from TOSHIBA in order to enable wireless networks over two or more (up to a total of seven) TOSHIBA portable computers using these cards. Please contact TOSHIBA PC product support on Web site http://www.toshiba-europe.com/computers/tnt/bluetooth.htm in Europe or pcsupport.toshiba.com in the United States for more information.
Page 21: Bluetooth Wireless Technology And Your Health
Because products with Bluetooth wireless technology operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Bluetooth wireless technology is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
Page 22 The radiated output power of the Bluetooth™ Card from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth™ Card from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.
Page 23 NOTE Changes or modifications made to this equipment not expressly approved by TOSHIBA or parties authorized by TOSHIBA could void the user’ s authority to operate the equipment. Taiwan Article 14 Unless approved, for any model accredited low power radio frequency...
Page 24 This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile object identification systems. 3. TOSHIBA Direct PC Monday – Friday: 10:00 – 17:00 Toll Free Tel: 0120-13-1100 Direct Dial: 03-3457-5916...
Page 25 Multi-drive or any other optical drive. You could damage the drive. You would also be exposed to laser light or other safety hazards, resulting in serious injury. Always contact an authorized Toshiba service provider, if any repair or adjustment is required.
Page 26 Copyright This guide is copyrighted by Toshiba America Information Systems, Inc. with all rights reserved. Under the copyright laws, this guide cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed, however, with respect to the use of the information contained herein.
Page 27 ConfigFree is a trademark of Toshiba Corporation. Wi-Fi is a registered trademark of the Wi-Fi Alliance. Dolby - Manufactured by Toshiba under license from Dolby Laboratories/ Dolby and the double-D symbol are trademarks of Dolby Laboratories. TouchPad is a trademark of Synaptics, Inc.
Page 28: Table Of Contents
Keeping yourself comfortable ...43 Precautions...43 Important information on your computer’s Setting up your computer ...46 Setting up your software...46 Registering your computer with Toshiba ...48 Adding external devices ...48 Connecting to a power source ...49 Charging the main battery...52 cooling fan ...45...
Page 29 Using the computer for the first time ...52 Opening the display panel ...52 Your computer’s features and specifications ...53 Turning on the power...54 Using the Toshiba Dual Pointing Device ...55 Using the TouchPad™...55 Disabling or enabling the Dual Pointing Device.56 Installing a memory module ...57 Removing a memory module...61...
Page 30 Contents Moving the computer...85 Using a computer lock ...85 Chapter 2: Learning the Basics... 87 Computing tips ...87 Using the keyboard ...89 Character keys ...89 Making your keyboard emulate a full-size key- Ctrl, Fn, and Alt keys ...90 Function keys...90 Windows Overlay keys ...91 Starting a program...93...
Page 31 Standby command...109 Using Turn Off or Shut down ...110 Using hibernation mode...113 Using Standby mode...116 Toshiba’s online resources ...120 Chapter 3: Mobile Computing... 121 Toshiba’s energy-saver design...121 Running the computer on battery power ...122 Battery Notice ...122 Using additional batteries ...123 Charging the batteries...123...
Page 32 Exploring audio features ...157 Using external speakers or headphones...157 Recording sounds...158 Using a microphone...158 Using tablet mode...159 Preparing to use the tablet ...160 Using the Toshiba tablet pen...162 ® XP special features ...140 your system tray ...152 the Internet ...156...
Page 33 Removing an optional SD card ...169 Using Slim SelectBay Removing a module from the Slim SelectBay .170 Inserting a module into the Slim SelectBay...171 Chapter 5: Toshiba Utilities... 172 Fn-esse ...173 Starting Fn-esse...173 Assigning a key to a program or document ...174 Viewing existing key assignments ...177...
Page 34 TOSHIBA Hardware Setup...188 The Toshiba Rotation Utility...190 Tablet and Pen Settings ...192 Cross Menu Utility ...193 Creating a New Menu...194 TOSHIBA Tablet Access Code Utility ...195 TOSHIBA Zooming Utility...196 TOSHIBA Button Controls ...198 CD/DVD Drive Acoustic Silencer ...199 TOSHIBA Accessibility ...200 Toshiba Mobile Extension ...201...
Page 35 Wireless device problems ...244 DVD operating problems...247 Develop good computing habits ...250 Data and system configuration backup If you need further assistance...257 Before you contact Toshiba ...257 password in System Setup ...213 tem Setup ...215 ® operating system is not working..221 ®...
Page 36 Contents Contacting Toshiba ...258 Other Toshiba Internet Web sites ...259 Toshiba’s worldwide offices...259 Appendix A: Hot Keys ... 261 Volume Mute ...261 Password security ...261 Without a password ...261 With a password ...262 Power usage mode ...262 Standby Mode...263 Hibernation mode ...264 Display modes ...265...
Page 37 Using the Automatic Switch...293 Semi-Automatic Switch Feature ...294 Glossary...295 Acronyms ...295 Terms ...297 Index ...310 Contents...
Page 38: Introduction
Toshiba's Web site at pcsupport.toshiba.com. While Toshiba has made every effort at the time of publication to ensure the accuracy of the information provided herein, product specifications, configurations, prices, system/ component/options availability are all subject to change without notice.
Page 39: This Guide
This guide This guide introduces the computer’s features. You can: Read the entire guide from beginning to end. Skim through and stop when a topic interests you. Use the table of contents and the index to find specific information. Safety icons This manual contains safety instructions that must be observed in order to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of...
Page 40: Other Icons Used
Other documentation Your computer comes with the following documentation: An electronic version of the user’s guide. It may also contain guides for other programs that may come with your system. For accessory information, visit Toshiba's Web site at accessories.toshiba.com.
Page 41: Service Options
Toshiba Web site pcsupport.toshiba.com. If you have a problem or need to contact Toshiba see “If Something Goes Wrong” on page...
Page 42: Chapter 1: Getting Started
Chapter 1 Getting Started This chapter provides tips for working comfortably, summarizes how to connect components, and explains what to do the first time you use your notebook computer. Selecting a place to work Your computer is portable and designed to be used in a variety of circumstances and locations Creating a computer-friendly environment Place the computer on a flat surface that is large enough for...
Page 43: Keeping Yourself Comfortable
Extreme heat, cold, or humidity Liquids and corrosive chemicals Keeping yourself comfortable The Toshiba Instruction Manual for Safety and Comfort contains helpful information for setting up your work environment and tips for working comfortably throughout the day. Precautions Your computer is designed to provide optimum safety and ease of use, and to withstand the rigors of travel.
Page 44 Getting Started Selecting a place to work Failure to follow these instructions could result in seri- ous injury or permanent damage to the computer. Do not turn on the power again until you have taken the computer to an authorized service center. If you experience discomfort while operating the computer, stop immediately and rest.
Page 45: Important Information On Your Computer's Cooling Fan
Never turn off the computer if a drive light indicates a drive is active. Powering off the computer while it is reading from or writing to a disk may damage the disk, the drive, or both. Keep the computer and diskettes away from objects that generate strong magnetic fields, such as large stereo speakers.
Page 46: Setting Up Your Computer
Getting Started Setting up your computer The cooling fan location will vary depending on the computer. NOTE Setting up your computer TECHNICAL NOTE: You must complete all setup steps up to and including adding external or internal components to your computer. These components include, but are not limited to, a mouse, keyboard, printer, memory, and PC cards.
Page 47 The first time you turn on your computer, a keyboard, which is NOTE used with the tablet pen, appears on your screen. Use the click and drag method to move the keyboard to another part of the screen, if desired. To drag the screen to another location, click on the keyboard's Title Bar, and then hold it while you drag it to its new location.
Page 48: Registering Your Computer With Toshiba
If you opt not to register at that time, you can either double-click the icon on your desktop or go to the Toshiba Web site at register.toshiba.com. Customer failure to complete Product Registration will not diminish Customer rights under this limited Warranty.
Page 49: Connecting To A Power Source
Connect a local printer (see page Install PC Cards (see Connecting to a power source Your computer requires power to operate. Use the power cord/cable and AC adapter cord to connect the computer to a live electrical outlet or to charge the computer’s battery. Power cord/cable Sample power cord/cable and AC adapter cord Never pull on a power cord/cable to remove a plug from a...
Page 50 As a general safety precaution, avoid touching any metal parts. Always use the Toshiba AC adapter that was provided with your computer, or use Toshiba recommended alternate models to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adapter could cause fire or damage to the computer, possibly resulting in serious injury.
Page 51 Plug the AC adapter cord into the DC-IN on the back of the computer. Sample connecting the AC adapter cord to the computer Connect the power cord/cable to a live electrical outlet. The AC power indicator glows when the computer is connected to an external power source.
Page 52: Charging The Main Battery
Getting Started Charging the main battery Charging the main battery Your computer came with its battery already installed. Before using the battery to power the computer, you must first charge To charge the battery, leave the computer plugged in until the battery light glows green.
Page 53: Your Computer's Features And Specifications
To learn how to rotate the display panel or use your computer in tablet mode see page While in Primary Landscape mode you can use FN + Spacebar NOTE to change the screen resolution from 1450 x 1050 to 1024 x 768 to 800 x 600 (repeated use will recycle the resolutions).
Page 54: Turning On The Power
Getting Started Using the computer for the first time Below are examples of some of the many possible icons that may come with your computer: Sample system icons Turning on the power The first time you turn on the computer you should not have any accessories or third-party devices attached.
Page 55: Using The Toshiba Dual Pointing Device
TouchPad TouchPad primary button Sample Toshiba Dual Pointing Device buttons Toshiba Dual Pointing Device—Moves the cursor and selects items on the screen. To move the cursor, gently push the pointing device in the direction you want the cursor to move. Pushing harder on the pointing device moves the cursor faster.
Page 56: Disabling Or Enabling The Dual Pointing Device
Getting Started Using the Toshiba Dual Pointing Device To move the cursor to the bottom of the page, drag your finger toward yourself. To move the cursor to the right side of the page, slide your finger across the TouchPad from left to right.
Page 57: Installing A Memory Module
Installing a memory module HINT: To purchase additional memory modules see the accessories information packaged with your system or visit accessories.toshiba.com. Before you install or remove a memory module, turn off the computer using the Start menu. If you install or remove a memory module while the computer is in standby or hibernation mode, data will be lost.
Page 58 Additional memory comes in various capacities (to stay current on the most recent software and hardware options for your computer, and for other product information, be sure to regularly check the Toshiba Web site at accessories.toshiba.com). Additional memory modules can be installed in the memory expansion slots on the base of the computer.
Page 59 Close the display panel and remove any cables you may have connected to the computer, including the AC adapter cord/cable. Before you turn the computer over, make sure that the computer display is properly closed and is not in tablet mode. Setting the computer down on the display may cause damage to the screen.
Page 60 Getting Started Installing a memory module Sample removing the memory slot cover screws Place the screw and the cover in a safe place so that you can retrieve them later. Static electricity can damage the memory module. Before you handle the module, touch a grounded metal surface to discharge any static electricity you may have built up.
Page 61: Removing A Memory Module
Sample inserting the memory module Avoid touching the connectors on the memory module or on the computer. Grease or dust on the connectors may cause memory access problems. Replace the memory slot cover. Replace the screw and tighten it. Turn the computer over and reconnect any cables you removed.
Page 62 Getting Started Installing a memory module Do not try to remove a memory module with the computer turned on. You can damage the computer and the device. Do not remove the memory module while the computer is in standby mode. The computer could hang up the next time you turn it on and data in memory will be lost.
Page 63: Hard Drive Recovery Utilities
Replace the memory slot cover and the screw. Restart the computer. TECHNICAL NOTE: You must have at least one memory module installed for the computer to work. Hard Drive Recovery Utilities Your computer has been configured with a hard disk partition to allow you to recover your hard disk drive or reinstall selected applications and software features or utilities.
Page 64: Creating Recovery Cds/Dvds
The system will prompt you to insert the appropriate amount of NOTE CDs or DVDs to copy the Hard Drive Recovery Utilities. If your optical disk drive is not writable, contact TOSHIBA Customer Support to obtain the Recovery media for your system. To create recovery CDs/DVDs: Double-click the Recovery Disc Creator icon on the Windows desktop.
Page 65: Hard Disk Drive Recovery Using The Recovery Partition
Make sure the computer is turned off. Press and hold the 0 (zero) key on your keyboard while powering on the computer. When the computer powers on, the TOSHIBA HDD Recovery Utility screen displays. Getting Started Hard Drive Recovery Utilities...
Page 66 Getting Started Hard Drive Recovery Utilities Sample TOSHIBA HDD Recovery Utility screen Recovering the original factory image (recommended) Recovering a hard disk drive to its factory default setting deletes all partitions on the hard disk drive and your information will be lost. Be sure to save your work first.
Page 67 To recover only your C: drive: Press 2 on the keyboard when the TOSHIBA HDD Recovery Utility screen displays. A confirmation message appears, reminding you that all information on the C: drive will be lost during the recovery process.
Page 68: Hard Disk Drive Recovery Using The Recovery Media
To recover your hard disk drive using the utilities burned to CDs or DVDs (refer to page 64): Insert the first recovery CD or DVD into your CD/DVD drive and power on the computer. When the computer powers on, the TOSHIBA HDD Recovery Utility screen displays. “Creating Recovery CDs/DVDs” on...
Page 69 Sample TOSHIBA HDD Recovery Utility screen Recovering the original factory image (recommended) Recovering a hard disk drive to its factory default setting deletes all partitions on the hard disk drive and your information will be lost. Be sure to save your work first.
Page 70 To recover only your C: drive: Press 2 on the keyboard when the TOSHIBA HDD Recovery Utility screen displays. A confirmation message appears, reminding you that all information on the C: drive will be lost during the recovery process.
Page 71: Deleting The Hard Disk Recovery Utility
To recover your C: drive without the recovery partition: Press 3 on the keyboard when the TOSHIBA HDD Recovery Utility screen displays. A confirmation message appears, reminding you that all partitions will be reformatted and all data will be lost during the recovery process. Be sure you have saved your work before proceeding.
Page 72: Installing Drivers And Applications
(for example, E: drive) for the extra space and formats the drive. Installing drivers and applications The TOSHIBA Application Installer allows you to reinstall the drivers and applications that were originally bundled with your computer.
Page 73: Connecting An External Usb Keyboard
Start, All Programs, Hard Disk Recovery Utilities, and then Toshiba Application Installer. Click Next. Click the item(s) you want to install. Click Install. Follow the on-screen prompts to complete the installation process. Connecting an external USB keyboard You can attach an external standard keyboard to a USB port on your computer, provided the keyboard is USB-compatible.
Page 74: Connecting A Printer
Getting Started Connecting a printer The operating system automatically detects the mouse. The mouse and TouchPad can be used at the same time. Connecting a printer Your printer documentation may require you to install the NOTE printer software before physically connecting the printer to your computer.
Page 75: Setting Up A Printer
Setting up a printer If you have a printer, follow these steps to set it up for the first time. You only need to set up the printer once. Click Start, Printers and Faxes. The Printers and Faxes window appears. Click Add a Printer.
Page 76: Using Your Computer In Tablet Mode
Getting Started Using your computer in tablet mode Using your computer in tablet mode One of your computer’s features is a convertible display that allows you to use the screen much as you would a writing tablet. Sample rotating the screen To use your system in tablet mode, open your computer, carefully rotate the screen clockwise 180 degrees, and fold the screen down on top of the keyboard.
Page 77 Included with your computer is the Cross Menu application NOTE which allows you to make Hot Key assignments, access other Toshiba utilities, and create your own custom menus. For details on using the Cross Menu, refer to on page 193.
Page 78: Using External Display Devices
Getting Started Using external display devices Using external display devices Your computer comes with a built-in LCD display, but you can easily attach an external monitor to your computer if you need a larger screen. To do this: Connect the monitor’s video cable to the RGB (monitor) port on the back of the computer.
Page 79 External monitor only TV/LCD Release the TECHNICAL NOTE: Set the option for the video controller by clicking Start, then Control Panel and clicking Display. Choose the Settings tab, click the Advanced button, select Display Device, select the applicable Monitor type, click Apply or OK.
Page 80 Getting Started Using external display devices Use this button to change the display orientation to match the way the computer is being used. For example, if you are using the computer in landscape mode and you rotate it 90 degrees to be in tablet mode, you can then rotate the display orientation to match the new computer orientation, which is now portrait.
Page 81: Adjusting The Quality Of The External Display
Using the Cross Menu Utility The Cross Menu Utility allows you to make Hot Key assignments to launch applications, access Toshiba utilities, or create your own custom menus. It is used in conjunction with the Cross-Functional button. For information about this utility see page 193.
Page 82: Turning Off The Computer
Getting Started Turning off the computer part of the desktop will appear on the screen. You can view the “lost” area by scrolling to it. If you use the display hot key ( display output with the LCD Display Stretch option enabled and the Display area (resolution) set to 640 x 480 or 800 x 600, the image on the internal display panel may appear stretched.
Page 83: Closing The Display Panel
operating system uses the Shut down command to power down the computer if you are connected to a Windows network server (domain server) or the Turn Off command if you are not connected. Never turn off the computer while any drive is in use. Doing so may damage the media in use and result in loss of data.
Page 84: Caring For Your Computer
Getting Started Caring for your computer For more information see page 113 Caring for your computer To charge the main battery, plug the computer into a live wall outlet. It takes several hours to charge the battery with the computer off. It takes much longer to charge the battery while the computer is on.
Page 85: Cleaning The Computer
You may want to secure your computer to a heavy object such as your desk. The easiest way to do this is to purchase an optional PORT-Noteworthy computer lock cable. For more information on purchasing a cable lock, visit accessories.toshiba.com. Sample PORT-Noteworthy computer lock cable Getting Started Caring for your computer...
Page 86 Getting Started Caring for your computer To secure the computer: Wrap the cable through or around some part of a heavy object. Make sure there is no way for a potential thief to slip the cable off the object. Pass the locking end through the loop. Insert the cable’s locking end into the security lock slot on the left side of your computer, then engage the locking device.
Page 87: Chapter 2: Learning The Basics
Chapter 2 Learning the Basics This chapter lists computing tips and provides important information about the system’s basic features. Computing tips Save your work frequently. Your work temporarily stays in the computer’s memory until you save it to the hard disk. You will lose all unsaved work if, for example, a system error occurs and you must restart your computer, or your battery runs out of charge while you are working.
Page 88 Learning the Basics Computing tips Back up your files to discs (or other removable storage media) on a regular basis. Label the backup copies clearly and store them in a safe place. If your hard disk suddenly fails, you may lose all the data on it unless you have a separate backup copy.
Page 89: Using The Keyboard
Using the keyboard Your computer’s keyboard contains character keys, control keys, function keys, and special Windows provide all the functionality of a full-size keyboard. Sample keyboard Character keys Typing with the character keys is very much like typing on a typewriter, except that: The spacebar creates a space character instead of just passing over an area of the page.
Page 90: Ctrl, Fn, And Alt Keys
Learning the Basics Using the keyboard of the specially marked keys on your computer’s built-in keyboard allows you to emulate a full-size keyboard. The emulation Fn key and the Wake up on Keyboard while in NOTE standby mode are only functional when using the internal keyboard;...
Page 91: Windows ® Special Keys
through programmed functions when pressed. Used in combination with the specific functions on the computer. For more information see “Fn-esse” on page Hot keys When used in combination with the Fn key, function keys marked with icons run programmed functions specific to your computer.
Page 92: Using The Overlay To Type Numeric Data
Learning the Basics Using the keyboard Sample numeric and cursor control overlay Using the overlay to type numeric data The keys with the numbers on their right front are the numeric overlay keys. To turn the numeric overlay on, press simultaneously.
Page 93: Starting A Program
To turn off the numeric overlay, hold down the press again. The numeric mode light on the keyboard indicator panel goes out. Using the cursor control overlay To turn on the cursor control overlay, press simultaneously. The cursor control mode light on the keyboard indicator panel glows when the cursor control overlay is on.
Page 94: Starting A Program From The Start Menu
Learning the Basics Starting a program Use the Start menu. Use Windows Use the Run dialog box. The next three sections explain how to start a program from the Start menu, Explorer, and the Run dialog box. Starting a program from the Start menu When you install a program, the operating system usually puts an icon in the All Programs menu.
Page 95: Starting A Program From The Run Dialog Box
This example opens WordPad using its file name, wordpad.exe. Click Start, then point to All Programs. Click Accessories. Click Windows Explorer. In the left pane of the window, click My Computer to expand the window. In the left pane of the window, click Local Disk (C:). In the left pane of the window, click the folder containing the program, in this case Program Files.
Page 96 Learning the Basics Starting a program Sample Run dialog box In the Run dialog box: For a program in the Windows program name. Otherwise, if you know the program’s location, type the full file path. Then click OK. If you do not know the program’s location, you can search for it by clicking Start, and then Search.
Page 97: Saving Your Work
Saving your work Before you turn off the computer, save your work to the hard disk drive or a diskette. Always save your data even when you are using the Stand By command. If your battery fully discharges, your information will be lost.
Page 98: Printing Your Work
Learning the Basics Printing your work unlikely to recognize an unusual extension and may refuse to handle your file correctly. TECHNICAL NOTE: By default, the Windows system does not show file extensions. For information on showing or hiding the extensions see your Windows online help.
Page 99: Using The Dvd-Rom Or Multi-Function Drive
Using the DVD-ROM or multi-function drive Using the DVD-ROM or multi-function drive Optical storage has become the preferred medium for software, music, and video. Digital versatile discs (DVDs) provide a significant increase in data storage and support features that are not available on any other video platform. These features include wide-screen movies, multiple language tracks, digital surround sound, multiple camera angles, and interactive menus.
Page 100: Drive Components And Control Buttons
Learning the Basics Using the DVD-ROM or multi-function drive Drive components and control buttons The DVD-ROM or multi-function drive is located on the right side of the computer. Your DVD-ROM or multi-function drive may look like this: Eject button Manual eject hole Sample DVD-ROM or multi-function drive shown Drive in-use indicator light—Indicates when the drive is in use.
Page 101: Inserting Discs (Cd Or Dvd)
Using the DVD-ROM or multi-function drive Inserting discs (CD or DVD) To insert a disc into the drive: Make sure the computer is turned on. Make sure the drive-in-use indicator light is off. Press the drive’s eject button. The disc tray slides partially out of the drive (about 1 inch).
Page 102 Learning the Basics Using the DVD-ROM or multi-function drive Place the disc carefully in the disc tray, label side up. Sample positioning the disc in the drive Gently press the disc onto the center spindle until you feel it click into place. Be careful not to touch the drive’s lens (located underneath the drive’s spindle) or the area around it.
Page 103: Playing An Audio Cd
Using the DVD-ROM or multi-function drive Playing an audio CD Before playing an audio CD, turn the volume down. Playing the compact disc at maximum volume could damage your ears. To turn the volume down, use the Volume Control switch or access the Volume Control program (click Start, All Programs, Accessories, Entertainment, Volume Control).
Page 104: Playing Cds Using Auto-Run
Learning the Basics Using the DVD-ROM or multi-function drive Sample Windows Media Player screen The Windows Media Player control panel works much like an ordinary compact disc player: To play or pause the CD, click the Play/Pause button on the CD Player control panel. To stop the CD, click the Stop button.
Page 105: Creating A Cd
Using the DVD-ROM or multi-function drive example, if it is a music CD, open Windows and point it to play the CD. For other types of media, use the associated software to open the files on the disk. Creating a CD Depending on your computer’s configuration, your computer may come with a multi-function drive that allows you to: Play pre-recorded DVDs...
Page 106: Removing A Disc With The Computer Off
Learning the Basics Using the DVD-ROM or multi-function drive Grasp the disc tray and pull it fully open. Remove the disc from the disc tray and place it in its protective cover. If the disc is spinning when you open the disc tray, wait for the disc to stop before removing it.
Page 107: Powering Down The Computer
Avoid exposing discs to direct sunlight or extreme heat or cold. To clean a disc that is dirty, wipe it with a clean, dry cloth. The most efficient method to clean it is to start from the center of the disc and wipe toward the outward edge (not in a circle).
Page 108: Turn Off Or Shut Down Command
Learning the Basics Powering down the computer TECHNICAL NOTE: Before using any of these options to power down your computer, save your files and make sure the disk activity lights are off. If you change your mind and decide to continue working after all, wait a few seconds before turning the computer on again.
Page 109: Hibernation Command
Hibernation command The Hibernation command powers off the computer, but it first saves the current state of the computer to the hard disk. Since Hibernation does not require power to maintain the saved information, the system settings are retained indefinitely. Restoring information from the hard disk takes longer than restoring it from memory.
Page 110: Using Turn Off Or Shut Down
Learning the Basics Powering down the computer When starting up again, this choice uses less time and battery power than either Turn Off, Shut down or Hibernation. On restarting, the computer returns to the state in which you left it, and opens all the programs and files you were using.
Page 111 TOSHIBA Power Saver. Click Start, Control Panel. The Control Panel window appears. Click Performance and Maintenance. Double-click the Toshiba Power Saver icon. The TOSHIBA Power Saver Properties window appears. Learning the Basics Powering down the computer 113. ® network server (domain...
Page 112 Learning the Basics Powering down the computer Sample TOSHIBA Power Saver Properties window Click the Setup Action tab. Sample Setup Action window...
Page 113: Using Hibernation Mode
Click Apply. Click OK to close the TOSHIBA Power Saver Properties window, then close the Control Panel. Starting again after Turn Off or Shut down To start the computer up again, slide and release the power switch;...
Page 114 Learning the Basics Powering down the computer Sample Turn off computer window with Shift key held down to show Hibernate option The computer saves the state of the system, including all open programs and files, to the hard disk and then powers down completely.
Page 115 Click Start, Control Panel. The Control Panel window appears. Click Performance and Maintenance. Double-click the Toshiba Power Saver icon. The TOSHIBA Power Saver Properties window appears. Sample TOSHIBA Power Saver Properties window Click to select a profile. Click the Setup Action tab.
Page 116: Using Standby Mode
Click Apply. Click OK to close the TOSHIBA Power Saver Properties window, then close the Control Panel. Starting again from Hibernation Use these instructions to restart the computer when you enter standby mode by closing the display panel: AC power.
Page 117 Sample Turn off computer window with Stand By option Click Stand By. The computer saves the state of all open programs and files to memory, turns off the display, and goes into a low-power mode. The on/off light ( machine is in standby mode. If you are connected to a Windows server), power down the computer using the Standby command as follows:...
Page 118 Click Start, Control Panel. The Control Panel window appears. Click Performance and Maintenance. Double-click the Toshiba Power Saver icon. The TOSHIBA Power Saver Properties window appears. Sample TOSHIBA Power Saver Properties window Click to select a profile. “Standby Mode” on page...
Page 119 Set this option to Stand By so that the computer will go into standby mode when you close the display panel. Click Apply. Click OK to close the TOSHIBA Power Saver Properties window, then close the Control Panel. Learning the Basics Powering down the computer...
Page 120: Toshiba's Online Resources
The computer returns to the screen you were previously using. Toshiba’s online resources Toshiba maintains a number of online sites to which you can connect. These sites provide information about Toshiba products, give help with technical questions, and keep you up to date with future upgrades.
Page 121: Chapter 3: Mobile Computing
Many of these energy-saving features have been set by Toshiba. We recommend that you leave these features active, allowing your computer to operate at its maximum energy efficiency, so that you can use it for longer periods while...
Page 122: Running The Computer On Battery Power
This is normal for all batteries. To purchase a new battery pack see the accessories information that shipped with your computer, or visit the Toshiba Web site at accessories.toshiba.com. current on the most recent software and hardware options for your computer, and for other product information.
Page 123: Using Additional Batteries
Doing so may reduce the potential charge of the battery. Use only battery chargers designed to work with your notebook computer. You can order a Toshiba battery charger from Toshiba’s Web site at accessories.toshiba.com. Mobile Computing...
Page 124: Charging The Main Battery
Mobile Computing Charging the batteries Charging the main battery To charge the main battery while it is in your computer, plug the computer into a live electrical outlet. The battery charges whether the computer is on or off. TECHNICAL NOTE: When your computer is using all of the power provided by the AC Adapter to run applications, features, and devices, the recharging of the battery cannot occur.
Page 125: Charging The Rtc Battery
Charging the RTC battery Your computer has an internal real-time clock (RTC) battery. The RTC battery powers the System Time Clock and BIOS memory used to store your computer’s configuration settings. When fully charged, it maintains this information for up to a month when the computer is powered off.
Page 126: Monitoring Battery Power
Mobile Computing Monitoring battery power The computer can be used while the RTC battery is being charged, although the charging status of the RTC battery cannot be monitored. Monitoring battery power The computer’s battery light gives you an indication of the battery’s current charge: Green means the battery is fully charged.
Page 127: Determining Remaining Battery Power
Click Start, then click Control Panel. Click Performance and Maintenance. Click the Toshiba Power Saver icon. The Power Saver Properties window appears. The current power source and battery power remaining section displays the current charge state of the battery.
Page 128: Conserving Battery Power
Where you are working—since operating time decreases at low temperatures. Toshiba’s power-saving options greatly increase the length of time you can use the computer before having to recharge the battery. Toshiba has combined these options into several preset power usage modes.
Page 129: Setting A Power Usage Mode
Setting a power usage mode Toshiba recommends that you use the Toshiba Power NOTE Management Utility for changing system power settings. Click Start, Control Panel. The Control Panel window appears. Click Performance and Maintenance. Click the Toshiba Power Saver icon.
Page 130: Using Battery Alarms
To set an alarm or alarms: Click Start, Control Panel. Click Performance and Maintenance. Click the Toshiba Power Saver icon. The TOSHIBA Power Saver Properties window appears. Click the Setup Action tab and set the alarm(s), as desired. simultaneously to display the power usage key.
Page 131: Turning Off The Display Automatically
Turning off the display automatically To save power, it is a good idea to set the display to turn off automatically when you are not using the computer. You can do this by using the Power Saver Properties to turn off the LCD panel after a certain amount of time has passed.
Page 132: Changing The Battery
Mobile Computing Changing the battery Click the up and down buttons to set the number of minutes of inactivity that activates the screen saver. For example, if you want the screen saver to activate after 10 minutes of inactivity, select 10 minutes in the Wait box. Click OK if you do not want to adjust the time before the monitor (LCD display) is turned off.
Page 133 Turn the computer over. Before you turn the computer over, make sure that the computer display is properly closed and is not in tablet mode. Setting the computer down on the display may cause damage to the screen. Slide the battery lock away from you. Sample unlocking the battery Slide the release latch to the left.
Page 134: Inserting A Charged Battery
Mobile Computing Changing the battery Insert a fingertip in the battery pack recessed area and lift the battery pack, which will pop up. Pull the discharged battery module out of the computer. Removing the discharged battery If the battery is leaking or its case is cracked, put on protective gloves to handle it, and discard it immediately.
Page 135: Taking Care Of Your Battery
The battery has been designed so that you cannot install it with reverse polarity. If the battery does not slide into the slot easily, remove the battery and try again. Do not force the battery into position. Lock the battery into place using the battery lock. Turn the computer right side up.
Page 136: Battery Safety Precautions
Dispose of the battery as required by local ordinances or regulations. Use only batteries recommended by Toshiba. If the battery pack produces an odor, overheats, or changes color or shape while it is being used or charged, turn off the computer’s power immediately and...
Page 137: Disposing Of Used Batteries Safely
If a battery is leaking or damaged, replace it immediately. Use protective gloves when handling a damaged battery. To replace the main battery, use an identical battery that you can purchase through the Toshiba Web site at accessories.toshiba.com. A reverse polarity condition should be avoided with all batteries.
Page 138 Please be kind to our shared environment. Check with your local government authority for details regarding where to recycle old batteries or how to dispose of them properly. If you cannot find the information you need elsewhere, call Toshiba at: (800) 457-7777.
Page 139: Traveling Tips
Always travel with the computer in a carrying case. Toshiba offers a choice of carrying cases for the computer. They all provide plenty of extra space for manuals, power cords/cables, diskettes, etc. See your dealer for more information.
Page 140: Chapter 4: Exploring Your Computer's Features
Chapter 4 Exploring Your Computer’s Features In this chapter, you will explore other features of your notebook computer. ® Windows XP special features The Windows you several new features and enhancements, including: New system file protection A system restore function which allows you to rollback the system to its previous mode An improved help center, support automation, and automatic Windows...
Page 141: Personalizing Your Desktop
Personalizing your desktop Your desktop is your virtual workspace. This section explains how to customize its features for the way you like to work. You can customize the following aspects of the desktop: Taskbar—which resources to display for quick access Web content interface—what information from the Internet to display Desktop style—how windows are displayed and how to...
Page 142: Bringing The World To Your Desktop
Exploring Your Computer’s Features Personalizing your desktop To customize your taskbar settings, point to an empty space in the taskbar and click the secondary button then click Properties. Bringing the world to your desktop With the Windows system you can set up your desktop with complete World Wide Web integration at a single click.
Page 143: Changing Desktop And Browsing Style
Click the Web tab. The operating system displays a list of items to add to the desktop. To view additional components, click New. The New Desktop Item dialog box appears. To browse the Gallery for more components to add, click Visit Gallery.
Page 144 Exploring Your Computer’s Features Personalizing your desktop Choosing a style To select desktop and browsing style options: Click Start, then click My Computer. The My Computer window appears. Select the Tools menu, then click Folder Options. The Folder Options dialog box appears. Sample Folder Options dialog box Click the preferred options.
Page 145: Personalizing Individual Windows
Personalizing individual windows Just as you can display a Web page on your desktop, you can also display a Web page in an individual window. If you subscribe to the Web page, it can be automatically updated on a regular basis. For example, using this Web integration feature you can monitor weather, game scores, stock prices, or headlines—all in the window of your choice.
Page 146: Displaying Information About Each Folder
Exploring Your Computer’s Features Personalizing your desktop The elements you can add to the top of the window are: Toolbar element Address Bar Standard buttons Displaying a toolbar in a window Click Start, then click My Computer. The My Computer window appears. On the View menu, point to Toolbars, then click the name of the toolbar you want to display.
Page 147: Setting Up For Communications
In the Tools menu, select Folder Options. In the Tasks section, click the button for Show common tasks in folders. Click Apply, then OK. Sample Control Panel window as a Web page The addition of the name of the folder and instructions for how to use the folder on the left give the window the appearance of a Web page.
Page 148: Determining The Com Port
Exploring Your Computer’s Features Setting up for communications A browser or communications program An Internet Service Provider (ISP) or online service if you plan to use the Internet There are many other ways to connect to the Internet in NOTE addition to those discussed in this section.
Page 149: Connecting The Modem To A Telephone Line
Modem options box. Close the Control Panel. For more information regarding your system's V.92 modem, visit the Toshiba web site at pcsupport.toshiba.com. Connecting the modem to a telephone line Before you can communicate using the modem, you need to connect it to a telephone line. Your computer’s built-in modem provides an RJ11 jack which allows you to connect the modem to a standard voice-grade telephone line.
Page 150: Connecting Your Computer To A Network
Exploring Your Computer’s Features Setting up for communications Sample connecting to a wall jack The modem is designed for use with a standard analog telephone line. Never connect the modem to a digital telephone line. A digital line will damage the modem. Now you are ready to send a fax or use the modem to connect to an online service or the Internet.
Page 151: Using The Ethernet Lan Port
Using the Ethernet LAN Port If your operating system is Windows you can connect your computer to a Local Area Network (LAN) at work or from a remote location. When your computer starts, the Windows attempts to contact a Dynamic Host Configuration Protocol (DHCP) server.
Page 152: Accessing The Wireless Modules Using Your System Tray
Your Wi-Fi Mini PCI and Bluetooth modules are integrated into your computer system. It is recommended that you do not remove the modules from your computer. For assistance, contact a Toshiba Authorized Service Provider. Using Bluetooth The following information applies to those systems with the...
Page 153: An Overview Of Using The Internet
Bluetooth is now enabled. Your Bluetooth module is based on the Bluetooth specification NOTE version 1.1. Toshiba cannot confirm compatibility with all computer products and/or electronic devices using Bluetooth other than Toshiba mobile computers. An overview of using the Internet...
Page 154: The Internet
Exploring Your Computer’s Features An overview of using the Internet The Internet The Internet is an association of thousands of networks and millions of computers around the world connected by communications lines. They all work together to share information. The World Wide Web The World Wide Web (or ‘Web’) is a subset of the Internet —...
Page 155: Surfing The Internet
The Microsoft automatically configured on your system so that when you first start it, it guides you through signing up for a new ISP account or assists you in setting up your computer to work with your existing ISP. Once you have established an ISP account, you can connect to the Internet.
Page 156: Internet Features
Exploring Your Computer’s Features An overview of using the Internet Internet features The Internet offers many types of communication tools to help you perform many tasks. Internet email To send and receive email of your own, you need a mailbox on the Web, or an email address. If you have an account with an ISP, you can probably set up an email address at the same time as you sign up for the service.
Page 157: Exploring Audio Features
The computer plays sounds through the internal speakers. It uses the sound settings in your operating system, except for the system speaker, which is configured by the Toshiba System utility. To adjust the volume, click the speaker icon in the taskbar.
Page 158: Recording Sounds
Exploring Your Computer’s Features Exploring audio features To adjust the volume: For external speakers, use the volume control on the speakers in conjunction with the volume control on the computer. For headphones, use the computer’s volume control dial. Recording sounds An external microphone may be used with other software to record monaural audio sounds and save them as digital audio .WAV files on disk.
Page 159: Using Tablet Mode
Click the Record button and speak normally into the microphone. You can only record 60 seconds at a time. NOTE When you have finished recording, click the Stop button. To hear what you just recorded, click the Play button. To save the file, select Save from the File menu. The microphone on your computer might be set to Mute.
Page 160: Preparing To Use The Tablet
Exploring Your Computer’s Features Using tablet mode Preparing to use the tablet Press the display panel release button and lift the display panel. Slide the power switch to the right and hold it until the on/off light on the system indicator panel glows green— about one second.
Page 161 Menu button (the Cross-Functional button) and select the supported display option. You should view video on an external monitor in primary NOTE landscape mode. Any other orientation will display the external video resolution incorrectly. Exploring Your Computer’s Features Using tablet mode 190. Display Latch “The Toshiba Rotation...
Page 162: Using The Toshiba Tablet Pen
Use the Toshiba tablet pen on the tablet as you would any pointing device or pen. 132. Once the battery is removed, locate the...
Page 163 NOTE original configuration, with the screen open and facing the keyboard. Use the Toshiba tablet pen as you would a mouse or other pointing device. For example, you can execute “mouse type” commands in the same manner you normally would: To move the pointing icon (or cursor) on the tablet, lightly drag the Toshiba tablet pen across the tablet.
Page 164: Returning The Computer To Its Original Configuration
When you are finished using the tablet, follow the steps below to return the computer to its original configuration: Return the Toshiba tablet pen to its slot on the right side of the computer. Press the display latch release button.
Page 165: Using Pc Cards
Using PC Cards Your computer comes with one PC Card slot and supports two types of PC Cards: Type I Cards—You can install one of these cards. Type II Cards—You can install one of these cards. TECHNICAL NOTE: For PCMCIA-compatible PC Cards, check the package to make sure they conform to the PCMCIA 2.1 standard (or later).
Page 166: Removing A Pc Card
Exploring Your Computer’s Features Using PC Cards Sample inserting a PC Card When the card is almost all the way into the slot, push firmly but gently to ensure a firm connection with the computer. Avoid forcing the card into position. Removing a PC Card Stop the PC Card by clicking the Safely Remove Hardware icon on the System tray.
Page 167: Using An Optional Sd ® Card
For example: Never remove a hard disk card or CD-ROM drive card while the system is accessing the card. Never remove a network card while you are connected to the network. Never remove a SCSI card while any of the SCSI devices connected to it are operating.
Page 168: Installing Sd Card Drivers
Formatting an optional SD card To format an SD card, use the Toshiba SD Memory Card Format utility. Click on Start, All Programs, Toshiba, Utilities, and then click on SD Memory Card Format.
Page 169: Using Standby Or Hibernate While Using The Sd Card
Stopping or removing the SD card after formatting If you have formatted the SD card drive with the Windows operating system format (see Formatting an SD Card in the preceding section), you may be unable to stop or eject your card.
Page 170: Using Slim Selectbay Modules
DVD SuperMulti drive. HINT: Items from this list that did not come with your computer can be purchased separately. See the accessories information packaged with your system or visit Toshiba’s Web site at accessories.toshiba.com Removing a module from the Slim SelectBay Use caution when lifting or turning your computer.
Page 171: Inserting A Module Into The Slim Selectbay
Slide the Slim SelectBay latch toward the back of the computer. While holding the latch, slide the module out of the computer. Inserting a module into the Slim SelectBay To install a module into the Slim SelectBay, slide the module all the way into the Slim SelectBay.
Page 172: Chapter 5: Toshiba Utilities
Fn-esse Hotkey Utility TOSHIBA Assist Computer Diagnostic Tool The Toshiba Rotation Utility Cross Menu Utility TOSHIBA Tablet Access Code Utility Power Management TOSHIBA Hardware Setup TOSHIBA Zooming Utility TOSHIBA SD Memory Boot Utility...
Page 173: Fn-Esse
Fn-esse The operating system shortcuts and Toshiba’s Fn-esse program provide quick ways to open programs, documents, and folders from within any program without using the Start menu. This section describes how to use the Fn-esse program to quickly access your programs and files.
Page 174: Assigning A Key To A Program Or Document
Toshiba Utilities Fn-esse Sample Fn-esse keyboard The keys are color-coded as follows: Available keys are white. Assigned keys and keys associated with a popup list are shown on the Fn-esse keyboard in the selected color. Unavailable keys are not shown.
Page 175 Using the pointing device, move the cursor over the desired key and press the secondary button. The Assignment Type dialog box appears. Follow the instructions in the assignment” on page 176 on page 176. Toshiba Utilities Fn-esse “Making a direct key “Making a popup assignment” key, then...
Page 176 Toshiba Utilities Fn-esse Making a direct key assignment To make a direct key assignment, select Direct to display the Add/Edit Command dialog box, then complete these steps: Enter the Description, Command Line, and Working Directory for the new Fn-esse key assignment, or click the Browse button to specify this information.
Page 177: Viewing Existing Key Assignments
The Hotkey utility allows you to receive a confirmation message when you use the hot key combination for Stand By [Fn+F3] and Hibernation [Fn+F4]. To activate the utility: Click Start, All Programs, Toshiba, Utilities, then click Hotkey utility. The Hotkey window appears. Toshiba Utilities...
Page 178: Toshiba Assist
Sample Toshiba Hotkey utility window Put a check mark next to the desired option. Click OK. TOSHIBA Assist The TOSHIBA Assist provides quick access to computer functions and allows you to customize a range of computer settings. To access this utility: Click Start, All Programs, Toshiba, Utilities, then click Assist.
Page 179 Sample TOSHIBA Assist window The TOSHIBA Assist offers four categories of options: CONNECT SECURE PROTECT & FIX OPTIMIZE Toshiba Utilities TOSHIBA Assist...
Page 180: Connect
The options in this category are: Supervisor password (see Windows ® operating system” on page User password (see operating system” on page Sample TOSHIBA Assist window, SECURE tab “Using ConfigFree™ with your Toshiba 269) “Using passwords in the “Using passwords in the Windows ®...
Page 181: Protect & Fix
The PROTECT & FIX tab displays icons for the following utilities: Computer Diagnostic Tool HDD Protection Sample TOSHIBA Assist window, PROTECT & FIX tab OPTIMIZE The OPTIMIZE tab displays icons for the following utilities: Power Management TOSHIBA SD Memory Boot Utility...
Page 182 Toshiba Utilities TOSHIBA Assist TOSHIBA Zooming Utility TOSHIBA Button Controls CD/DVD Drive Acoustic Silencer Hotkey Utility TOSHIBA Hardware Setup Tablet and Pen Settings The Toshiba Rotation Utility Sample TOSHIBA Assist window, OPTIMIZE tab...
Page 183: Computer Diagnostic Tool
This utility can help diagnose problems with devices in your computer. Refer to the online help documentation within the application for any additional help. To start this utility: Click Start, All Programs, Toshiba, Utilities, and click Computer Diagnostics. The Diagnostic Tool window appears. Sample Computer Diagnostic Tool screen Select the devices that you would like to test by clicking the check box that appears to the left of the device.
Page 184: Hdd Protection
HDD Protection is enabled, the HDD head is moved to a safe position to protect the HDD from damage. To access this utility: In the Toshiba Assist window, select the PROTECT & FIX tab, then click the HDD Protection icon. The TOSHIBA HDD Protection Properties window appears.
Page 185: Power Management
The Power Management feature enables you to control your computer’s power usage, regardless of the source. You can use the many preset power modes or create one yourself. To access this utility through the TOSHIBA Assist, select the PROTECT & FIX tab and click the Power Management icon.
Page 186: Power Usage Profiles
You can either use one of the preset profiles or create and use your own customized mode. The preset profiles cannot be deleted. By changing the options that appear in the Toshiba Power Saver Properties window and clicking OK you can reconfigure that function. Any options that you change become effective when you click either OK or Apply.
Page 187: Customizing A Power Mode
Click OK. Mouse Utility The Mouse utility allows you to change your TouchPad or mouse settings. To access the Mouse utility through the TOSHIBA Assist, select the OPTIMIZE tab and click the Mouse icon. Sample of Mouse Properties Toshiba Utilities...
Page 188: Toshiba Hardware Setup
Assist, is the Toshiba configuration management tool. For more information about TOSHIBA Assist see Assist” on page To access this utility through the TOSHIBA Assist, select the OPTIMIZE tab and click the Toshiba Hardware Settings i.con. Sample TOSHIBA HWSetup window...
Page 189 Select the boot device by pressing the right or left arrow keys, then pressing the Since the system is a quick-booting system, you must press NOTE the arrow keys immediately after sliding the power switch. Toshiba Utilities TOSHIBA Hardware Setup key. Enter...
Page 190: The Toshiba Rotation Utility
This utility allows you to change the default setting of the display format (primary portrait) to three other display formats: Primary landscape Secondary portrait Secondary landscape To access this utility: Select the OPTIMIZE tab in the TOSHIBA Assist and click the Rotation Utility i.con. The Rotation Utility screen appears.
Page 191 Select a new display format for either PC mode or Tablet PC mode. Click OK. Toshiba recommends that you use the Toshiba Rotation Utility NOTE to change screen rotation options and settings for the tablet feature Tablet and Pen Settings.
Page 192: Tablet And Pen Settings
The Tablet and Pen Settings window allows you to set various options for using the tablet and pen. To access this utility: Select the OPTIMIZE tab in the TOSHIBA Assist and click the Tablet and Pen Settings icon. The Tablet and Pen Settings screen appears.
Page 193: Cross Menu Utility
Click OK. Cross Menu Utility The Cross Menu Utility allows you to make Hot Key assignments to launch applications, access Toshiba utilities, or create your own custom menus. To start the Cross Menu Utility: Press and hold the Cross-Functional button for two seconds until the following screen displays.
Page 194: Creating A New Menu
Cross-Functional button. Creating a New Menu You can add up to five menus. NOTE To create a new menu: Click Start, All Programs, Toshiba, Tablet PC, and then Cross Menu. The Cross Menu Setting window appears.
Page 195: Toshiba Tablet Access Code Utility
Open. When you have finished adding applications to the menu, click OK. TOSHIBA Tablet Access Code Utility This utility allows you to create and register an access code controlling who can log onto Windows. When creating and registering an access code, you can choose NOTE any character or symbol you want.
Page 196: Toshiba Zooming Utility
Toshiba Utilities TOSHIBA Zooming Utility To access the utility: Click Start, All Programs, Toshiba, Tablet PC, and then Tablet Access Code Logon Utility. The Tablet Access Code Logon Utility screen appears. Sample TOSHIBA Tablet Access Code Logon Utility screen To create an access code, click New Registration.
Page 197 TOSHIBA Assist window and click the Zooming Utility icon. The TOSHIBA Zooming Utility Properties screen appears. Sample TOSHIBA Zooming Utility screen For more information about how to use the TOSHIBA Zooming Utility, right click on the icon in the taskbar and click on Help.
Page 198: Toshiba Button Controls
To access this utility: Select the OPTIMIZE tab in TOSHIBA Assist and click the TOSHIBA Button Controls icon. The TOSHIBA Controls Properties window appears. Sample TOSHIBA Controls Properties window Click the selected button.
Page 199: Cd/Dvd Drive Acoustic Silencer
CD/DVD Drive Acoustic Silencer Sample CD/DVD Drive Acoustic Silencer screen This utility, available on Toshiba Assist, can slow the speed of your optical drive to make it run more quietly. You can use this utility to make listening to Music CDs more enjoyable.
Page 200: Toshiba Accessibility
TOSHIBA Accessibility The Toshiba Accessibility window The TOSHIBA Accessibility utility allows you to use the key to create a hot key combination with one of the function keys without pressing the two keys simultaneously as is usually required. Using Accessibility lets you make the a sticky key, meaning you can press it once, release it, and then press a function key to activate the hot key function.
Page 201: Toshiba Mobile Extension
Toshiba Mobile Extension To adjust the settings for the optional Advance Port Replicator III, use the TOSHIBA Mobile Extension utility. To use the TOSHIBA Mobile Extension utility: Click Start, then Control Panel, then Performance and Maintenance. Click TOSHIBA Mobile Extension.
Page 202: Toshiba Sd Memory Boot Utility
TOSHIBA SD Memory Boot Utility Sample Display Change Service tab options TOSHIBA SD Memory Boot Utility The TOSHIBA SD Memory Boot Utility allows you to create an SD card you can use to boot up your computer. To create a bootable SD card: Attach a USB floppy drive to your computer and insert a bootable floppy disk.
Page 203: Booting From A Bootable Sd Card
Click Start, All Programs, Toshiba, Utilities, and then SD Memory Boot Utility. The TOSHIBA SD Memory Boot Utility screen appears. Sample TOSHIBA SD Memory Boot Utility screen Select the drive where the SD is located. Select the Read from a floppy disk option.
Page 204 Toshiba Utilities TOSHIBA SD Memory Boot Utility During the boot process, press the displays the Boot menu. Use the arrow keys to select the SD/Floppy icon. Press the key. Enter key. The system...
Page 205: Chapter 6: Keeping Your Files Safe
Trusted Platform Module (TPM) This section only applies to systems with TPM. NOTE Your Toshiba computer includes the TPM (Trusted Platform Module) which is a security encryption device for your system's hard disk drive. TPM is already included on your system, but needs to be installed and enabled using the following procedures.
Page 206 Keeping Your Files Safe Trusted Platform Module (TPM) To install TPM: Launch the Toshiba Application Installer from the desktop and install the following packages: Infineon Trusted Platform Module Utility Infineon TPM (Trusted Platform Module) Installation Guide Follow the directions on your screen.
Page 207: Using Passwords In The Windows Operating System
HARD DISK AGAIN unless you have set a hard disk drive mas- ter password and you remember that password. Toshiba is not responsible for any losses that may occur to you, your organization or others as a result of the inability to access the hard drive.
Page 208: User-Level Passwords
Make sure you use a password you can remember easily. If you forget the User and Supervisor passwords, you will not be able to use the computer. Contact a TOSHIBA Authorized Service Provider for assistance. Setting a user-level password...
Page 209: Disabling The User-Level Password
Open the User Password tab. Click Delete. A Delete User Password dialog box appears. Type in the password and click Delete. Click OK at the bottom of the Toshiba Password Utility window. The user password is disabled. Using the power-on (user-level) password...
Page 210: Using The Hdd Password
Keeping Your Files Safe Using passwords in the Windows® operating system If you have not registered a user-level password, press unlock your system. If you have registered a user-level password, press your password and press correctly, the computer returns to where it was when you pressed the hot key.
Page 211: Setting A Hard Disk Drive User Only Password In System Setup
Using passwords in the Windows® operating system Setting a hard disk drive user only password in System Setup If you choose to set a hard disk drive user password, we strongly recommend that you set a hard disk drive master password as well.
Page 212: Deleting Or Changing A Hard Disk Drive User Only Password In System Setup
Keeping Your Files Safe Using passwords in the Windows® operating system When System Setup prompts you to verify the password, type it again and press If the two passwords match, System Setup displays: Registered message appears. Repeat steps 6 and 7 to enter the password again.
Page 213: Setting A Hard Disk Drive Master And User Password In System Setup
Using passwords in the Windows® operating system When System Setup prompts you to verify the password, type it again and press If the two passwords match, System Setup displays: Registered message appears. Repeat steps 5 and 6 to enter the password again.
Page 214 Keeping Your Files Safe Using passwords in the Windows® operating system Click Start, then click Shutdown, and click OK. The computer shuts down. Hold down the switch until the on/off light on the system indicator panel illuminates (green) for approximately one second. When the following message appears on the screen: “Check system, Then press [F1] key,”...
Page 215: Changing The Master And User Passwords In System Setup
Using passwords in the Windows® operating system Changing the master and user passwords in System Setup To change the master and user passwords in System Setup: Click Start, then click Shutdown, and click OK. The computer shuts down. Hold down the switch until the on/off light on the system indicator panel illuminates (green) for approximately one second.
Page 216 Keeping Your Files Safe Using passwords in the Windows® operating system Deleting the hard disk drive master and user passwords in the System Setup HINT: You must delete the hard disk drive master password before you can delete the hard disk drive user password. To delete the master and user passwords in System Setup: Click Start, then click Shutdown, and click OK.
Page 217: Chapter 7: If Something Goes Wrong
This chapter aims to help you solve many problems by yourself. It covers the problems you are most likely to encounter. If all else fails, contact Toshiba. You will find information on Toshiba’s support services at the end of this chapter. Problems that are easy to fix Your program stops responding.
Page 218 If Something Goes Wrong Problems that are easy to fix Click the Applications tab. If a program has stopped responding, the words “not responding” appear beside its name in the list. Select the program you want to close, then click End Task.
Page 219: Problems When You Turn On The Computer
To record the details: Click the Details button and select the text the operating system displays. The Details button displays information that the software manufacturer needs to help you solve your problem. Press Ctrl clipboard. Open Notepad (click Start, point to All Programs, then point to Accessories and click Notepad).
Page 220 If Something Goes Wrong Problems when you turn on the computer The computer starts but when you press a key nothing happens. Verify that the active program accepts text input. Try clicking your mouse on an area where you can type text, and try typing again.
Page 221: The Windows Operating System Is Not Working
The Windows® operating system is not working If you are running on battery power, it is recommended that you do not leave the computer in standby mode for long periods of time. To charge the battery, leave the computer plugged into a live wall outlet for several hours.
Page 222: Using Startup Options To Fix Problems
If Something Goes Wrong The Windows® operating system is not working Using Startup options to fix problems If the operating system fails to start properly, you may have to change your system’s configuration or verify the startup procedure to fix the problem. To do this, use the options in the Startup menu.
Page 223: Internet Problems
The Windows® operating system is not working Internet problems My Internet connection is very slow. Many factors contribute to the speed with which you can surf the Internet. They include: modem speed, telephone line conditions, time of day (when everyone else is surfing, your access can be slow) and popularity of the sites you are trying to access.
Page 224: Resolving A Hardware Conflict
The device most recently connected to the system is the one most likely to be causing a hardware conflict. pcsupport.toshiba.com Help and Support to troubleshoot the problem...
Page 225: Resolving Hardware Conflicts On Your Own
If Something Goes Wrong Resolving a hardware conflict Resolving hardware conflicts on your own Computer components need resources to accomplish a task. A device, such as a disk drive or a modem, needs a channel to the computer’s Central Processing Unit (CPU). It also needs a direct channel to the computer’s memory to store information as it works.
Page 226: Fixing A Problem With Device Manager
If Something Goes Wrong Resolving a hardware conflict If you install an older (legacy) device that the operating system cannot recognize, the operating system may have difficulty assigning resources to it. As a result, a hardware conflict can occur. Resolving conflicts There are several things you can do to resolve hardware conflicts: Get the most recent drivers from the manufacturer.
Page 227 Disabling a device Open the Start menu, and click Control Panel. Click the Administrative Tools icon. Double-click Computer Management, then click Device Manager. Select the specific device from the device category. To expand a device category, double-click the category. In the toolbar, look to the far right for an icon of a monitor with a strike mark through a circle on the front.
Page 228: Memory Problems
If Something Goes Wrong Resolving a hardware conflict The General tab, which provides basic information about the device. The Resource tab, which lists resources assigned to the monitor, optional external DVD-ROM, optional external diskette drive, and other power-using functions. This tab does not appear if the device is not using resources.
Page 229: Power And The Batteries
Check for the error again. If the error recurs, remove the memory module entirely and check for the error again. If removing the memory module eliminates the error, the memory module may be faulty. If the error recurs without the memory module installed, the error is not caused by the memory module.
Page 230 This is normal for all batteries. To purchase a new battery pack, see your accessories information that shipped with your computer, or visit the Toshiba Web site at accessories.toshiba.com. Refer to this site often to stay...
Page 231: Keyboard Problems
current on the most recent software and hardware options for your computer, and for other product information. For more information on maximizing battery power see “Charging the batteries” on page Keyboard problems If, when you type, strange things happen or nothing happens, the problem may be related to the keyboard itself.
Page 232: Display Problems
If Something Goes Wrong Resolving a hardware conflict Display problems Here are some typical display problems and their solutions: The screen is blank. Display Auto Off may have gone into effect. Press any key to activate the screen. You may have activated the instant password feature by pressing password, press any key, type the password and press no password is registered, press any key.
Page 233 The screen does not look right. You can change the display settings by clicking a blank area of the desktop with the secondary control button, then clicking Properties. This opens the Display Properties dialog box. The Appearance tab of this dialog box allows you to choose the colors for the screen.
Page 234: Disk Drive Problems
If Something Goes Wrong Resolving a hardware conflict The display mode is set to Simultaneous and the external display device does not work. Make sure the external monitor is capable of displaying at resolutions of 800 x 600 or higher. Devices that do not support this resolution will only work in Internal/External mode, and not simultaneous mode.
Page 235 Error-checking Run Error-checking, which analyzes the directories, files and File Allocation Table (FAT) on the disk and repairs any damage it finds: To run Error-checking: Click Start, then click My Computer. Right-click the drive you want to check. The drive’s Properties box appears. This feature is not available for CD/DVD drives.
Page 236 If Something Goes Wrong Resolving a hardware conflict Your data files are damaged or corrupted. Refer to your software documentation for file recovery procedures. Many software packages automatically create backup files. You may also be able to recover lost data using utility software.
Page 237: Dvd-Rom Or Multi-Function Drive Problems
DVD-ROM or multi-function drive problems You cannot access a disc in the drive. Make sure the tray which holds the CD-ROM or DVD-ROM is closed properly. Press gently until it clicks into place. Open the tray and remove the disc. Make sure the tray is clean.
Page 238: Sound System Problems
If Something Goes Wrong Resolving a hardware conflict Some discs run correctly but others do not. Check the type of disc you are using. The DVD-ROM drive supports the Digital Versatile Disc (DVD) formats DVD- ROM, DVD-R (read-only), plus CD-ROM, CD-R (read- only), and CD-RW (read-only).
Page 239 these devices to work together, several sections in this chapter may apply. Resource conflicts can cause problems when using PC Cards. “Resolving a hardware conflict” on page Card Information Structure When you insert a PC Card into a slot, the computer attempts to determine the type of card and the resources it requires by reading its Card Information Structure (CIS).
Page 240 If Something Goes Wrong Resolving a hardware conflict Resolving PC Card problems Here are some common problems and their solutions: The slot appears to be dead. PC Cards that used to work no longer work. Check the PC Card status: Click Start.
Page 241 Hot swapping (removing one PC Card and inserting another without turning the computer off) fails. Follow this procedure before you remove a PC Card: Double-click the PC Card icon on the taskbar. Click Safely remove xxxx, where xxxx is the identifier for your PC Card.
Page 242: Printer Problems
If Something Goes Wrong Resolving a hardware conflict Printer problems This section lists some of the most common printer problems: The printer will not print. Check that the printer is connected to a working power outlet, turned on and ready (on line). Check that the printer has plenty of paper.
Page 243: Modem Problems
The other system may be busy or off line. Try making a test transmission to someone else. For more information regarding your system's V.92 modem, visit the Toshiba web site at If Something Goes Wrong Resolving a hardware conflict 148.
Page 244: Wireless Device Problems
To determine if your computer has an internal Wi-Fi adapter, NOTE check the device list in Device Manager (part of the Windows Control Panel). Some Toshiba models may have a Wi-Fi antenna switch even though they do not have an internal Wi-Fi adapter.
Page 245 Resolving a hardware conflict Check Control Panel's Device Manager to verify that the Wi-Fi adapter is recognized by Windows driver is loaded. Carefully note any error messages— these will be very helpful if you should confer with a support technician at a later time. Verify that the network connection is configured to obtain its Internet Protocol (IP) address dynamically: 1 Click Start, Control Panel.
Page 246 If Something Goes Wrong Resolving a hardware conflict Use the PING command to verify a connection to the gateway at 192.168.1.1 (a default gateway for most wireless routers). Click Start, then click Run... Enter Cmd and press Enter. Enter PING 192.168.1.1 at the command prompt, and press Enter.
Page 247: Dvd Operating Problems
Windows XP will now try to establish a wireless connection. The Windows XP wireless management facility does not work. If you are using an external Wi-Fi adapter (a PC Card, USB adapter, or other variety), check if the adapter comes with its own management utility.
Page 248 “Checking device properties” on page 227 instructions on using Device Manager to view the DVD- ROM properties. Check the Toshiba Web site for new information on DVD-ROM drives and their operation. A blank screen appears while watching a DVD-ROM movie or title.
Page 249 DVD titles, games, or applications appear distorted. Having Stretch enabled when your video resolution is set to 640 x 480 or 800 x 600 can cause distortion. To disable Stretch, follow the instructions below: Right-click the Desktop, select Properties. Select the Settings tab. Select the Advanced Flat Panel tab.
Page 250: Develop Good Computing Habits
If Something Goes Wrong Develop good computing habits Develop good computing habits Make sure you are prepared. Save your work frequently. You can never predict when your computer will lock, forcing you to close a program and lose unsaved changes. Many software programs build in an automatic backup, but you should not rely solely on this feature.
Page 251: Data And System Configuration Backup In Windows Xp
Your local computer store or book store sells a variety of self- help books you can use to supplement the information in the manuals. Data and system configuration backup in Windows XP Windows XP offers some easy-to-use features for backing up your Windows settings and your data –...
Page 252 If Something Goes Wrong Develop good computing habits Windows creates the Restore Point and automatically stamps it with the current date and time. Then, at a later time, you can re-establish your Windows configuration using the saved Restore Point. To do this: Click Start.
Page 253 CDs, a relatively high-capacity storage media. No additional software is required. Most of the CD and DVD drives built into recent Toshiba portable computer models can write to (or ‘burn’) as well as read from CDs.
Page 254 If Something Goes Wrong Develop good computing habits NOTE Documents and other data files that you create as you work are typically stored in the My Documents folder. You may also wish to back up other important data files stored elsewhere on your hard disk drive, for example: When you have finished copying files to the CD window, click File, Write these files to CD.
Page 255 Favorites (bookmarks) for Internet Explorer and other Web browsers Follow these steps to back up your Favorites for Internet Explorer (ver 5.0 or newer): In Internet Explorer, click File, Import and Export. The Import/Export Wizard will appear. Click Next. Click Export Favorites, Next. (To restore the Favorites to the hard disk drive later you would select Import Favorites from this list.) A list of your Favorites folders will appear, with the top-...
Page 256 If Something Goes Wrong Develop good computing habits General tips for installing hardware and software Here are a few tips to help insure safe and easy installation of new hardware (printers, pointing devices, external hard drives, DVD writers, scanners, etc.) and software (applications like Microsoft Office and Adobe Photoshop, or utility software such as special toolbars for your web browser).
Page 257: If You Need Further Assistance
Since some problems may be related to the operating system or the program you are using, it is important to investigate other sources of assistance first. Try the following before you contact Toshiba: Review the troubleshooting information in your operating system documentation.
Page 258: Contacting Toshiba
GO, and then clicking the Detailed Specs link from the menu on the left, or just refer to the computer documentation shipped with your product. For the number of a Toshiba dealer near you in the United States, call: (800) 457-7777. Contacting Toshiba...
Page 259: Other Toshiba Internet Web Sites
Exact error messages and when they occurred For technical support, call the Toshiba Global Support Centre: Within the United States at (800) 457-7777 Outside the United States at (949) 859-4273 Other Toshiba Internet Web sites toshiba.com computers.toshiba.com accessories.toshiba.com www.toshiba.ca www.toshiba-Europe.com www.toshiba.co.jp/index.htm...
Page 260 Henares Spain United States Toshiba America Information Systems, Inc. 9740 Irvine Boulevard Irvine, California 92618 United States For more information on additional Toshiba worldwide locations, please visit: www.toshiba.co.jp/index.htm. Japan Toshiba Corporation, PCO-IO 1-1, Shibaura 1-Chome Minato-Ku, Tokyo, 105-8001 Japan Mexico Toshiba de México S.A.
Page 261: Appendix A: Hot Keys
Appendix A Hot Keys Hot keys are keys that, when pressed in combination with the key, turn system functions on and off. Hot keys have a legend on the key indicating the option or feature the key controls. Volume Mute This hot key enables/disables volume mute on your computer.
Page 262: With A Password
Power usage mode This hot key displays the power usage pop-up win- dow and cycles through the battery save modes. Sample power usage modes The properties of each mode are set in the Toshiba Power Management utility. For more information Enter Enter “Power Management”...
Page 263: Standby Mode
Standby Mode This hot key puts the computer into standby mode. Sample Stand By confirmation box A message box is displayed, by default, to confirm that the computer is going into standby mode. You can choose not to display this message box. For more information about standby mode, please see “Using Standby mode”...
Page 264: Hibernation Mode
Hot Keys Hibernation mode Hibernation mode This hot key puts the computer into hibernation mode. Sample Hibernation confirmation box If hibernation mode is enabled (the default) a message box is displayed by default to confirm the computer is going into hibernation mode.
Page 265: Display Modes
Display modes This hot key cycles through the power-on display options. The display modes are: Sample display options window Display brightness This hot key decreases the screen brightness. This hot key increases the screen brightness. Built-in display panel only Built-in display panel and external monitor simultaneously External monitor only TV/LCD...
Page 266: Wireless Device Enable/Disable
Hot Keys Wireless device enable/disable Wireless device enable/disable This hot key enables and disables the optional wireless devices installed in your computer. The wireless modes are: Disabling or enabling the TouchPad This hot key disables or enables the TouchPad. To use the TouchPad see on page Sample disable and enable TouchPad window All disabled—This disables both the...
Page 267: Zooming Applications In/Out
This hot key turns the scroll lock feature on and off. This hot key toggles the resolution between SVGA (800 x 600), XGA (1024 x 768), and SXGA+ (1400 (spacebar) x 1050). Zooming Applications In/Out “TOSHIBA Zooming Utility” 196. “TOSHIBA Zooming 196. Hot Keys...
Page 268: Appendix B: Power Cord/Cable Connectors
Appendix B Power Cord/Cable Connectors Your notebook computer features a universal power supply you can use worldwide. This appendix shows the shapes of the typical AC power cord/cable connectors for various parts of the world. USA and Canada UL approved CSA approved Australia AS approved...
Page 269: Appendix C: Using Configfree™ With Your Toshiba Computer
Appendix C Using ConfigFree™ with your Toshiba Computer ConfigFree™ is a set of utilities that makes it easy to control communication devices and network connections. ConfigFree also lets you identify communication problems and create profiles for easy switching between locations and communication networks.
Page 270: Getting Started
Using ConfigFree™ with your Toshiba Computer Getting Started Profile Settings—The Profiles utility lets you switch between network configurations. For more information “Profile Settings” on page ConfigFree SUMMIT—The ConfigFree SUMMIT utility is used to connect with other ConfigFree users for file sharing.
Page 271 Using ConfigFree™ with your Toshiba Computer Press the TOSHIBA Assist button (if applicable to your system) to open the TOSHIBA Assist, and then click the ConfigFree icon. Click the ConfigFree icon click the desired utility. If your computer is not connected to a network, the ConfigFree NOTE icon on the taskbar is displayed with an “X.”...
Page 272: Configfree Utilities
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample ConfigFree Launcher Auto-hide mode setting Sample ConfigFree Launcher coming back into view ConfigFree Utilities Connectivity Doctor The Connectivity Doctor lets you analyze your network connections and fix network-connection problems. Using Connectivity Doctor, you can view detailed network...
Page 273 Using ConfigFree™ with your Toshiba Computer The Connectivity Doctor works with the following network devices: Wired and wireless network devices Routers, hubs, and bridges Access points The Connectivity Doctor displays the following information: WEP (Used, not Used) Wired connection line (link speed)
Page 274 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample viewing device information If a problem or potential problem is detected, in most cases, a screen automatically displays showing you the possible cause and solution for the problem. A triangle containing an exclamation point also appears on the Connectivity Doctor screen and an orange frame describes the relevant location.
Page 275: Search For Wireless Devices
Using ConfigFree™ with your Toshiba Computer The following check boxes and buttons are provided on the Connectivity Doctor screen: Stay on the task tray Options About Help Close Search for Wireless Devices The Search for Wireless Devices utility searches for wireless...
Page 276 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities For Wi-Fi networks, the intensity of a signal is displayed in five levels or “bands.” The signal from the connected access point is displayed in the bands surrounding the PC icon at the center of the map.
Page 277 Using ConfigFree™ with your Toshiba Computer Creating a new wireless connection This feature is only supported on systems running Windows NOTE XP SP2. To add a new wireless connection to an Access Point: Open the Search for Wireless Devices option from ConfigFree Launcher.
Page 278 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample Wireless settings screen Enter the SSID/WEP information and connect to the device. After the Access Point is set up and added to the connection NOTE list, the system displays the Connection screen rather than the Wireless settings screen.
Page 279 Using ConfigFree™ with your Toshiba Computer Sample viewing Bluetooth devices You can connect to devices shown on the Bluetooth map: Drag and drop the device you want to connect to the PC icon at the center of the map. Configured devices are automatically connected. Devices...
Page 280 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample dragging the file to the Bluetooth device icon To be prompted for the device: Drag and drop the file to the Bluetooth radar icon on the ConfigFree Launcher. Sample dragging the file to the Bluetooth radar icon Or, you can right click on the file and select Send to Bluetooth Devices.
Page 281: Profile Settings
Using ConfigFree™ with your Toshiba Computer Sample selecting Send to Bluetooth Devices option Choose a file recipient. Click Send. During a file transfer, connecting and disconnecting to the NOTE selected device will occur automatically. Disconnecting from a Bluetooth device To disconnect from a Bluetooth device: Place the cursor on top of the connected line.
Page 282 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities office and at home can set up profiles to handle these networking environments. A profile contains the currently configured network settings on the computer, as well as information about any network devices. The following settings can be saved (or “captured”) in a profile: Internet settings —...
Page 283 Using ConfigFree™ with your Toshiba Computer Click the icon at the bottom of the screen to display more capture options. Under Captured Items, select the items you want to capture for this profile. If connecting with a wireless network, select the desired Auto Switch Settings.
Page 284: Configfree Summit
Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample expanded Add Profile screen The online help provides real-world examples of setting up NOTE profiles for different networking environments. After you set up one or more profiles, you can check their settings and fine-tune them as necessary.
Page 285 Using ConfigFree™ with your Toshiba Computer Use this utility, which handles files regardless of size, to distribute presentations, reports, or music files to meeting attendees or to users at different locations. The SUMMIT utility uses the following types of connections:...
Page 286 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample of users attending SUMMIT meeting (user icons appear on SUMMIT table) Files can be shared with one user or all users attending the meeting. To share a file with one user, drag and drop the file on the user’s icon.
Page 287 Using ConfigFree™ with your Toshiba Computer Sample of sharing a file with one user To share a file with all users, drag the file to the center of the SUMMIT table where users can access it as desired. If you are the Host of the summit, and drag a file to the center...
Page 288 Using ConfigFree™ with your Toshiba Computer ConfigFree Utilities Sample of sharing a file with all users Participating users must be connected by LAN, wireless LAN, NOTE or Bluetooth (PAN). Firewall software may prevent ConfigFree SUMMIT from working. Using ConfigFree SUMMIT...
Page 289: Quick Connect
“Direct Link Toshiba Device” on page Quick Connect The Quick Connect feature includes two options: Toshiba Wireless Projector. Switches the Wireless LAN connection to connect to a Toshiba Wireless Projector Direct Link Toshiba Device. Launches ConfigFree SUMMIT ConfigFree Utilities 292.
Page 290 (DPJ), then click Connect. Launching Quick Connect prevents you from using the network to connect to a Toshiba Wireless Projector when the wireless LAN Configuration is set to Ad hoc. If you are connected to an access point, the connection is broken and re- established later.
Page 291 Using ConfigFree™ with your Toshiba Computer The default connection setting is for Ad hoc mode, therefore, if NOTE the setting on the Toshiba Wireless Projector is in Infrastructure mode, it will not connect, however; you can change the settings to Infrastructure mode to match the settings on the projector.
Page 292 If you close ConfigFree. Direct Link Toshiba Device When Access Point is not available, use the Direct Link Toshiba Device feature to connect your computer in ad-hoc (peer-to-peer) mode and use the Summit feature. To use this feature: Display the ConfigFree menu.
Page 293: Using The Automatic Switch
Using ConfigFree™ with your Toshiba Computer Using the Automatic Switch The Automatic Switch feature allows the computer to automatically switch profiles the next time it is powered on. This feature is particularly useful if you want your computer to automatically switch from the network configuration you use in your office to the one you use at home.
Page 294: Semi-Automatic Switch Feature
Using ConfigFree™ with your Toshiba Computer Semi-Automatic Switch Feature Semi-Automatic Switch Feature The Semi-Automatic feature alerts you when the computer connects to a Service Set Identifier (SSID) stored in a profile, When the computer connects to the designated SSID, a notification window appears.
Page 295: Glossary
Glossary TECHNICAL NOTE: Some features defined in this glossary may not be available on your computer. Acronyms The following acronyms may appear in this user’s guide. BIOS CD-ROM CD-RW CMOS COM1 COM2 alternating current basic input/output system bits per second compact disc compact disc read-only memory compact disc rewrite memory...
Page 296 Glossary DIMM DSTN DVD-ROM digital versatile (or video) disc read-only memory EPROM HTML IEEE LPT1 MIDI PCMCIA direct memory access dual inline memory module disk operating system dots per inch dual supertwist nematic digital versatile (or video) disc enhanced capabilities port erasable programmable read-only memory file allocation table Federal Communications Commission...
Page 297: Terms
SCSI SDRAM SRAM SVGA Terms The following terms may appear in this user’s guide. active-matrix display — A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix technology. Also known as a “TFT display,” in its simplest form there is one thin film transistor (TFT) for each cell.
Page 298 Glossary application — A computer program that you use to perform tasks of a specific type. Applications include word processors, spreadsheets, and database management systems. See also program. backup — A copy of a file, usually on a removable disk, kept in case the original file is lost or damaged.
Page 299 byte — A sequence of eight bits. A byte is the smallest addressable unit of data. See also bit, gigabyte, kilobyte, megabyte. cache — A section of very fast memory in which frequently used information is duplicated for quick access. Accessing data from cache is faster than accessing it from the computer’s main memory.
Page 300 Glossary controller — A device that controls the transfer of data from a computer to a peripheral device and vice versa. For example, disk drives, monitors, keyboards, and printers all require controllers. CPU — See central processing unit (CPU). CPU cache — A section of very fast memory residing between the CPU and the computer’s main memory that temporarily stores data and instructions the CPU will need to execute commands and programs.
Page 301 disk — A round, flat piece of material that can be magnetically influenced to hold information in digital form, and used in the production of magnetic disks, such as diskettes and hard disks. Compare disc. See also diskette, hard disk. disk drive —...
Page 302 Glossary DVD-ROM (digital versatile [or video] disc read-only memory) — A very high-capacity storage medium that uses laser optics for reading data. Each DVD-ROM can hold as much data as several CD-ROMs. Compare CD-ROM. emulation — A technique in which a device or program imitates another device or program.
Page 303 — The physical components of a computer system. Compare software. Hibernation — A feature of many Toshiba notebook computers that saves to the hard disk the current state of your work, including all open files and programs, when you turn the computer off. When you turn on the computer again, your work is returned to the same state it was when the computer was turned off.
Page 304 Glossary high-density diskette — A 3.5-inch diskette that holds 1.44 MB of data. See also diskette. hot key — (1) A feature in which certain keys in combination with the key can set system options or control system parameters, such as the battery save mode.
Page 305 liquid crystal display (LCD) — A type of display that uses a liquid substance between two transparent electrode panels. When an electric current passes through the electrodes, the molecules in the liquid form a crystalline pattern that polarizes the light passing through it.
Page 306 Glossary multi-function drive — A DVD drive that can read and write to CD and DVD media. multimedia — A combination of two or more media, such as sound, animation, and video in a computer program or presentation. Musical Instrument Digital Interface — See MIDI. network —...
Page 307 peripheral — Any device, such as a printer or joystick, that is attached to the computer and controlled by the computer’s CPU. pixel — Short for “picture element.” The smallest dot that can be produced on a screen or printer. Plug and Play —...
Page 308 Glossary resolution — A measure of the sharpness of the images that can be produced by a printer or displayed on a screen. For a printer, resolution is expressed in dots per inch (dpi). For a screen, it is expressed as the number of pixels available horizontally and vertically.
Page 309 “greater than” sign) indicating where users are to enter commands. Toshiba tablet pen — The writing instrument used with the tablet. It is stored on the right side of the computer. TFT display — See active-matrix display.
Page 310: Index
127 monitoring power 126 not charging 229 power usage mode 129 remaining power 127 unlocking 134 computer BIOS Setup 188 See also Toshiba Hardware Setup Bluetooth 152 module 152 button power 64 buttons CD Player 104 creating 105...
Page 311 IRQ 225 checking device properties 227 cleaning the computer 85 click 56 COM port 148 command Shut down 108 Turn Off 108 communications network connection 150 system resources 225 compact discs removing 105 computer lock 85 non-system disk or disk error message 221 not accessing disk drives 220 setting up 46...
Page 312 Index disposing of used batteries 137 DMA (Direct Memory Access) 225 double-click 56 downloading 156 DVD player general problems 247 DVD-ROM drive opening 101 problems 237 troubleshooting 237 using 99 DVD-ROM or multi-function drive removing 105 DVD-ROM/multi-function drive problems 237 email 156 environment computer-friendly 42...
Page 313 Windows XP 223 Hibernation command 109 enabling 113 Hibernation mode 109 methods 113 hot key display brightness 265 display modes 265 display output settings 78 hibernation mode 264 instant password 209 keyboard 267 password security 261 power usage mode 262 Stand By mode 263 volume mute 261 wireless device enable/disable...
Page 314 Index resetting port to default settings upgrading 148 modes Hibernation 109 Stand By 109 module Bluetooth 152 Wi-Fi 152 monitor adjusting display 81 connecting 78 not working 232 mouse connecting USB-compatible 73 moving the computer 85 network accessing 150 Dial-Up Networking Wizard OPTIMIZE 181 optional additional equipment carrying case 139...
Page 315 227 computer hangs when PC Card inserted 240 computer will not power up 219 contacting Toshiba 257 corrupted/damaged data files Device Manager 226 disabling a device 227 disk drive is slow 235 display is blank 232...
Page 316 Toshiba Toshiba Accessories disk drive TOSHIBA Assist 178 TOSHIBA Button Controls 198 Toshiba Dual Pointing Device 55 Toshiba Hardware Setup 188 Toshiba Rotation Utility 190 Toshiba tablet pen 162 traveling tips 139 problem solving 238 connecting external 157 using 116...
Page 317 73 mouse connecting 73 printer connecting 74 User password 210 using Bluetooth 152 using the Toshiba Dual Pointing De- vice 55 utilities Fn-esse 173 Hot key utility 177 Power Management 185 volume control 157 Web address 155 Web browsers 154...

This manual is also suitable for:

M4-s435 M4-s635 M4-st1112 M4-s315 M4-s115td M4-s335 ... Show all

Toshiba M4 User Manual

Chapter 1: Getting Started

Chapter 2: Learning the Basics

Chapter 3: Mobile Computing

Chapter 4: Exploring Your Computer's Features

Chapter 5: Toshiba Utilities

Chapter 6: Keeping Your Files Safe

Chapter 7: If Something Goes Wrong

Appendix A: Hot Keys

Appendix B: Power Cord/Cable Connectors

Appendix C: Using Configfree™ with Your Toshiba Computer

Quick Links

Related Manuals for Toshiba M4

Summary of Contents for Toshiba M4